UNISONIC TECHNOLOGIES CO., LTD UTD405 Power MOSFET P-CHANNEL ENHANCEMENT MODE DESCRIPTION The UTD405 can provide excellent RDS(ON), low gate charge and low gate resistance by using advanced trench technology. This device is well suited for high current load applications with the excellent thermal resistance. FEATURES * RDS(ON) = 32mΩ @VGS = -10 V * Low capacitance * Low gate charge * Fast switching capability * Avalanche energy specified *Pb-free plating product number: UTD405L SYMBOL 2.Drain 1.Gate 3.Source ORDERING INFORMATION Ordering Number Normal Lead Free Plating UTD405-TN3-R UTD405L-TN3-R UTD405-TN3-T UTD405L-TN3-T www.unisonic.com.tw Copyright © 2008 Unisonic Technologies Co., Ltd Package TO-252 TO-252 Pin Assignment 1 2 3 G D S G D S Packing Tape Reel Tube 1 of 5 QW-R502-199.A UTD405 Power MOSFET ABSOLUTE MAXIMUM RATINGS (TA=25°C unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Drain-Source Voltage VDSS -30 V Gate-Source Voltage VGSS ±20 V Continuous Drain Current ID -18 A Pulsed Drain Current IDM -40 A Avalanche Current IAR -18 A Repetitive Avalanche Energy(L=0.1mH) EAR 40 mJ Power Dissipation PD 2.5 W ℃ Junction Temperature TJ +150 ℃ Storage Temperature TSTG -55 ~ +150 Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER SYMBOL θJA Junction-to-Ambient MIN TYP 40 MAX 50 UNIT ℃/W ELECTRICAL CHARACTERISTICS (TJ =25°C, unless otherwise noted) PARAMETER OFF CHARACTERISTICS Drain-Source Breakdown Voltage Drain-Source Leakage Current Gate-Body Leakage Current ON CHARACTERISTICS Gate-Threshold Voltage On state drain current Static Drain-Source On-Resistance SYMBOL TEST CONDITIONS BVDSS IDSS IGSS VGS =0 V, ID =-250 µA VDS =-24 V, VGS =0 V VDS =0 V, VGS = ±20V -30 VGS(TH) ID(ON) VDS =VGS, ID =-250 µA VGS=-10V, VDS=-5V VGS =-10 V, ID =-18A VGS =-4.5 V, ID =-10A -1.2 -40 RDS(ON) DYNAMIC PARAMETERS Input Capacitance CISS VDS =-15 V, VGS =0V, f=1MHz Output Capacitance COSS Reverse Transfer Capacitance CRSS SWITCHING PARAMETERS Total Gate Charge QG VDS =-15V, VGS =-10V, ID =-18 A Gate-Source Charge QGS Gate-Drain Charge QGD Turn-ON Delay Time tD(ON) VGS=-10V,VDS=-15V, RL=0.82Ω, Turn-ON Rise Time tR RGEN=3Ω Turn-OFF Delay Time tD(OFF) Turn-OFF Fall-Time tF SOURCE- DRAIN DIODE RATINGS AND CHARACTERISTICS Drain-Source Diode Forward Voltage VSD IS=-1A,VGS=0V Maximum Continuous Drain-Source IS Diode Forward Current Body Diode Reverse Recovery Time tRR IF=-18A, dI/dt=100A/μs Body Diode Reverse Recovery QRR IF=-18A, dI/dt=100A/μs Charge Notes: 1. Pulse width limited by TJ(MAX) 2. Pulse width ≤300us, duty cycle 0.5% max. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT -0.003 -1 ±100 V µA nA -2 -2.4 24.5 41 32 60 920 190 122 1100 pF pF pF 18.7 2.54 5.4 9 25 20 12 23 13 35 30 18 nC nC nC ns ns ns ns -0.76 -1 V -18 A 21.4 26 ns 13 16 nC V A mΩ mΩ 2 of 5 QW-R502-199.A UTD405 Power MOSFET TYPICAL CHARACTERISTICS Body-Diode Characteristics On-Resistance vs.Gate-to-Source Voltage 100 1.0E+0.1 90 1.0E+0.0 ID=-18A 80 1.0E-0.1 125℃ 60 50 -IS (A) RDS(ON) (mΩ) 70 125℃ 40 30 25℃ 1.0E-0.2 1.0E-0.3 1.0E-0.4 25℃ 20 1.0E-0.5 10 3 4 5 6 7 -VGS (Volts) 8 9 10 1.0E-0.6 0.0 0.2 0.4 0.6 -VSD (Volts) 0.8 1.0 Capacitance (pF) -VGS (Volts) 0 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 5 QW-R502-199.A UTD405 Power MOSFET TYPICAL CHARACTERISTICS(Cont.) Maximum Forward Biased Safe Operating Area 10.0 TJ(MAX)=150℃ TA=25℃ TJ(MAX)=150℃ TA=25℃ 10μs RDS(ON) Limited 1ms 30 100μs Power (W) 1000.0 -ID (Amps) 10ms 0.1s 1.0 20 1s 10s 0.1 0.1 Single Pulse Power Rating Junction-to-Ambient 40 10 DC 1 10 100 0.01 0.1 1 10 Pulse Width (s) 100 1000 ZθJA.Normailized Transient Thermal Resistance -VDS (Volts) 0 0.001 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 5 QW-R502-199.A UTD405 Power MOSFET UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-199.A