SD1727 (THX15) RF & MICROWAVE TRANSISTORS HF SSB APPLICATIONS .. .. .. . OPTIMIZED FOR SSB 30 MHz 50 VOLTS IMD −30 dB COMMON EMITTER GOLD METALLIZATION POUT = 150 W PEP MIN. WITH 14 dB GAIN .500 4LFL (M164) epoxy sealed ORDER CODE SD1727 BRANDING THX15 PIN CONNECTION DESCRIPTION The SD1727 is a 50 V epitaxial silicon NPN planar transistor designed primarily for SSB communications. This device utilizes emitter ballasting to achieve extreme ruggedness under severe operating conditions. 1. Collector 2. Emitter 3. Base 4. Emitter ABSOLUTE MAXIMUM RATINGS (T case = 25 ° C) Symbol Parameter Value Unit VCBO Collector-Base Voltage 110 V VCEO Collector-Emitter Voltage 55 V VEBO Emitter-Base Voltage 4.0 V Device Current 10 A Power Dissipation 233 W TJ Junction Temperature +200 °C TSTG Storage Temperature − 65 to +150 °C 0.75 °C/W IC PDISS THERMAL DATA RTH(j-c) November 1992 Junction-Case Thermal Resistance 1/7 SD1727 (THX15) ELECTRICAL SPECIFICATIONS (T case = 25 ° C) STATIC Symbol Value Test Conditions Min. Typ. Max. Unit BVCBO IC = 100mA IE = 0mA 110 — — V BVCES IC = 100mA VBE = 0V 110 — — V BVCEO IC = 100mA IB = 0mA 55 — — V BVEBO IE = 10mA IC = 0mA 4.0 — — V ICEO VCE = 30V IE = 0mA — — 5 mA ICES VCE = 60V IE = 0mA — — 5 mA hFE VCE = 6V IC = 1.4A 18 — 43.5 — DYNAMIC Symbol Min. Typ. Max. Unit POUT f = 30 MHz VCE = 50 V ICQ = 100mA 150 — — W G P* POUT = 150 W PEP VCE = 50 V ICQ = 100mA 14 — — dB IMD* ηc* POUT = 150 W PEP VCE = 50 V ICQ = 100mA — — −30 dBc POUT = 150 W PEP VCE = 50 V ICQ = 100mA 37 — — % COB f = 1 MHz VCB = 50 V — — 220 pF Note: The SD1727 is also usable in Class A at 40 V. Typical performance is: = 30 W PEP, G P = 14 dB, IMD = − 40dBc = 30.00 MHz; f 2 = 30.001 MHz P OUT * f1 2/7 Value Test Conditions SD1727 (THX15) TYPICAL PERFORMANCE INTERMODULATION DISTORTION vs POWER OUTPUT PEP POWER OUTPUT PEP vs POWER INPUT COLLECTOR EFFICIENCY vs POWER OUTPUT PEP 3/7 SD1727 (THX15) TYPICAL PERFORMANCE (cont’d) POWER GAIN vs FREQUENCY POWER GAIN vs POWER OUTPUT PEP SAFE OPERATING AREA 4/7 SD1727 (THX15) IMPEDANCE DATA TYPICAL INPUT IMPEDANCE BIAS CRCUIT 5/7 SD1727 (THX15) TEST CIRCUIT - CLASS AB - 30 MHz C1 C2 C3 C4 C5, C6 C7 C8, C12 C9, C11 C15 C10 C13 C14 : : : : : : : Arco 427 Arco 4611 Arco 4615 220pF Arco 4215 Arco 426 100nF 63V L1 L2 L3 L4 L5 L6, L7 L8 : : : : 1nF 470µF 40V 220µF 63V 10nF R MOUNTING CIRCUIT - CLASS AB - 30MHz 6/7 : : : : : 5 Turns Diameter 8mm, 1.3mm Wire, Length 15mm Hair Pin Copper Foil 20 x 5mm, 0.2mm Thick 1 Turn Diameter 10mm, 1.3mm Wire, Length 8mm 6 Turns Diameter 8mm, 1.3mm Wire, Length 25mm 4 Turns Diameter 12mm, 2mm Wire, Length 25mm : Choke : 0.6Ω SD1727 (THX15) PACKAGE MECHANICAL DATA Ref.: Dwg. No.12-0164 Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. © 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A 7/7