JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50PMA-011 TRANSCEIVER TEST SYSTEM Frequency Range 20-500 MHz Configuration 17 Port Transceiver Test System (See Block Diagram 092-5391) Impedance 50 Ohms nominal VSWR 1.5:1 maximum Insertion Loss 30 dB nominal Attenuation Range 0-63 dB in 1 dB steps Attenuation Accuracy ± 0.3 dB or 2% of programmed (whichever is greater) Isolation (Power Dividers) 25 dB minimum (port to port) RF Input Power +17 dBm average +30 dBm (1dB compression) Switching Speed 10 microseconds typical (after command is received and processed) (3 milliseconds typical processing time) AC Supply 100-240 VAC @ 47-63 Hz Manual Control Keypad and LCD display Control Ethernet (10/100) and RS-232 Remote Commands Pause Variable Handover Feedback Handover Fade Attenuator Feedback Fade Set Attenuator Read Attenuator Change Baud Rate Identification RF Connector SMA or N female Operating Temperature Range 0º to +70º C Physical Size See outline drawing 092-5390 ECR/ECN # Page 1 of 1 DATE REV APPR / DATE 15789 04/19/2007 04/30/2008 A BAC 04/19/2007 TRS 04/30/2008 15916 05/28/2008 B TRS 05/28/2008 ECR/ECN # 15968 16179 JFW FORM E-7-F REV F DATE 06/04/2008 08/07/2008 (PAUSEx) (VHND Av Aw Vx Vy Tz) (FHND Av Aw Vx Vy Tz) (FAx y z t) (FFAx y z t) (SAx y) (RAx) (CBx) (IDN) REV C D APPR / DATE TRS 06/04/2008 TRS 08/07/2008