UTC-IC TIP127L-T60-K

UNISONIC TECHNOLOGIES CO., LTD
TIP127
PNP SILICON TRANSISTOR
PNP EPITAXIAL TRANSISTOR
„
DESCRIPTION
The UTC TIP127 is a PNP epitaxial transistor, designed for
use in general purpose amplifier low-speed switching applications.
„
EQUIVALENT TEST (R1 ≈8kΩ, R2 ≈0.12kΩ)
C
B
R1
R2
E
„
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
TIP127L-T60-K
TIP127G-T60-K
TIP127L-TA3-T
TIP127G-TA3-T
www.unisonic.com.tw
Copyright © 2009 Unisonic Technologies Co., Ltd
Package
TO-126
TO-220
Pin Assignment
1
2
3
E
C
B
B
C
E
Packing
Bulk
Tube
1 of 4
QW-R203-005,D
TIP127
„
PNP SILICON TRANSISTOR
ABSOLUTE MAXIMUM RATING (Ta = 25°C, unless otherwise specified)
PARAMETER
Collector to Base Voltage
Collector to Emitter Voltage
Emitter to Base Voltage
Collector Current
RATINGS
UNIT
100
V
100
V
5
V
5
A
TO-126
40
W
Power Dissipation
PD
TO-220
65
W
Junction Temperature
TJ
150
°C
Operating Temperature
TOPR
-20 ~ +85
°C
Storage Temperature
TSTG
-55 ~ +150
°C
Note: Absolute maximum ratings are the values beyond which the device will be damaged permanently.
Absolute maximum ratings are only stress ratings and it is not implied for functional device operation.
„
SYMBOL
VCBO
VCEO
VEBO
IC
ELECTRICAL CHARACTERISTICS
PARAMETER
Collector-Emitter Breakdown Voltage
Collector Cut-Off Current
Collector-Cut-Off Current
Emitter Cut-Off Current
Collector-Emitter Saturation Voltage
Collector-Emitter Saturation Voltage
Base-Emitter Saturation Voltage
DC Current Gain
(Ta =25°C, unless otherwise specified)
SYMBOL
BVCEO
ICBO
ICEO
IEBO
VCE(SAT)1
VCE(SAT)2
VBE(ON)
hFE
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
TEST CONDITIONS
IC=100mA
VCB=100V
VCE=50V
VEB=5V
IC=3A, IB=12mA
IC=5A, IB=20mA
VCE=3V, IC=3A
IC=500mA, VCE=3V
IC=3A, VCE=3V
MIN TYP MAX UNIT
100
V
200 uA
500 uA
2
mA
2
V
4
V
2.5
V
1
K
2 of 4
QW-R203-005,D
TIP127
„
PNP SILICON TRANSISTOR
TYPICAL CHARACTERISTICS
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 4
QW-R203-005,D
TIP127
„
PNP SILICON TRANSISTOR
TYPICAL CHARACTERISTICS(Cont.)
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 4
QW-R203-005,D