2STL1360 2STX1360 Low voltage fast-switching NPN power transistors Features ■ Very low collector-emitter saturation voltage ■ High current gain characteristic ■ Fast-switching speed Applications ■ Emergency lighting ■ LED ■ Voltage regulation ■ Relay drive TO-92 Figure 1. Description TO-92L Internal schematic diagram The devices are NPN transistors manufactured using new “PB-HCD” (power bipolar high current density) technology. The resulting transistor shows exceptional high gain performances coupled with very low saturation voltage. Table 1. Device summary Order codes Marking Packages Packaging 2STL1360 L1360 TO-92L Bag 2STX1360 X1360 TO-92 Bag October 2009 Doc ID 11763 Rev 3 1/10 www.st.com 10 Electrical ratings 1 2STL1360, 2STX1360 Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter Unit 2STX1360 2STL1360 VCBO Collector-base voltage (IE = 0) 80 V VCEO Collector-emitter voltage (IB = 0) 60 V VEBO Emitter-base voltage (IC = 0) 6 V Collector current 3 A Collector peak current (tP < 5 ms) 5 A Base current 0.2 A Base peak current (tP < 5 ms) 0.4 A IC ICM IB IBM PTOT Total dissipation at Tamb = 25 °C TSTG Storage temperature TJ Table 3. 1 1.2 W -65 to 150 °C 150 °C Max. operating junction temperature Thermal data Value Symbol RthJA 2/10 Parameter Thermal resistance junction-ambient Doc ID 11763 Rev 3 Unit __max TO-92 TO-92L 125 104 °C/W 2STL1360, 2STX1360 2 Electrical characteristics Electrical characteristics Tcase = 25 °C unless otherwise specified. Table 4. Symbol Electrical characteristics Parameter Test conditions Min. Typ. Max. Unit ICBO Collector cut-off current (IE = 0) VCB = 80 V 100 nA IEBO Emitter cut-off current (IC = 0) VEB = 6 V 100 nA Base-emitter on voltage VCE = 2 V IC = 100 mA 650 730 mV VCE(sat) (1) Collector-emitter saturation voltage IC = 2 A IC = 3 A IB = 100 mA IB = 150 mA 130 180 300 500 mV mV VBE(sat) (1) Base-emitter saturation voltage IC = 2 A IB = 100 mA 0.9 1.2 V DC current gain IC = 0.1 A IC = 1 A VCE = 2 V VCE = 2 V td tr ts tf RESISTIVE LOAD Delay time Rise time Storage time Fall time IC = 3 A VCC = 10 V IB(on) = - IB(off) = 300 mA VBE(off) = - 5 V 17 81 620 54 fT Transition frequency IC = 0.1 A 130 VBE(on) hFE (1) VCE = 10 V 630 80 160 400 20 100 720 65 ns ns ns ns MHz 1. Pulse test: pulse duration ≤ 300 µs, duty cycle ≤ 2 % 2.1 Electrical characteristics (curves) Figure 2. DC current gain (VCE = 5 V) Figure 3. Doc ID 11763 Rev 3 DC current gain (VCE = 2 V) 3/10 Electrical characteristics 2STL1360, 2STX1360 Figure 4. Collector-emitter saturation voltage Figure 5. Figure 6. Resistive load switching time Figure 7. Figure 8. Capacitance C1000 (pF) CEB f = 1 MHz 100 CCB 10 0.1 4/10 1 10 V R100 (V) Doc ID 11763 Rev 3 Base-emitter saturation voltage Resistive load switching time 2STL1360, 2STX1360 2.2 Electrical characteristics Test circuit Figure 9. Resistive load switching test circuit 1. Fast electronic switch 2. Non-inductive resistor Doc ID 11763 Rev 3 5/10 Package mechanical data 3 2STL1360, 2STX1360 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 6/10 Doc ID 11763 Rev 3 2STL1360, 2STX1360 Package mechanical data TO-92 bulk shipment mechanical data mm. DIM. MIN. TYP MAX. A 4.32 4.95 b 0.36 0.51 D 4.45 4.95 E 3.30 3.94 e 2.41 2.67 e1 1.14 1.40 L 12.70 15.49 R 2.16 2.41 S1 0.92 1.52 W 0.41 0.56 5o V 0102782 D Doc ID 11763 Rev 3 7/10 Package mechanical data 2STL1360, 2STX1360 TO-92L MECHANICAL DATA DIM. mm. MIN. TYP MAX. A 7.80 8.20 b 0.35 0.45 D 4.70 5.10 D1 4 E 3.70 4.10 e 2.44 2.64 e1 1.27 L 13.30 14.30 S1 1.28 1.58 W 0.35 0.55 7854933 A 8/10 Doc ID 11763 Rev 3 2STL1360, 2STX1360 4 Revision history Revision history Table 5. Document revision history Date Revision Changes 20-Oct-2006 1 Initial release 16-Jul-2007 2 Added figures 2, 3, 4, 5, 6, 7 and 8 29-Oct-2009 3 Updated Figure 8 on page 4 and TO-92 package mechanical data Doc ID 11763 Rev 3 9/10 2STL1360, 2STX1360 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10 Doc ID 11763 Rev 3