Ordering number : 0000000 EC3H08B NPN Epitaxial Planar Silicon Transistor EC3H08B High-Frequency Amp Applications, Osc. Applications Preliminary • [EC3H08B] 0.15 0.15 0.05 1 2 0.25 0.4 0.65 • 0.35 0.2 3 0.5 1.0 • Low noise : NF=1.6dB typ (f=2GHz). unit : mm High cut-off frequency : fT=10.0GHz typ (VCE=1V). 0000 : fT=12.0GHz typ (VCE=3V). Low operating voltage. High Gain : S21e2=9.5dB typ (f=2GHz) Ultraminiature (1006 size) and thin (0.5mm) leadless package. 0.05 • Package Dimensions 0.25 • 0.05 Features 0.05 (Bottom view) 0.5 Specifications 0.6 Absolute Maximum Ratings at Ta=25°C Parameter 1 : Base 2 : Emitter 3 : Collector Symbol SANYO : ECSP1006 Conditions Ratings Unit Collector-to- Base Voltage VCBO 9 Collector-to-Emitter Voltage VCEO 4 V Emitter-to-Base Voltage VEBO 2 V 20 mA 80 mW Junction Temperature IC PC Tj 150 °C Storage Temperature Tstg --55 to +150 °C Collector Current Collector Dissipation V Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Symbol Conditions Ratings min typ ICBO IEBO VCB=5V, IE=0 VEB=1V, IC=0 hFE fT(1) VCE=1V, IC=5mA VCE=1V, IC=3mA 100 8.0 10.0 VCE=3V, IC=7mA VCB=1V, f=1MHz 10.0 12.0 Output Capacitance fT(2) Cob Reverse Transfer Capacitance Cre VCB=1V, f=1MHz VCE=1V, IC=3mA, f=2GHz Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Forward Transfer Gain Noise Figure S21e2(1) S21e2(2) NF VCE=3V, IC=7mA, f=2GHz VCE=1V, IC=3mA, f=2GHz max Unit 1.0 µA 10 µA 160 GHz GHz 0.4 0.55 pF 0.27 0.40 pF 8.0 9.5 9.0 10.5 1.6 dB dB 2.5 dB Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN HD Seigi 011023 matumiya-1/2 EC3H08B Marking : L Electrical connection (TOP VIEW) Polarity mark (Top) L Polarity mark Collector Base Collector Emitter Base Emitter ❋ Electrodes : Bottom This product adopts a high-frequency process. Please be careful when handling it beause it is susceptible to static electricity. Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of July, 2000. Specifications and information herein are subject to change without notice. HD Seigi 011023 matumiya-2/2