TDA4951 TV East/ West Correction Circuit for Square Tubes Gm bH Technology: Bipolar Features D Low dissipation D Square generator for parabolic current specially designed for square C.R.T. correction D Static picture width adjustment D Pulse-width modulator D Final stage D-class with energy redelivery D External keystone adjustment (symmetry of the parabola) D Parasitic parabola suppression, during flyback time of D Input for dynamic field correction the vertical sawtooth Ad ro nic C om po ne nt s (beam current change) Figure 1. Block diagram Absolute Maximum Ratings Parameters Supply voltage Pin 6 Supply current Pin 6 Substrate current Pin 5 Power dissipation Tcase = 50°C Storage temperature range Junction temperature TELEFUNKEN Semiconductors Rev. A1, 19-Jul-96 Symbol VS IS –I5 Ptot Tstg Tj Value 35 500 400 500 –25 to +150 –25 to +150 Unit V mA mA mW °C °C 1 (5) TDA4951 Electrical Characteristics VS = 26 V, Tamb = 25°C, test circuits 1 to 5 Difference, figure 2 Current source Saturation voltage Saturation voltage Forward voltage Forward voltage (substrate diode) V DE7 7E–V 7F Test circuit 3 I5 = 400 mA, Test circuit 4 I5 = –100 mA, Test circuit 5 I5 = 400 mA, Test circuit 5 I5 = –100 mA, Test circuit 4 Min. 17 V7A V7C K1 15 3 15.3 7.6 K2 Typ. 24 4.5 8.0 Max. 30 7 8.8 Unit V mA V 16.00 16 15.4 26 16 7 16.7 V Gm bH + + +V Symbol VS IS Vref 34 VDE7 –40 0 nt s Parabola coefficient Test Conditions / Pins Pin 6 Test circuit 1 Pin 6 Test circuit 1 Pin 3 Test circuit figure 2, Pin 7 Ifr f = 0 mA Ifr = 20 mA V 7A–V 7B K1 V 7A–V 7C V 7A–V 7C K2 V 7A–V 7D Pin 8 40 % % mV mA I8 VsatL 100 1 2 V VsatH 0.8 1.5 V VF 1.2 1.7 V V5 0.8 1.2 V Pin 5 Pin 5 om po ne Parameters Supply voltage range Supply current, Reference voltage Voltage at Pin 7 Pin 5 Pin 5 V7 93 7666 V7A Ad ro nic C V7B V7C V7D V7E –60 0 V7F 10 20 35 60 mA IFR Figure 2. Parabola coefficients 2 (5) TELEFUNKEN Semiconductors Rev. A1, 19-Jul-96 Figure 5. Test circuit 2 Ad ro nic C om po ne Figure 3. Test circuit 1 nt s Gm bH TDA4951 Figure 4. Test circuit 3 TELEFUNKEN Semiconductors Rev. A1, 19-Jul-96 Figure 6. Test circuit 4 3 (5) nt s Gm bH TDA4951 Figure 7. Test circuit 5 Ad ro nic C Package: 8-pin dual inline om po ne Dimensions in mm 4 (5) TELEFUNKEN Semiconductors Rev. A1, 19-Jul-96 TDA4951 Ozone Depleting Substances Policy Statement It is the policy of TEMIC TELEFUNKEN microelectronic GmbH to Gm bH 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances ( ODSs). nt s The Montreal Protocol ( 1987) and its London Amendments ( 1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. TEMIC TELEFUNKEN microelectronic GmbH semiconductor division has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. om po ne 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency ( EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively. Ad ro nic C TEMIC can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use TEMIC products for any unintended or unauthorized application, the buyer shall indemnify TEMIC against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. TEMIC TELEFUNKEN microelectronic GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 ( 0 ) 7131 67 2831, Fax number: 49 ( 0 ) 7131 67 2423 TELEFUNKEN Semiconductors Rev. A1, 19-Jul-96 5 (5)