ST13003-K High voltage fast-switching NPN power transistor Features ■ High voltage capability ■ Low spread of dynamic parameters ■ Very high switching speed Applications ■ Electronic ballast for fluorescent lighting (CFL) ■ SMPS for battery charger 3 2 1 SOT-32 Description The device is manufactured using high voltage multi-epitaxial planar technology for high switching speeds and high voltage capability. Figure 1. Internal schematic diagram It uses a cellular emitter structure with planar edge termination to enhance switching speeds while maintaining the wide RBSOA. Table 1. Device summary Part number Marking Package Packaging ST13003-K 13003 SOT-32 Bag June 2011 Doc ID 13533 Rev 4 1/10 www.st.com 10 Electrical ratings 1 Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VCES Collector-emitter voltage (VBE = 0) 700 V VCEO Collector-emitter voltage (IB = 0) 400 V VEBO Emitter-base voltage (IC = 0, IB = 0.75 A, tP < 10 µs) V(BR)EBO V 1.5 A 3 A Base current 0.75 A IBM Base peak current (tP < 5 ms) 1.5 A PTOT Total dissipation at TC = 25 °C 40 W TSTG Storage temperature -55 to 150 °C Operating junction temperature -40 to 150 °C Value Unit 3.1 °C/W IC ICM IB TJ Table 3. Symbol RthJC 2/10 ST13003-K Collector current Collector peak current (tP < 5 ms) Thermal data Parameter Thermal resistance junction-case max. Doc ID 13533 Rev 4 ST13003-K 2 Electrical characteristics Electrical characteristics Tcase = 25 °C unless otherwise specified. Table 4. Symbol Electrical characteristics Parameter Test conditions ICES Collector cut-off current (VBE = 0) VCE = 700 V VCE = 700 V V(BR)EBO Emitter-Base breakdown voltage (IC = 0) IE = 10 mA VCEO(sus) (1) Min. Typ. TC = 125 °C 9 Collector-emitter I = 10 mA sustaining voltage (IB = 0) C Max. Unit 1 5 mA mA 18 V 400 V VCE(sat) (1) Collector-emitter saturation voltage _ IB = 0.1 A IC = 0.5 A IC = 1 A _ _ IB = 0.25 A IC = 1.5 A _ _ IB = 0.5 A 0.5 1 1.5 V V V VBE(sat) (1) Base-emitter saturation voltage _ IB = 0.1 A IC = 0.5 A IC = 1 A _ _ IB = 0.25 A 1 1.2 V V DC current gain IC = 0.5 A IC = 1 A tr ts tf Resistive load Rise time Storage time Fall time VCC = 125 V IB1 = 0.2 A Tp = 25 µs ts Inductive load Storage time IC = 1 A IB1 = 0.2 A L = 50 mH VBE = - 5 V VClamp = 300 V hFE VCE = 2 V VCE = 2 V 8 5 20 25 IC = 1 A IB2 = - 0.2 A 1 4 0.7 0.8 µs µs µs µs 1. Pulsed duration = 300 µs, duty cycle ≤ 1.5% Doc ID 13533 Rev 4 3/10 Electrical characteristics 2.1 4/10 ST13003-K Electrical characteristics (curves) Figure 2. Safe operating areas Figure 3. Derating curve Figure 4. Output characteristics Figure 5. Reverse biased safe operating areas Figure 6. DC current gain (VCE = 1 V) Figure 7. DC current gain (VCE = 5 V) Doc ID 13533 Rev 4 ST13003-K Electrical characteristics Figure 8. Collector-emitter saturation voltage Figure 9. Base-emitter saturation voltage Figure 10. Inductive load switching time Figure 11. Resistive load switching time 2.2 Test circuits Figure 12. Resistive load switching test circuit 1. Fast electronic switch 2. Non-inductive resistor Doc ID 13533 Rev 4 5/10 Electrical characteristics ST13003-K Figure 13. Inductive load switching test circuit 1. Fast electronic switch 2. Non-inductive resistor 3. Fast recovery rectifier 6/10 Doc ID 13533 Rev 4 ST13003-K 3 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Doc ID 13533 Rev 4 7/10 Package mechanical data Table 5. ST13003-K SOT-32 (TO-126) mechanical data mm. Dim. Min. Typ. Max. A 2.4 2.9 B 0.64 0.88 B1 0.39 0.63 D 10.5 11.05 E 7.4 7.8 e 2.04 2.29 2.54 e1 4.07 4.58 5.08 L 15.3 16 P 2.9 3.2 Q Q1 3.8 1 1.52 H2 2.15 I 1.27 Figure 14. SOT-32 (TO-126) drawings 0016114E 8/10 Doc ID 13533 Rev 4 ST13003-K 4 Revision history Revision history Table 6. Document revision history Date Revision Changes 23-May-2007 1 Initial release. 09-Jul-2008 2 Added Table 1 on page 1. 15-Dec-2009 3 Added Table 3: Thermal data on page 2. 15-Jun-2011 4 Modified: Table 2 Doc ID 13533 Rev 4 9/10 ST13003-K Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10 Doc ID 13533 Rev 4