STV9303 PULSE DRIVEN VERTICAL BOOSTER .. .. .. . ADVANCE DATA OUTPUT CURRENT UP TO 2.5App 70V MAXIMUM FLYBACK VOLTAGE INTERNAL FLYBACK GENERATOR INTERNAL REFERENCE VOLTAGE GENERATOR INTERNAL RAMP GENERATOR SAWTOOTH STARTED BY THE END OF SYNC PULSE OR BY AN INTERNAL MONOSTABLE THERMAL PROTECTION CLIPWATT 11 (Plastic Package) ORDER CODE : STV9303W DESCRIPTION The STV9303 is a pulse driven vertical booster intended for use in color TV. It includes a vertical ramp generator specially designed to fit with deflection processors like STV2102 or STV2110 which provide a 10.5 line lengh vertical pulse. The discharging of the sawtooth capacitor is triggerred by the trailing edge of the vertical sync and the charging by the leading edge. During the sync pulse duration, the sawtooth will remains at its bottom value. Another possibility is to use the internal monostable (by connecting an external capacitor on Pin 5) to define the point where the sawtooth will restart. This second possibility is very usefull to avoid interlacing problems when using a conventional deflection processor delivering a small duration vertical pulse. The STV9303 includes a very efficient power amplifier for direct driving of a TV picture tube in B & W or color television. For power consumption saving, a flyback generator is also included. The current and voltage capabilities (2.5App max output current and 70V flyback peak voltage), make this IC also suitable for large screen TV sets. Thermal protection is also provided. SIP10 (Plastic Package) ORDER CODE : STV9303 September 1993 This is advance information on a new product now in development or undergoing evaluation. Details are subject to change without notice. 1/6 STV9303 PIN CONNECTIONS CLIPWATT11 11 FLYBACK GENERATOR 10 SUPPLY VOLTAGE 9 INVERTING INPUT 8 BUFFER OUTPUT 7 RAMP GENERATOR 6 GROUND 5 MONOSTABLE CAPACITOR 4 HEIGHT ADJUSTMENT 3 TRIGGER INPUT 2 OUTPUT STAGE POWER SUPPLY 1 POWER OUTPUT SIP10 10 9 8 7 6 5 4 3 2 1 FLYBACK GENERATOR SUPPLY VOLTAGE INVERTING INPUT BUFFER OUTPUT GROUND HEIGHT ADJUSTMENT TRIGGER INPUT OUTPUT STAGE POWER SUPPLY POWER OUTPUT 9303V-02.EPS/9303V-01.EPS RAMP GENERATOR BLOCK DIAGRAM (CLIPWATT) VS 10 2 VOLTAGE REGULATOR FLYBACK GENERATOR RAMP GENERATOR CLOCK PULSE 2/6 GENERATOR POWER POWER AMP BUFFER STAGE 11 FLYBACK 1 OUTPUT 4 7 8 5 9 6 SAWTOOTH HEIGHT SAWTOOTH CAPACITOR SAWTOOTH OUTPUT MONO. CAPACITOR INVERTING INPUT GROUND THERMAL PROTECTION 9303V-03.EPS SYNC 3 INPUT VS OUTPUT STAGE STV9303 Symbol VS VF, VO VIIOP I11 I11 V3 Tstg Tj Parameter Supply Voltage Flyback Voltage Amplifier Input Voltage Peak Output Current Flyback DC Current at VO < VS Flyback Peak Current (f = 50 or 60Hz, Tfly < 1.5ms) Trigger Input Voltage Storage Temperature Junction Temperature PIns 10 1-2 9 1 11 11 3 Value 35 70 VS 1.5 100 1.8 VS -40, +150 Internally limited Unit V V V A mA A V o C Value Unit 9303V-01.TBL ABSOLUTE MAXIMUM RATINGS (CLIPWATT Pin Connections) Symbol Parameter Tpt Junction Temperature at Thermal Shutdown Typ. 140 o C Tph Thermal Protection Hysteresis Typ. 25 o C Rth (j-c) Junction-case Thermal Resistance CLIPWAT11 SIP10 Max. Max. o C/W o 3 10 C/W 9303V-02.TBL THERMAL DATA ELECTRICAL CHARACTERISTICS (CLIPWATT Pin Connections) (VS = 35V, Tamb = 25oC, unless otherwise specified) V1H V4 dV4/VS dV4/dI4 VR VD11-10 VD1-2 GV Vfs V11 V3 V8 I1 V7M I7 K1 tdo Parameter Pin 2 Quiescent Current Pin 10 Quiescent Current Ramp Generator Bias Current Ramp Generator Current Ramp Generator Linearity Out Saturation Voltage to GND Out Saturation Voltage to VS Reference Voltage Reference Voltage Drift versus VS Reference Voltage Drift versus I4 Internal Reference Voltage Diode Fwd Voltage Diode Fwd Voltage Output Stage Open Loop Gain V10-11 Saturation Voltage Pin 11 Saturation Voltage Trigger Input Threshold Sawtooth Pedestall Voltage Peak-to-peak Operating Current Range Max. Voltage on Pin 7 Min. Discharging Current Delay between end of Sync Pulse and beginning of Sawtooth versus value of Capacitor on Pin 5 Max. Delay between end of Sync Pulse and beginning of Sawtooth Capacitor charging without Capacitor on Pin 5 Test Conditions I1 = 0, I11 = 0 I1 = 0, I11 = 0 V7 = 0 V7 = 0, -I4 = 20µA V7 = 0 to 12V, -I4 = 20µA I1 = 0.1A I1 = 1.25A -I1 = 0.1A -I1 = 1.25A -I4 = 20µA VS = 10V to 35V I4 = 10µA to 30µA Min. Typ. 16 15 18.5 20 0.2 0.1 1.2 0.9 1.6 6.6 1 0.1 4.40 1.5 1.5 70 1.5 0.8 3.0 1.85 6.3 4.15 ID = 1.25A ID = 1.25A f = 100Hz -I11 = 1.25A I11 = 20mA 2.6 0.4 12 5 Max. 36 30 1 21.5 1 1 2.0 1.6 3.0 6.9 2 1 4.65 3 3 3.0 2 3.4 2.5 100 2 10 Unit mA mA µA µA % V V V V V mV/V mV/µA V V V dB V V V V A V mA µs/nF 9303V-03.TBL Symbol I2 I10 -I7 -I7 dI7/I7 V1L µs 3/6 STV9303 WAVEFORMS Sync Pulse (Pin 3) Vertical Sawtooth on Pin 7 (Pin 5 NC with CLIPWATT or with SIP10) t do t d = (K1 . Cd) + t 9303V-04.EPS Vertical Sawtooth on Pin 7 with Cd connected on Pin 5 (CLIPWATT only) do APPLICATION CIRCUIT (CLIPWATT) 1000µF 0.1µF 35V VS = 30V 1N4001 10 2 10 0µF 35V VOLTAGE REGULATOR FLYBACK GENERATOR 11 Ry = 12.5Ω TRIG. INP 3 YOKE RAMP GENERATOR CLOCK PULSE POWER AMP 1 1.5Ω BUFFER STAGE Ly = 25mH Iy = 1.6App THERMAL PROTECTION 330Ω YOKE 0.22µF 2.7kΩ 7 8 9 5 * 100nF 180kΩ 220kΩ 8.2kΩ 820kΩ 1000µF 25V 25V 2.2kΩ 100kΩ 100nF 10 0µF 2.7kΩ 56kΩ 4/6 6 * Cd optional to adjust sawtooth start delay 1Ω 9303V-05.EPS 4 STV9303 PACKAGE MECHANICAL DATA 11 PINS - PLASTIC CLIPWATT H3 C A D L B L1 L2 H1 G1 A B C D E F G G1 H1 H3 L L1 L2 M M1 Min. Millimeters Typ. 0.15 1.50 0.52 0.80 1.70 17 12.00 20.00 17.90 14.40 11.00 2.54 2.54 Max. 3.10 1.10 Min. Inches Typ. Max. 0.122 0.04 0.006 0.059 0.02 0.03 0.066 0.66 0.48 0.79 0.70 0.57 0.43 0.1 0.1 CPW11.TBL M Dimensions G F M1 PM-CPW11.EPS E 5/6 STV9303 PACKAGE MECHANICAL DATA 10 PINS - PLASTIC SIP C c2 L1 L3 D d1 N 1 10 L a1 L2 A M e3 e PM-SIP10.EPS b1 b3 c1 B A a1 B b1 b3 C c1 c2 D d1 e e3 L L1 L2 L3 M N Min. Millimeters Typ. 2.7 Max. 7.1 3 24.8 Min. 0.106 0.5 0.85 Inches Typ. Max. 0.280 0.118 0.976 0.020 1.6 0.033 3.3 0.43 1.32 0.063 0.130 0.017 0.052 23.7 0.933 14.5 2.54 22.86 0.571 0.100 0.900 3.1 0.122 3 17.6 0.118 0.693 0.25 3.2 1 0.010 0.126 0.039 Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No licence is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of SGS-THOMSON Microelectronics. © 1994 SGS-THOMSON Microelectronics - All Rights Reserved Purchase of I2C Components of SGS-THOMSON Microelectronics, conveys a license under the Philips I2C Patent. Rights to use these components in a I2C system, is granted provided that the system conforms to the I2C Standard Specifications as defined by Philips. SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - China - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. 6/6 SIP10.TBL Dimensions