INTERCONNECTS 2,54 Grid Surface Mount Headers and Sockets Single and Double Row 2,54 • Series 329 and 429 pin interconnects offer vertical Surface Mount MM #2956-X solder tails. See page 185 for details. Number of Pins X 2,54 0,46 DIA. • Series 340 Surface mount sockets use MM #4078 pins. Series 414 sockets use MM #1434 pins. See pages 133 and 138 for details. 3,07 7,06 2,79 1,60 DIA. 0,46 • Series 340 and 414 receptacles use HiRel, 4-finger BeCu #30 contacts rated at 3 amps. Receptacles accept 0,38 - 0,64 diameter pins. See page 218 for details. 2,54 Coplanarity 0,13. For Pin Counts >10 positions consult Technical Support. Fig. 1 • Insulators are high temp. thermoplastic. Number of Pins X 2,54 / 2 2,54 RoHS 2002/95/EC Ordering Information 5,08 Series 329...560 0,46 DIA. Series 329, 340, 414, 429 Surface Mount Pin Header 3,07 Fig. 1 7,06 329-10-1_ _-00-560000 2,79 Specify # of pins 0,97 DIA. 0,46 2,54 Series 429...560 Coplanarity 0,13. For Pin Counts >10 positions consult Technical Support. 0,38-0,64 0,25 * 0,46 2,44 Specify # of pins For Electrical, Mechanical & Enviromental Data, See pg. 4 Number of Pins X 2,54 / 2 5,08 2,79 4,22 HOLE 2,54 2,54 Series 414...117 Fig. 3 Coplanarity 0,13. For Pin Counts >10 positions consult Technical Support. Fig. 3 Number of Pins X 2,54 Series 340...780 04-72 Surface Mount Socket 2,54 Fig. 4 2,79 4,37 340-43-1 _ _-30-780100 2,54 5,08 2,29 Specify # of pins 2,79 1,42 1,17 3,18 Surface Mount Socket 414-43-2 _ _-41-117000 Specify # of pins 0,38-0,64 0,25 * 0,46 2,11 For RoHS compliance select plating code. 0,25μm Au Pin Plating 0,64 DIA. 04-72 10 PLATING CODE = 0,97 DIA. Surface Mount Pin Header 429-10-2 _ _-00-560000 Fig. 2 Fig. 2 02-64 Footprint 3,3 For Electrical, Mechanical & Enviromental Data, See pg. 4 2,54 Coplanarity 0,13. For Pin Counts >10 positions consult Technical Support. Fig. 4 w w w. m i l l - m a x . c o m 02-64 For RoHS compliance select plating code. 43 PLATING CODE = Sleeve (Pin) 5,08µm Sn Contact (Clip) 0,76µm Au 76 516-922-6000