INTERCONNECTS Series 870, 871 .070” Grid (.018” dia.) Pins, Right Angle Headers & Sockets Single Row Number of Pins X .070"+.012" • Series 870 use MM #3790-0 pins. See page 176 for details. .104 (TYP) .052 .133 • Series 871 use MM #1805 receptacles and accept pin diameters from .015” .025”. See page 140 for details. .070 Number of Pins X .070 + .012 .110 .104 .018 DIA. .112 • Receptacles use Hi-Rel, 6 finger BeCu #43 contact rated at 3 amps. See page 220 for details. RoHS 2002/95/EC • Insulators are high temp. thermoplastic. .220 .070 Ordering Information Fig. 1 Series 870...20-001 870-10-0_ _-20-001000 Fig. 1 Number of Pins X .070"+.012" .104 (TYP) .052 Right Angle Pin Header Specify # of pins 02-21 .070 .165 .145 .110 Number of Pins X .070 + .012 .104 .052 .018 DIA. .220 .122 .070 Fig. 2 For Electrical, Mechanical & Enviromental Data, See pg. 4 XX=Plating Code See Below SPECIFY PLATING CODE XX= 10 10μ” Au Pin Plating Series 871...20-001 Right Angle Socket 871-43-0_ _-20-001000 Fig. 2 Specify # of pins For Electrical, Mechanical & Enviromental Data, See pg. 4 02-21 XX=Plating Code See Below For RoHS compliance select plating code. 13 93 43 Sleeve (Pin) 10µ” Au 200µ” Sn/Pb 200µ”Sn Contact (Clip) 30µ” Au 30µ” Au 30µ” Au PLATING CODE = w w w. m i l l - m a x . c o m For RoHS compliance select plating code. 69.1 10µ” Au 516-922-6000