JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50PMA-012 TRANSCEIVER TEST SYSTEM Frequency Range 2-6 GHz Configuration 9 Port Transceiver Test System (See block diagram 092-5356) Impedance 50 Ohms nominal Attenuation Range 0-63 dB in 1 dB steps VSWR 1.7:1 maximum < 1.6:1 typical Attenuation Accuracy ± 1.0 dB or 3% (guaranteed monotonic) Insertion Loss 36.0 dB maximum 31.3 dB typical @ 2 GHz 33.9 dB typical @ 6 GHz Power Divider Isolation 21 dB minimum RF Input Power 1 Watt average AC Supply 100-240 VAC @ 47-63 Hz Remote Control RS-232 (9600, 19200, or 38400 Baud) Ethernet (TCP, 10/100, up to 4 users) Remote Commands Variable Handover Fade Attenuator Set Attenuator Read Attenuator Pause Disconnect Close Change Baud Rate Identification RF Connector SMA female Operating Temperature Range 0ºC to +50ºC Physical Size See outline drawing 092-6110 ECR/ECN # Page 1 of 1 DATE 03/03/2009 REV APPR / DATE TRS 03/03/2009 17261 05/28/2009 A TRS 05/28/2009 17302 06/11/2009 B TRS 06/11/2009 ECR/ECN # JFW FORM E-7-F REV F DATE (VHND Av Aw Vx Vy Tz) (FAx y z t) (SAx y) (RAx) (PAUSEx) (DIS) (CLOSE) (CBx) (IDN) REV APPR / DATE