ETC 2SC5275-3

Ordering number:EN5187
NPN Epitaxial Planar Silicon Transistor
2SC5277
UHF to S Band Low-Noise Amplifier,
OSC Applications
Package Dimensions
unit:mm
2106A
[2SC5277]
0.75
0.6
0.4
0.3
0 to 0.1
0.8
1.6
0.2
0.1
0.5
0.5
0.1max
· Low noise : NF=0.9dB typ (f=1GHz).
: NF=1.4dB typ (f=1.5GHz).
· High gain : S21e2=10dB typ (f=1.5GHz).
· High cutoff frequency : fT=11GHz typ.
· Low-voltage, low-current operation
(VCE=1V, IC=1mA)
: fT=7GHz type.
: S21e2=5.5dB typ (f=1.5GHz).
· Ultrasmall-sized package permitting 2SC5277applied sets to be made small and slim.
0.4
Features
1.6
1 : Base
2 : Emitter
3 : Collector
SANYO : SMCP
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Symbol
Conditions
Ratings
Unit
Collector-to-Base Voltage
VCBO
20
V
Collector-to-Emitter Voltage
VCEO
VEBO
10
V
Emitter-to-Base Voltage
Collector Current
1.5
V
30
mA
Collector Dissipation
IC
PC
100
mW
Junction Temperature
Tj
150
˚C
Storage Temperature
Tstg
–55 to +150
˚C
Electrical Characteristics at Ta = 25˚C
Parameter
Symbol
Conditions
Ratings
min
typ
max
Collector Cutoff Current
ICBO
Emitter Cutoff Current
IEBO
VCB=10V, IE=0
VEB=1V, IC=0
DC Current Gain
hFE
fT1
VCE=5V, IC=10mA
VCE=5V, IC=10mA
fT2
0.45
0.30
Gain-Bandwidth Product
Output Capacitance
Cob
VCE=1V, IC=1mA
VCB=10V, f=1MHz
Reverse Transfer Capacitance
Cre
VCB=10V, f=1MHz
60*
8
Unit
1.0
µA
10
µA
270*
11
GHz
7
GHz
0.7
pF
pF
Continued on next page.
* : The 2SC5277 is classified by 10mA hFE as follows :
Marking
D1
D2
D3
hFE
60 to 120
90 to 180
135 to 270
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
21599TH (KT)/83095YK (KOTO) TA-0413 No.5187–1/5
2SC5277
Continued from preceding page.
Parameter
Forward Transfer Gain
Noise Figure
Symbol
| S21e
|2
Conditions
1
VCE=5V, IC=10mA, f=1.5GHz
Ratings
min
typ
8
10
| S21e |2 2
VCE=1V, IC=1mA, f=1.5GHz
5.5
NF1
VCE=5V, IC=5mA, f=1.5GHz
VCE=2V, IC=3mA, f=1GHz
1.4
NF2
max
0.9
Unit
dB
dB
3.0
dB
dB
No.5187–2/5
2SC5277
S Parameters
No.5187–3/5
2SC5277
S parameters (Common emitter)
VCE=5V, IC=5mA, ZO=50Ω
Freq (MHz)
| S11 |
∠ S11
| S21 |
∠ S21
| S12 |
∠ S12
| S22 |
∠ S22
200
0.782
–37.1
12.043
148.4
0.038
69.7
0.889
–19.5
400
0.623
–65.4
9.431
126.6
0.057
60.8
0.758
–28.3
600
0.502
–85.6
7.415
112.2
0.072
56.5
0.646
–33.3
800
0.420
–102.4
6.000
101.5
0.083
55.2
0.577
–35.9
1000
0.369
–114.7
5.025
93.6
0.094
55.1
0.538
–37.6
1200
0.339
–127.2
4.323
86.7
0.105
55.6
0.513
–38.7
1400
0.311
–137.2
3.785
80.6
0.115
55.6
0.490
–39.7
1600
0.296
–144.9
3.391
75.3
0.127
55.7
0.480
–41.3
1800
0.285
–156.5
3.018
70.1
0.139
56.4
0.466
–43.5
2000
0.277
–164.2
2.767
65.7
0.150
56.7
0.460
–45.5
VCE=5V, IC=10mA, ZO=50Ω
Freq (MHz)
| S11 |
∠ S11
| S21 |
∠ S21
| S12 |
∠ S12
| S22 |
∠ S22
200
0.641
–52.7
16.527
137.8
0.031
67.4
0.820
–22.9
400
0.468
–85.4
11.299
115.7
0.048
60.5
0.643
–30.2
600
0.377
–106.6
8.303
103.1
0.060
60.0
0.549
–32.2
800
0.321
–124.1
6.502
94.0
0.072
60.9
0.499
–33.2
1000
0.293
–136.1
5.342
87.4
0.084
61.9
0.477
–33.9
1200
0.280
–146.7
4.546
81.4
0.097
62.7
0.462
–35.0
1400
0.266
–156.6
3.947
76.4
0.108
63.0
0.449
–36.2
1600
0.263
–163.2
3.527
71.4
0.123
63.7
0.444
–37.8
1800
0.263
–173.5
3.121
67.0
0.136
62.8
0.435
–39.9
2000
0.264
–179.8
2.864
62.8
0.150
62.4
0.434
–42.4
No.5187–4/5
2SC5277
VCE=2V, IC=3mA, ZO=50Ω
Freq (MHz)
| S11 |
∠ S11
| S21 |
∠ S21
| S12 |
∠ S12
| S22 |
∠ S22
200
0.851
–30.4
8.644
154.1
0.042
73.0
0.937
–16.4
400
0.724
–55.7
7.310
133.8
0.073
61.3
0.820
–27.9
600
0.612
–76.1
6.083
118.6
0.093
54.2
0.709
–35.7
800
0.521
–93.0
5.085
106.9
0.107
50.4
0.628
–40.4
1000
0.461
–106.1
4.343
98.1
0.118
48.3
0.572
–43.7
1200
0.423
–118.6
3.806
90.0
0.128
47.5
0.536
–45.8
1400
0.382
–129.4
3.349
83.3
0.137
46.9
0.506
–47.3
1600
0.366
–138.0
3.036
77.5
0.147
47.4
0.485
–49.5
1800
0.341
–148.8
2.685
71.7
0.157
47.2
0.463
–51.9
2000
0.333
–157.7
2.479
66.7
0.167
47.6
0.453
–54.1
VCE=1V, IC=1mA, ZO=50Ω
Freq (MHz)
| S11 |
∠ S11
| S21 |
∠ S21
| S12 |
∠ S12
| S22 |
∠ S22
200
0.945
–18.7
3.431
162.9
0.053
78.1
0.982
–10.3
400
0.892
–36.9
3.263
147.1
0.099
66.9
0.939
–19.7
600
0.826
–52.9
3.004
133.2
0.136
57.5
0.879
–27.7
800
0.754
–67.9
2.765
120.4
0.164
49.7
0.815
–34.8
1000
0.691
–81.1
2.539
109.9
0.184
43.4
0.758
–40.0
1200
0.639
–94.3
2.366
99.8
0.199
38.4
0.727
–44.3
1400
0.589
–104.9
2.143
91.2
0.207
34.1
0.683
–47.8
1600
0.558
–114.1
1.969
83.6
0.213
31.7
0.653
–51.4
1800
0.522
–124.4
1.797
76.2
0.218
28.7
0.621
–54.9
2000
0.490
–134.9
1.701
69.7
0.219
27.0
0.601
–58.1
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be expor ted without obtaining the expor t license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of February, 1999. Specifications and information herein are subject
to change without notice.
PS No.5187–5/5