M4S E158859 20.0×9.8×12.0 Features DIL Pitch Terminals .High Sensitivity g Conforms to FCC Part 68 1.5kV Surge and Dielectric 1000VACg Fully sealed (immersion cleaning). High Reliability bifurcated Contact. Application for Telecommunication EquipmentfOffice Equipmentf Security Alarm Systemsf Measuring instrumentsf Medical Monitoring EquipmentfAudio Visual Equipmentf Flight SimulatorfSensor Controlg Ordering Information M4S 12 H A W 1 2 3 4 5 1 Part Mumber:M4 2 Coil Rated Voltage:DC:3:3V;5:5V;6:6V;9:9V; 12:12V;18:18V;24:24V;48:48V Contact Data Contact Arrangement Contact Material Contact Rating (resistive) Max. Switching Power Max. Switching Voltage Contact Resistance Voltage drop Operation Electrical life Mechanical 3 Enclosure:H: Sealed Type 4 Nominal Coil Power:Nil:0.15W;A:0.2W; 5 Contact Material:Nil: AgRu;W: AgNi 2CDPDT(B-M) Bifurcated Crossbar AgRu( Gold clad>) AgNi(Gold clad 2A/30VDC; 0.6A/125VAC 60W 125VA 220VDC 250VAC or አ100m Max. Switching Current:2A Item 3.12 of IEC255-7 310 AgNi 110 108 5 Min. Switching load0.01mA/10mVReference Value 5 Item 3.30 of IEC255-7 Item 3.31 of IEC255-7 CAUTION: Relays previously tested or used above 10mA resistive at 6VDC maximum or peak AC open circuit are not recommended for subsequent use in low level applications. Coil Parameter Coil voltage VDC 33 Pick up voltage VDC(max) (70% or 66%of rated voltage ) release voltage VDC(min) (5% or 10% of rated voltage) Coil power W Rated Max. Coil resistance ±10% M4S-003 3 7.5 60 2.1 0.15 0.15 M4S-005 5 12.5 167 3.5 0.25 0.15 M4S-006 6 15.0 240 4.2 0.3 0.15 M4S-009 9 22.5 540 6.3 0.45 0.15 M4S-012 12 30.0 960 8.4 0.6 0.15 M4S-018 18 40.0 1620 12.6 0.9 0.20 M4S-024 24 52.9 2880 16.8 1.2 0.20 M4S-048 48 84.9 7680 33.6 2.4 0.30 M4S-003A 3 6.5 45 2.1 0.3 0.2 M4S-005A 5 10.8 125 3.5 0.5 0.2 M4S-006A 6 13.0 180 4.2 0.6 0.2 M4S-009A 9 19.5 405 6.3 0.9 0.2 Dash Numbers M4S-012A 12 26.5 720 8.4 1.2 0.2 M4S-024A 24 52.9 2880 16.8 2.4 0.2 M4S-048A 48 103.9 11520 33.6 4.8 0.2 : Operate Time ms Release Time ms 5 3 5 3 www.dblectro.com CAUTION 1 The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay M4S Characteristics Electrostatic capacitance Between open Contacts Between coil & Contacts Between Contact Poles Insulation Resistance Dielectric Strength Approx.0.7pF Approx.1.0pF Approx.0.9pF 1000M min (at 500VDC) Between open Contacts Between coil & Contacts 1000VAC 1min 1000VAC 1min Between Contact Poles Surge Withstand Voltage 1000VAC 1min Item 6 of IEC255-5 Item 6 of IEC255-5 Item 6 of IEC255-5 Between open Contacts Between coil & Contacts Between Contact Poles 1500V 1500V 1500V FCC68 FCC68 FCC68 Item 3.41 of IEC255-7 Item 3.41 of IEC255-7 Item 3.41 of IEC255-7 Item 7 of IEC255-5 Functional:100m/s2 11ms; Survival:1000 m/s2 6ms 10~55Hz Double amplitude FunctionalX1.5mm Survival:5mm 5N 2352 30.5s -40~90(-40~194F) (-40~80 for 0.3W Coil) Shock resistance Vibration resistance Terminals strength Solderability Temperature Range Mass IEC68-2-27 Test Ea IEC68-2-6 Test Fc IEC68-2-21 Test Ua1 IEC68-2-20 Test Ta method 1 4.5g Qualification inspection: Perform the qualification test as specified in the table of IEC255-19-1 and minimum sample size24. Safety approvals Safety approval Load UL&CUR 2A/24VDC 0.6A/125VAC Dimensions mm/inch 2,54 0.1 2,54 0.1 0.787 0.386 4 6 8 16 13 11 9 0.472 1 0.138 0.031 0.787 0.044 0.30 0.20 Tolerance: ±0.1/±0.004 0.01 Wiring diagram 0.20 0.30 (Bottom views) Mounting (Bottom views) Dimensions NOTES 1).Dimensions are in millimeter. 2).Inch equivalents are given for general information only. www.dblectro.com