Order this document by ULN2803/D The eight NPN Darlington connected transistors in this family of arrays are ideally suited for interfacing between low logic level digital circuitry (such as TTL, CMOS or PMOS/NMOS) and the higher current/voltage requirements of lamps, relays, printer hammers or other similar loads for a broad range of computer, industrial, and consumer applications. All devices feature open–collector outputs and free wheeling clamp diodes for transient suppression. The ULN2803 is designed to be compatible with standard TTL families while the ULN2804 is optimized for 6 to 15 volt high level CMOS or PMOS. OCTAL PERIPHERAL DRIVER ARRAYS SEMICONDUCTOR TECHNICAL DATA MAXIMUM RATINGS (TA = 25°C and rating apply to any one device in the package, unless otherwise noted.) Rating Symbol Value Unit Output Voltage VO 50 V Input Voltage (Except ULN2801) VI 30 V Collector Current – Continuous IC 500 mA Base Current – Continuous IB 25 mA Operating Ambient Temperature Range TA 0 to +70 °C Tstg – 55 to +150 °C TJ 125 °C Storage Temperature Range Junction Temperature A SUFFIX PLASTIC PACKAGE CASE 707 PIN CONNECTIONS RθJA = 55°C/W Do not exceed maximum current limit per driver. ORDERING INFORMATION 1 18 2 17 3 16 4 15 5 14 6 13 7 12 8 11 Gnd 9 10 Characteristics D i Device Input Compatibility ULN2803A ULN2804A TTL, 5.0 V CMOS 6 to 15 V CMOS, PMOS VCE(Max)/IC(Max) Operating Temperature Range 50 V/500 mA TA = 0 to + 70°C Motorola, Inc. 1996 MOTOROLA ANALOG IC DEVICE DATA Rev 1 1 ULN2803 ULN2804 ELECTRICAL CHARACTERISTICS (TA = 25°C, unless otherwise noted) Characteristic Symbol Output Leakage Current (Figure 1) (VO = 50 V, TA = +70°C) (VO = 50 V, TA = +25°C) (VO = 50 V, TA = +70°C, VI = 6.0 V) (VO = 50 V, TA = +70°C, VI = 1.0 V) All Types All Types ULN2802 ULN2804 Collector–Emitter Saturation Voltage (Figure 2) (IC = 350 mA, IB = 500 µA) (IC = 200 mA, IB = 350 µA) (IC = 100 mA, IB = 250 µA) All Types All Types All Types Input Current – On Condition (Figure 4) (VI = 17 V) (VI = 3.85 V) (VI = 5.0 V) (VI = 12 V) ULN2802 ULN2803 ULN2804 ULN2804 Input Voltage – On Condition (Figure 5) (VCE = 2.0 V, IC = 300 mA) (VCE = 2.0 V, IC = 200 mA) (VCE = 2.0 V, IC = 250 mA) (VCE = 2.0 V, IC = 300 mA) (VCE = 2.0 V, IC = 125 mA) (VCE = 2.0 V, IC = 200 mA) (VCE = 2.0 V, IC = 275 mA) (VCE = 2.0 V, IC = 350 mA) ULN2802 ULN2803 ULN2803 ULN2803 ULN2804 ULN2804 ULN2804 ULN2804 Min Typ Max – – – – – – – – – – – 1.1 0.95 0.85 1.6 1.3 1.1 – – – – 0.82 0.93 0.35 1.0 1.25 1.35 0.5 1.45 – – – – – – – – – – – – – – – – 13 2.4 2.7 3.0 5.0 6.0 7.0 8.0 Unit µA ICEX 100 50 500 500 VCE(sat) V II(on) mA VI(on) V Input Current – Off Condition (Figure 3) (IC = 500 µA, TA = +70°C) All Types II(off) 50 100 – µA DC Current Gain (Figure 2) (VCE = 2.0 V, IC = 350 mA) ULN2801 hFE 1000 – – – Input Capacitance CI – 15 25 pF Turn–On Delay Time (50% EI to 50% EO) ton – 0.25 1.0 µs Turn–Off Delay Time (50% EI to 50% EO) toff – 0.25 1.0 µs IR – – 50 100 µA VF – 1.5 2.0 V Clamp Diode Leakage Current (Figure 6) (VR = 50 V) Clamp Diode Forward Voltage (Figure 7) (IF = 350 mA) 2 TA = +25°C TA = +70°C MOTOROLA ANALOG IC DEVICE DATA ULN2803 ULN2804 TEST FIGURES (See Figure Numbers in Electrical Characteristics Table) Figure 1. Figure 2. Open Open VCE + IC I h FE in µA ICEX Open DUT DUT Vin IC V VCE Figure 3. Figure 4. Open Open VCE µA Iin µA µA DUT DUT Open Vin Vin Figure 5. Figure 6. VR Open µA IR DUT DUT IC Vin V VCE Open V Figure 7. IF V VF DUT Open MOTOROLA ANALOG IC DEVICE DATA 3 ULN2803 ULN2804 TYPICAL CHARACTERISTIC CURVES – TA = 25°C, unless otherwise noted Output Characteristics Figure 9. Output Current versus Input Current IC , COLLECTOR CURRENT (mA) IC , COLLECTOR CURRENT (mA) Figure 8. Output Current versus Saturation Voltage 600 All Types 400 200 600 All Types 400 200 0 0 0 0.5 1.0 1.5 VCE(sat), SATURATION VOLTAGE (V) 2.0 0 200 400 600 IIN, INPUT CURRENT (µA) 800 Input Characteristics Figure 11. ULN2804 Input Current versus Input Voltage Figure 10. ULN2803 Input Current versus Input Voltage 2.0 IIN , INPUT CURRENT (mA) IIN , INPUT CURRENT (mA) 2.0 1.5 1.0 0.5 0 2.0 2.5 3.0 3.5 4.0 4.5 VIN, INPUT VOLTAGE (V) 5.0 5.5 6.0 1.5 1.0 0.5 0 5.0 6.0 7.0 8.0 9.0 10 VIN, INPUT VOLTAGE (V) 11 12 13 Figure 12. Representative Schematic Diagrams 1/8 ULN2803 2.7 k Pin 10 10.5 k Pin 10 7.2 k 7.2 k 3.0 k 4 1/8 ULN2804 3.0 k MOTOROLA ANALOG IC DEVICE DATA ULN2803 ULN2804 OUTLINE DIMENSIONS A SUFFIX PLASTIC PACKAGE CASE 707–02 ISSUE C 18 10 B 1 9 NOTES: 1. POSITIONAL TOLERANCE OF LEADS (D), SHALL BE WITHIN 0.25 (0.010) AT MAXIMUM MATERIAL CONDITION, IN RELATION TO SEATING PLANE AND EACH OTHER. 2. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 3. DIMENSION B DOES NOT INCLUDE MOLD FLASH. A L C N F H D G K SEATING PLANE MOTOROLA ANALOG IC DEVICE DATA M J DIM A B C D F G H J K L M N MILLIMETERS MIN MAX 22.22 23.24 6.10 6.60 3.56 4.57 0.36 0.56 1.27 1.78 2.54 BSC 1.02 1.52 0.20 0.30 2.92 3.43 7.62 BSC 0_ 15_ 0.51 1.02 INCHES MIN MAX 0.875 0.915 0.240 0.260 0.140 0.180 0.014 0.022 0.050 0.070 0.100 BSC 0.040 0.060 0.008 0.012 0.115 0.135 0.300 BSC 0_ 15 _ 0.020 0.040 5 ULN2803 ULN2804 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–5454 JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315 MFAX: [email protected] – TOUCHTONE 602–244–6609 INTERNET: http://Design–NET.com ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 6 ◊ *ULN2803/D* MOTOROLA ANALOG IC DEVICE DATA ULN2803/D