CNY18 TELEFUNKEN Semiconductors Optocoupler with Phototransistor Output Description The CNY18 consists of a phototransistor optically coupled to a gallium arsenide infrared emitting diode in a hermetically sealed 4 lead TO72 metal can package for high reliability requirements. Applications Galvanically separated circuits. Features Hermetically sealed case Current Transfer Ratio, CTR selected in groups DC isolation test voltage: 500 V Low temperature coefficient of the CTR Low coupling capacity Pin Connection A C C E Rev. A1: 20.09.1995 95 10792 1 (5) CNY18 TELEFUNKEN Semiconductors Absolute Maximum Ratings Input (Emitter) Parameters Reserve voltage Forward current Forward surge current Power dissipation Junction temperature Test Conditions tp ≤ 10 s Tamb ≤ 25°C Symbol VR IF IFSM PV Tj Value 3 60 1.5 100 125 Unit V mA A mW °C Symbol VCEO VECO IC PV Tj Value 32 5 100 150 125 Unit V V mA mW °C Symbol VIO 1) Ptot Tamb Tstg Tsd Value 500 250 –55 to +100 –55 to +125 260 Unit V mW °C °C °C Output (Detector) Parameters Collector emitter voltage Emitter collector voltage Collector current Power dissipation Junction temperature Test Conditions Tamb ≤ 25°C Coupler Parameters DC isolation test voltage Total power dissipation Ambient temperature range Storage temperature range Soldering temperature 1) 2 (5) Test Conditions Tamb ≤ 25°C 2 mm from case, t ≤ 10 s related to standard climate 23/50 DIN 50 014 Rev. A1: 20.09.1995 CNY18 TELEFUNKEN Semiconductors Electrical Characteristics Tamb = 25°C Input (Emitter) Parameters Forward voltage Reserve current Test Conditions IF = 60 mA VR = 3 V Type Symbol VF IR Min. Typ. 1.25 0.35 Max. 1.7 10 Unit V mA Test Conditions IC = 1 mA Type Symbol V(BR)CEO Min. 32 Typ. Max. Unit V Output (Detector) Parameters Collector emitter breakdown voltage Collector dark current Collector emitter capacitance VCE = 10 V, IF = 0, E = 0 f = 1 MHz VCE = 0 VCE = 10 V VCE = 30 V ICEO 2 nA CCEO CCEO CCEO 7 3.5 2.5 pF pF pF Coupler Parameters DC isolation test voltage Isolation resistance IC/IF Collector emitter saturation voltage Cut-off frequency Coupling capacitances A and C short-cctd. 1) Test Conditions t=1s VIO = 500 V, 40% relative humidity VCE = 5 V, IF = 10 mA Type Group III IV V IC = 1 mA, IF = 10 mA VCE = 5 V, IF = 10 mA, RL = 100 W f = 1 MHz E and C short-cctd. C (E earthed) E (C earthed) Symbol VIO 1) Min. 500 RIO 1) 1010 CTR CTR CTR VCEsat 0.25 0.40 0.60 Typ. Max. Unit V W 0.50 0.80 1.2 0.2 V fc 170 kHz Ck Ck Ck 1.4 1.1 0.1 pF pF pF related to standard climate 23/50 DIN 50014 Rev. A1: 20.09.1995 3 (5) CNY18 TELEFUNKEN Semiconductors Switching Characteristics VS = 5 V Type td[ms] 2.6 CNY18 IF tr[ms] 2.4 RL = 100 W, see figure 1 RL = 1 kW, see fig. 2 ton[ms] ts[ms] tf[ms] toff[ms] IC[mA] ton[ms] toff[ms] IF[mA] 5.0 0.3 2.7 30 5 11 13.5 20 +5V IF 0 IC = 5 mA; adjusted through input amplitude R G = 50 W tp T = 0.01 t p = 50 ms Channel I Oscilloscope Channel II 50 W R L 1 MW C L 20 pF 100 W 95 10900 Figure 1. Test circuit, non-saturated operation IF +5V IF = 20 mA 0 IC R G = 50 W tp T = 0.01 t p = 50 ms Channel I Oscilloscope Channel II 50 W 1 kW R L 1 MW C L 20 pF 95 10901 Figure 2. Test circuit, saturated operation 4 (5) Rev. A1: 20.09.1995 TELEFUNKEN Semiconductors CNY18 Ozone Depleting Substances Policy Statement It is the policy of TEMIC TELEFUNKEN microelectronic GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances ( ODSs). The Montreal Protocol ( 1987) and its London Amendments ( 1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. TEMIC TELEFUNKEN microelectronic GmbH semiconductor division has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency ( EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively. TEMIC can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use TEMIC products for any unintended or unauthorized application, the buyer shall indemnify TEMIC against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. TEMIC TELEFUNKEN microelectronic GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 ( 0 ) 7131 67 2831, Fax number: 49 ( 0 ) 7131 67 2423 Rev. A1: 20.09.1995 5 (5)