Series 419, 430, 499 SPRING-LOADED CONNECTORS 2,54 Grid Target Connectors for Spring-Loaded Assemblies Double Row Number of Pins X 2,54 / 2 5,08 2,54 • Spring Target connectors present a large flat surface for making tangent connections to our standard 1,07 dia spring pin plungers. The target connectors provide an excellent gold plated conductive path back to the board mounted spring pin connector. 2,54 2,54 1,78 DIA. 2,79 1,35 DIA. • Series 419, 430 and 499 double row strips may be cut to any length. 4,29 Coplanarity 0,13. For Pin Counts >20 positions consult Technical Support. Fig. 1 2,54 • Target connectors use MM #1938, #1940, #1941, #1942 and #3024 pins. See page 185 for details. • Insulators are high temp. thermoplastic. 1,78 DIA. 2,79 4,19 1,35 DIA. Ordering Information 7,37 0,51 DIA. 3,18 Fig. 2 Fig. 1 2,54 Series 419...041 Surface Mount 419-10-2_ _-30-041000 Specify # of pins 1,83 DIA. 2,79 1,35 DIA. 4,19 9,70 0,46 DIA. 5,51 Fig. 2 2,54 Fig. 3 1,83 DIA. 2,79 04-64 Series 419...002 Long Solder Tails 419-10-2_ _-00-002000 Specify # of pins 4,19 1,35 DIA. Series 419...001 Standard Solder Tails 419-10-2_ _-00-001000 Specify # of pins Fig. 3 04-64 04-64 11,2 14,4 0,86 DIA. 0,51 DIA. 3,20 Fig. 4 Series 419...005 Elevated Solder Tails 419-10-2_ _-00-005000 Specify # of pins Fig. 4 2,54 1,83 DIA. Fig. 5 2,79 1,52 2,29 0,97 DIA. HOLE Fig. 6 Fig. 5 Series 430...240 Solder Cups 430-10-2_ _-00-240000 Specify # of pins 7,37 1,35 DIA. 04-64 Series 499...008 Right Angle Solder Tails 499-10-2_ _-10-008000 Specify # of pins 4,19 04-64 04-64 2,79 5,08 2,54 5,74 RoHS 2002/95/EC 4,47 0,46 DIA. 5,59 For Electrical, Mechanical & Enviromental Data, See pg. 4 2,54 Fig. 6 w w w. m i l l - m a x . c o m 10 PLATING CODE = 0,25μm Au Pin Plating 14 516-922-6000