UNISONIC TECHNOLOGIES CO., LTD UTC4013 Preliminary CMOS IC DAUL D-TYPE FLIP-FLOP DESCRIPTION The UTC4013 is a dual D-type flip-flop which has two independent circuits and each flip-flop features independent data, set, reset, and clock inputs and outputs. The input level applied to DATA input are transferred to Q and Q output by rising edge of the clock pulse. When SET input is “H”, and RESET input is “L”, outputs become Q=”H” and Q =”L”. When SET input is “L” and RESET input is “H”, outputs become Q=”L” and Q =”H”. When both SET input and RESET input are at “H”, outputs become Q=”H” and Q =”H”. FEATURES * Power supply voltage 3V to 18V * Maximum Input Current of 1uA at 18V Over Full Package Temperature * Maximum quiescent supply current is 4μA ORDERING INFORMATION Ordering Number Lead Free Halogen Free UTC4013L-S14-R UTC4013G-S14-R UTC4013L-P14-R UTC4013G-P14-R www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., Ltd Package Packing SOP-14 TSSOP-14 Tape Reel Tape Reel 1 of 5 QW-R502-543.c UTC4013 CMOS IC PIN CONFIGURATION Preliminary Q1 1 14 VDD Q1 2 13 Q2 CK1 3 12 Q2 RESET1 4 11 CK2 DATA1 5 10 RESET2 SET1 6 9 DATA2 VSS 7 8 SET2 FUNCTION TABLE RESET L H H Note: INPUTS SET DATA H L H - OUTPUTS CK* - Qn+1 H L H Q n+1 L H H L L L L H L L H H L L L - No Change No Change - : Don’t care * : Level Change LOGIC DIAGRAM BLOCK DIAGRAM UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-543.c UTC4013 Preliminary CMOS IC ABSOLUTE MAXIMUM RATING (TA =25°C , unless otherwise specified) PARAMETER SYMBOL RATINGS DC Supply Voltage VDD VSS-0.5 to VSS+20 Input Voltage VIN VSS-0.5 to VDD+0.5 Output Voltage VOUT VSS-0.5 to VDD+0.5 DC Input Current IIN ±10 Power Dissipation PD 500 Operation Temperature TOPR -40 ~ +85 Storage Temperature TSTG -65 ~ +150 Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING CONDITIONS (VSS=0,TA=25℃) PARAMETER DC Supply Voltage Input Voltage UNIT V V V mA mW ℃ ℃ SYMBOL VDD VIN RATINGS 3 ~ 18 0 ~ VDD UNIT V V D.C. CHARACTERISTICS (VSS=0, TA=25℃) PARAMETER SYMBOL High VIH Input Voltage Low VIL High VOH Output Voltage Input Current Low VOL High Low IIH IIL High IOH Output Current Low Quiescent Supply Current IOL IDD TEST CONDITIONS VOUT=0.5V, 4.5V;VDD=5V,∣IOUT∣<1μA VOUT=1.0V, 9.0V; VDD=10V, ∣IOUT∣<1μA VOUT=1.5V, 13.5V; VDD=15V, ∣IOUT∣<1μA VOUT=0.5V, 4.5V; VDD=5V,∣IOUT∣<1μA VOUT=1.0V, 9.0V; VDD=10V, ∣IOUT∣<1μA VOUT=1.5V, 13.5V; VDD=15V, ∣IOUT∣<1μA VIN=VSS, VDD; ∣IOUT∣<1μA; VDD=5V VIN=VSS, VDD; ∣IOUT∣<1μA; VDD=10V VIN=VSS, VDD; ∣IOUT∣<1μA; VDD=15V VIN=VSS, VDD; ∣IOUT∣<1μA; VDD=5V VIN=VSS, VDD; ∣IOUT∣<1μA; VDD=10V VIN=VSS, VDD; ∣IOUT∣<1μA; VDD=15V VIH=18V, VDD=18V VIL=0V, VDD=18V VOH=4.6, VIN=VSS, VDD; VDD=5V VOH=2.5, VIN=VSS, VDD; VDD=5V VOH=9.5, VIN=VSS, VDD; VDD=10V VOH=13.5, VIN=VSS, VDD; VDD=15V VOL=0.4, VIN=VSS, VDD; VDD=5V VOL=0.5, VIN=VSS, VDD; VDD=10V VOL=1.5, VIN=VSS, VDD; VDD=15V VIN=VSS, VDD(Note); VDD=5V VIN=VSS, VDD(Note); VDD=10V VIN=VSS, VDD(Note); VDD=15V MIN 3.5 7.0 11.0 4.95 9.95 14.95 -0.51 -2.10 -1.30 -3.40 0.51 1.30 3.40 TYP 2.75 5.5 8.25 2.25 4.50 6.75 5.00 10.00 15.00 0.00 0.00 0.00 10-5 -10-5 -1.0 -4.0 -2.2 -9.0 1.2 3.2 12.0 0.002 0.004 0.008 MAX 1.5 3.0 4.0 0.05 0.05 0.05 0.1 -0.1 UNIT V V uA mA 1 2 4 uA Note: All valid input combinations. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 5 QW-R502-543.c UTC4013 Preliminary CMOS IC A.C. CHARACTERISTICS (VSS=0, TA=25℃, CL=50pF) PARAMETER SYMBOL Low to High tTLH High to Low tTHL Output Transition Time Propagation Delay Time tpLH (CK – Q, Q ) tpHL tpLH Propagation Delay Time (SET, RESET – Q, Q ) tpHL Max. Clock Frequency fCL Max. Clock Input Rise Time trCL Max. Clock Input Fall Time tfCL Min. Pulse Width (SET, RESET) tW Min. Clock Pulse Width tW Min. Set-up Time (DATA - CK) tsu Min. Hold Time (DATA-CK) tH Min. Removal Time (SET, RESET-CK) Input Capacitance trem CIN UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TEST CONDITIONS VDD=5V VDD=10V VDD=15V VDD=5V VDD=10V VDD=15V VDD=5V VDD=10V VDD=15V VDD=5V VDD=10V VDD=15V VDD=5V VDD=10V VDD=15V VDD=5V VDD=10V VDD=15V VDD=5V VDD=10V VDD=15V VDD=5V VDD=10V VDD=15V VDD=5V VDD=10V VDD=15V VDD=5V VDD=10V VDD=15V VDD=5V VDD=10V VDD=15V VDD=5V VDD=10V VDD=15V VDD=5V VDD=10V VDD=15V MIN 3.5 8.0 12.0 TYP 70 35 30 70 35 30 130 65 50 110 50 40 110 50 40 8.0 16.0 20.0 MAX 200 100 80 200 100 80 300 130 90 300 130 90 300 130 90 UNIT ns MHz No Limit μs No Limit μs 60 30 25 60 30 25 20 10 6 5 180 80 50 140 60 40 40 20 15 40 20 15 40 20 15 7.5 ns ns pF 4 of 5 QW-R502-543.c UTC4013 Preliminary CMOS IC PARAMETER MEASUREMENT INFORMATION 2. SET-RESET, Q 20ns 20ns SET 10% 90% 50% 90% 50% tW RESET 10% 20ns 20ns 10% 90% 50% 90% 50% 10% tW 50% Q tPLH 50% tPHL UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-543.c