TS5Y Vishay Sfernice Surface Mount Miniature Trimmers Single-Turn Cermet Fully Sealed FEATURES • 0.25 W at 70 °C • CECC 41100 RoHS • GAM T1 COMPLIANT • Professional grade • Wide ohmic range (10 Ω to 1 MΩ) • Full sealing The TS5 trimming potentiometer has been designed for surface mount applications and offers volumetric efficiency (5 x 5 x 2.7 mm) with high performance and stability. • Low contact resistance variation (1 % or 3 Ω) • Small size for optimum packing density • Suitable for both manual or automatic operation The TS5 design is suitable for both manual or automatic operation, and can withstand wave and reflow soldering techniques. DIMENSIONS in millimeters RECOMMENDED SOLDERING AREAS TS5YL TS5YL TS5YJ TS5YJ 2 2 b 1.3 5 0.20 1.3 5.5 2.7 2.7 4 1.3 2 0.20 1.3 6.4 b 2 5 Ø 2.5 MAX 5.5 Ø 2.5 MAX c c a a 2.3 2.3 ADHESIVE PAD (detail) 3.2 0.10 0.9 X 0.20 1 X 0.20 0.65 b 5 J VERSION1.1 0.10 a A6 b 0.9 × 0.20 1 × 0.20 a 5 2.30 Ø 2.5 adhesive pad 103 2.30 c c CIRCUIT DIAGRAM a c (1) (3) CW b cruciform screwdriver slot ø 2.5, width 0.5 deep: 0.55 max deep (center): 0.7 Document Number: 51007 Revision: 27-Jun-07 (2) Tolerance unless otherwise specified ± 0.25 mm For technical questions, contact: [email protected] www.vishay.com 15 TS5Y Surface Mount Miniature Trimmers Single-Turn Cermet Fully Sealed Vishay Sfernice ELECTRICAL SPECIFICATIONS Resistive Element Cermet Electrical Travel 220° ± 15° 10 Ω to 1 MΩ Resistance Range Standard Series 1-2-5 Tolerance Standard ± 10 % Power Rating Linear 0.25 W at 70 °C Logarithmic not applicable Temperature Coefficient See Standard Resistance Element Data Limiting Element Voltage (Linear Law) 200 V 1 % or 3 Ω Contact Resistance Variation End Resistance (Typical) 0.1 % or 3 Ω Dielectric Strength (RMS) 1000 V Insulation Resistance 1 GΩ Specification in accordance with CECC 41100 MECHANICAL SPECIFICATIONS POWER RATING CHART 270° ± 10° 1.5 3.5 0.15 0.25 0.2 ENVIRONMENTAL SPECIFICATIONS Temperature Range Climatic Category Sealing - 55 °C to + 125 °C 55/125/56 fully sealed container solder immersion IP67 RATED POWER IN W Mechanical Travel Operating Torque (max. Ncm) End Stop Torque (max. Ncm) Unit Weight (max. g) 0.15 0.1 0.05 0 0 20 40 60 70 85 100 120 140 155 AMBIENT TEMPERATURE IN °C PERFORMANCE TYPICAL VALUES AND DRIFTS TESTS ΔR1-2 (%) R1-2 ΔRT (%) RT CONDITIONS 1000 hours at rated power 90'/30' - ambient temperature + 70 °C ±2% ±2% ±3% Climatic Sequence Phase A dry heat 125 °C Phase B damp heat Phase C cold - 55 °C Phase D damp heat 5 cycles Temperature 40 °C - RH 93 % 56 days ±2% ±3% Long Term Damp Heat Load Life Thermal Shock 55 °C to + 125 °C - 5 cycles Rotational Life (Electrical and Mechanical) Shock Vibration www.vishay.com 16 100 cycles - rated power ±3% Contact resistance variation: ΔR < 1 % Rn Dielectric strength: 1000 V RMS Insulation resistance: > 104 MΩ ±1% ΔV1-2 ≤±2% V1-3 ± (3 % + 5 Ω) 50 g - 11 ms 3 successive shocks in 3 directions ±1% ΔV1-2 ≤±1% V1-3 10 - 55 Hz 0.75 mm or 10 g - 6 hours ±1% ΔV1-2 ≤±1% V1-3 For technical questions, contact: [email protected] Document Number: 51007 Revision: 27-Jun-07 TS5Y Surface Mount Miniature Trimmers Single-Turn Cermet Fully Sealed MARKING (RED MARK) STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES LINEAR LAW MAX. MAX. CUR. MAX. POWER WORKING THROUGH AT 70 °C VOLTAGE ELEMENT Ω W V mA 10 20 50100 200 500 1K 2K 5K 10K 20K 50K 100K 200K 500K 1M 0.25 1.58 2.24 3.545.00 7.07 11.2 15.8 22.4 35.4 50.0 70.7 112 158 200 200 200 158 112 7150 35 22 16 11 7 5 3.5 2.2 1.6 1.0 0.4 0.2 0.25 0.20 0.08 0.04 Vishay Sfernice VISHAY trademark, ohmic value, manufacturing date, red mark. TYPICAL TCR - 55 °C + 125 °C The ohmic value is indicated by a 3 figure code, the first two are significant figures, the third one is the multiplier. Example: 100 = 10 Ω 101 = 100 Ω 102 = 1000 Ω 503 = 50 000 Ω ppm/°C SOLDERING RECOMMENDATIONS see Application notes ± 100 PACKAGING On tape and reel of 500 pieces, code TR and 2000 pieces, code TR1 3 solts - width 2 to 120° - ø ext. 23 2 Ø 12.7 Ø 70 Ø 178 ±2 13 8 0.3 5.2 7.6 12 2 5.5 4 1.75 3.2 Ø 1.5 Cover tape panel strength specifications EIA 481 A and CEI 60286-3. ORDERING INFORMATION TS5 SERIES YL STYLE 500 kΩ OHMIC VALUE ± 10 % TOLERANCE TR500 PACKAGING e3 LEAD FINISH TR: Tape and reel 500 pcs TR1: Tape and reel 2000 pcs e3: pure Sn SAP PART NUMBERING GUIDELINES T S 5 MODEL Y L 5 STYLE 0 OHMIC VALUE 4 K TOL R 1 PACKAGING CODE 0 SPECIAL (IF APPLICABLE) See the end of this data book for conversion tables Document Number: 51007 Revision: 27-Jun-07 For technical questions, contact: [email protected] www.vishay.com 17 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1