Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3312172073 Item: SIL12-1A72-73L Coil Data at 20 °C Conditions Min Typ Conditions Min Typ Max Unit Max Unit Coil resistance Coil voltage Rated power Pull-In voltage Drop-Out voltage Contact data 66/3 Contact-form Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage ( < 20 AT ) Operate time incl. bounce Release time Capacity Special Product Data Insulation resistance Coil/Contact Dielectric Strength Coil/Contact Housing material Connection pins Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability A not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ! "# Start Value $ % !"! % RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch Conditions & ' * Min Typ () Max RH <45%, 200 VDC test voltage according to IEC 255-5 Unit & + mineral-filled epoxy Copper alloy tin plated Conditions Min Typ Max 1/2 sine wave duration 11ms from 10 - 2000 Hz . .* wave sodering max. 5 sec. ' fully sealed / Unit , , - Modifications in the sense of technical progress are reserved Designed at: 18.12.09 Designed by: THAUKE Approval at: Approval by: Last Change at: 18.12.09 Last Change by: THAUKE Approval at: Approval by: Version: 1