TS53Y Vishay Sfernice Surface Mount Miniature Trimmers Single-Turn Cermet Sealed FEATURES • 0.20 Watt at 85°C • GAM T1 • For PCB version see T53Y series • Excellent stability • Wide ohmic range • Low temperature coefficient • Low contact resistance variation • Small size for optimum packing density The TS53 trimming potentiometer has been designed for surface mount applications and offers volumetric efficiency (5 x 5 x 2.7 mm) with high performance and stability. • Suitable for both manual or automatic operation The TS53 design is suitable for both manual or automatic operation, and can withstand waves, vapor phase and reflow soldering techniques. DIMENSIONS in millimeters RECOMMENDED SOLDERING AREAS TS53YL TS53YJ TS53YJ TS53YL 2 2 b 1.3 b 2 5 1.3 0.20 5 1.3 2 c 1.3 6.4 4 5.5 2.7 Ø 2.5 MAX c 2.7 a 0.20 a 2.3 2.3 Ø 2.5 MAX 5.5 ADHESIVE PAD (detail) 3.2 0.10 L VERSION J VERSION 1.1 0.10 0.9 X 0.20 1 X 0.20 a 0.65 5 2.30 b 103 0.9 X 0.20 1 X 0.20 Ø 2.5 adhesive pad A6 b a 5 c 2.30 c CIRCUIT DIAGRAM cruciform screwdriver slot ø 2.5, width 0.5 deep: 0.55 max deep (center): 0.7 www.vishay.com 18 a c (1) (3) CW b (2) For technical questions, contact: [email protected] cruciform screwdriver slot ø 2.5, width 0.5 deep: 0.55 max deep (center): 0.7 Document Number: 51008 Revision: 19-Jan-04 TS53Y Vishay Sfernice Surface Mount Miniature Trimmers Single-Turn Cermet Sealed ELECTRICAL SPECIFICATIONS Resistive Element Cermet Electrical Travel 220° ± 15° 10Ω to 1MΩ Resistance Range Standard Series 1-2-5 Tolerance Standard Power Rating ± 20% Linear 0.25W at 70°C Logarithmic not applicable Temperature Coefficient See Standard Resistance Element Data Limiting Element Voltage (Linear Law) 200V 1% or 3Ω Contact Resistance Variation 0.1% or 3Ω End Resistance (Typical) Dielectric Strength (RMS) 1000V Insulation Resistance 106MΩ MECHANICAL SPECIFICATIONS 270° ± 10° 1.5 3.5 0.15 0.25 ENVIRONMENTAL SPECIFICATIONS Temperature Range Climatic Category Sealing – 55°C to + 125°C 55 / 125 / 56 sealed container solder immersion IP67 RATED POWER IN WATT Mechanical Travel Operating Torque (max. Ncm) End Stop Torque (max. Ncm) Unit Weight (max. g) POWER RATING CHART 0.2 0.15 0.1 0.05 0 0 20 40 60 70 85 100 120 140 155 AMBIENT TEMPERATURE IN DEGREES CELSIUS PERFORMANCE TYPICAL VALUES AND DRIFTS TESTS Load Life Moisture Resistance Thermal Shock Rotational Life (Electrical and Mechanical) Vibration Document Number: 51008 Revision: 19-Jan-04 1000 hours at rated power 90'/30' - ambient temperature + 85°C ± 2% MIL STD 202 Method 106 10 cycles of 24 hours constituted with damp heat - cold - vibrations ±2% Temperature 40°C - RH 93 % 56 days Long Term Damp Heat Shock ∆RT (%) RT CONDITIONS ∆R1-2 (%) R1-2 ±3% Contact resistance variation: ∆R < 1% Rn ±3% Dielectric strength: 1000 V RMS Insulation resistance: > 104 MΩ ±2% ±3% Dielectric strength: 1000 V RMS Insulation resistance: > 104 MΩ 55°C to + 125°C - 5 cycles ±1% ∆V1-2 ≤ ± 2% V1-3 100 cycles - rated power ±3% MIL STD 202 Method 213/1 100 g - 6 ms 3 successive shocks in 3 directions ±1% ∆V1-2 V1-3 MIL STD 202 Method 204/D 20 g - 12 hours ±1% ∆V1-2 ≤ ± 1% V1-3 For technical questions, contact: [email protected] ≤ ± 1% www.vishay.com 19 TS53Y Vishay Sfernice Surface Mount Miniature Trimmers Single-Turn Cermet Sealed MARKING STANDARD RESISTANCE ELEMENT DATA LINEAR LAW STANDARD RESISTANCE VALUES MAX. MAX. MAX. CUR. POWER WORKING THROUGH AT 85°C VOLTAGE ELEMENT T.C. –55°C +125°C Ω W V mA ppm/°C 10 20 50 0.20 1.41 2 3.16 141 100 63 0 + 200 4.47 6.32 10 14.1 20 31.6 44.7 63.2 100 141 200 200 200 45 32 20 14 10 6.3 4.5 3.2 2 1.4 1 0.4 0.2 100 200 500 1k 2k 5k 10k 20k 50k 100k 200k 500k 1M 0.2 0.2 0.2 0.08 0.04 VISHAY trademark, ohmic value, manufacturing date. The ohmic value is indicated by a 3 figure code, the first two are significant figures, the third one is the multiplier. Example: 100 = 10Ω 101 = 100Ω 102 = 1000Ω 503 = 50000Ω SOLDERING RECOMMENDATIONS Vapor phase: 215°C/20 to 40 seconds. Reflow: 230°C/20 seconds. Do not exceed peak 260°C or with an IRON 40W: 3 seconds at 350°C. ± 100 Soldering is possible by wave, reflow and vapor phase. PACKAGING On tape and reel of 500 pieces, code TR and 2000 pieces, code TR1 2 3 solts - width 2 to 120° - ø ext. 23 Ø 12.7 Ø 70 Ø 178 ±2 13 8 5.2 0.3 7.6 12 2 5.5 4 1.75 3.2 Ø 1.5 Cover tape panel strength specifications EIA 481 A and CEI 60286-3. ORDERING INFORMATION TS53 SERIES 500KΩ OHMIC VALUE YL STYLE ± 20% TOLERANCE TR500 PACKAGING TR: Tape and reel 500 pcs. on request: TR1: Tape and reel 2000 pcs. SAP PART NUMBERING GUIDELINES T S MODEL 5 3 Y L STYLE 5 0 OHMIC VALUE 4 M TOL R 1 PACKAGING CODE 0 SPECIAL (IF APPLICABLE) See the end of this data book for conversion tables www.vishay.com 20 For technical questions, contact: [email protected] Document Number: 51008 Revision: 19-Jan-04