DLM10 Ordering number : EN2792B SANYO Semiconductors DATA SHEET DLM10 Silicon Diffused Junction Type 1.0A Ultrahigh-Speed Rectifier Applications • Switching regulators, high-frequency rectification. Features • • • Fast reverse recovery time and small switching loss. Reverse voltage : VRM=200 to 400V. Average rectified current : IO=1.0A. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Peak Reverse Voltage Symbol Conditions DLM10C VRM Average Rectified Current Surge Forward Current IO IFSM DLM10E 200 50Hz, resistive load, no fin, Ta=57°C resistive load 400 1.0 (L=8mm, print land 10✕10mm) 50Hz sine wave, 1cycle Unit V A 30 A Junction Temperature Tj 150 °C Storage Temperature Tstg --40 to +150 °C Electrical Characteristics [DLM10C] at Ta=25°C Parameter Symbol Forward Voltage VF Reverse Current IR Reverse Recovery Time Thermal Resistance (Junction-Ambient) trr Rth(j-a) Conditions Ratings min typ IF=1.0A VRM=200V IFM=1A, --di/dt=50A/µs No heat sink, DLM10 only max Unit 0.98 V 10 µA 35 ns 115 °C / W Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 91907RL TI IM TC-00000895 / 53098 HA (KT)/92995 GI (KOTO)/5108 TA, TS No.2792-1/3 DLM10 Electrical Characteristics [DLM10E] at Ta=25°C Parameter Symbol Forward Voltage VF Reverse Current IR trr Reverse Recovery Time Thermal Resistance (Junction-Ambient) Ratings Conditions min typ IF=1.0A VRM=400V IFM=1A, --di/dt=50A/µs Rth(j-a) Unit max No heat sink, DLM10 only 1.25 V 20 µA 30 ns 115 °C / W 5 7 100 IT12981 Package Dimensions unit : mm (typ) 7811-001 5.2MAX 27.0MIN Cathode mark 27.0MIN 0.8 2.5 IO -- Ta 2.0 IFSM -- n 40 1.6 360° 1.2 Resistance load Since wave 10mm 180° θ 360° 120° 0.8 60° 0.4 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 150 160 IT12980 Surge Forward Current, IFSM -- A Average Output Current, IO -- A L=8mm 180° 30 20 50H z 10 0 1.0 2 3 5 7 10 2 3 Number of Cycles at 50Hz, n No.2792-2/3 DLM10 IF -- VF 10 7 =1 25 °C 1.0 7 5 3 50 °C 2 =1 2 3 Tj Forward Current, IF -- A 50 °C 3 25° C 5 Tj Forward Current, IF -- A DLM10E 7 5 1.0 7 5 3 2 2 0.1 0.1 0 0.4 0.8 1.2 180° DLM10C 360° 120° 1.0 60° 0.8 0.6 0.4 0.2 θ 360° 0 0 0.4 0.8 1.2 Average Output Current, IO -- A 1.6 IT12984 1.0 1.5 2.0 2.5 Forward Voltage, VF -- V Average Forward Power Dissipation, PF -- W Sine wave 180° 0.5 IT12982 PF -- IO 1.4 1.2 0 1.6 Forward Voltage, VF -- V Average Forward Power Dissipation, PF -- W IF -- VF 10 DLM10C PF -- IO 1.4 1.2 IT12983 DLM10E Sine wave 180° 180° 360° 120° 1.0 60° 0.8 0.6 0.4 0.2 θ 360° 0 0 0.4 0.8 1.2 1.6 Average Output Current, IO -- A IT12985 SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of September, 2007. Specifications and information herein are subject to change without notice. PS No.2792-3/3