Film Capacitors – Power Factor Correction Key Components – Capacitor Contactors Series/Type: Ordering code: B44066S B44066S….J230/J110/N230 Date: Version: August 2009 8 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the color to "white". This ensures that the table disappears (invisible) for the customer PDF. Don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it! Identification/Classification 1 (header 1 + top left bar): Film Capacitors – Power Factor Correction Identification/Classification 2 (header 2 + bottom left header bar): Key Components – Capacitor Contactors Ordering code: (top right header bar) B44066S….J230/J110/N230 Series/Type: (top right header bar) B44066S Preliminary data (optional): (if necessary) Preliminary data Department: FK PC PM PFC Date: August 2009 Version: 8 EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited Film Capacitors – Power Factor Correction Key Components – Capacitor Contactors B44066S….J230/J110/N230 B44066S Preliminary data Series B44066S.…J230 with precharging resistors Characteristics Excellent damping of inrush current Improved power quality (e.g. avoidance of voltage sags) Longer useful life of main contacts of capacitor contactor Soft switching of capacitor and thus longer useful life Enhanced mean life expectancy Reduced ohmic losses Easy access for cable connection AC6b utilization category for switching 3-phase capacitors B44066S….J230/J110 Features Resistors Leading contacts Tamper-proof and protected With wiper function Pre-contacts Snap function Aux-contacts For all types In applications with or without reactors Usage B44066S9910J230 Series B44066S.…N230 for de-tuned PFC-systems with reactors only Characteristics Cost efficient Optimized for capacitor switching Long useful life of main contacts of capacitor contactor Easy access for cable connection of capacitors Features Aux-contacts Usage For all types In applications with reactors only B44066S….N230/N110 FK PC PM PFC Please read Cautions and warnings and Important notes at the end of this document. August 2009 Page 2 of 7 Film Capacitors – Power Factor Correction Key Components – Capacitor Contactors B44066S….J230/J110/N230 B44066S Preliminary data Technical Data To IEC 947-4-1, IEC 947-5-1, EN 60947-4-1, EN 60947-5-1, VDE 0660 Type/ Main contacts Capacitor power at 50 °C 380 ... 400 V 415 ... 440 V 660 ... 690 V Capacitor power at 60 °C 380 - 400 V 415 - 440 V 660 - 690 V Coil operating voltage at 50 Hz: Type ... 230 Type …110 Coil operating voltage at 60 Hz: Type ... 230 Type ... 110 Rated op. current AC6b at 50/60 Hz 50 °C 60 °C Power loss contactor at max. rated capacitor current Rated insulation voltage Max. frequency of operations: Contact life: w/o reactors with reactors Cable cross section Solid or stranded Flexible Flexible with multicore cable end Cables / clamp 2 cables per pole for cable cross section: Solid or stranded Flexible Weight including auxiliary contact: Type …N… Type …J… Fuses gL (gG) From / to …1810… …2410… …3210… …5010… …6210… kvar 0 ... 12.5 0 ... 13 0 ... 20 10 ... 20 10.5 ... 22 17 ... 33 10 ... 25 10.5 ... 27 17 ... 41 20 ... 33.3 23 ... 36 36 ... 55 20 ... 50 23 ... 53 36 ... 82 20 ... 75 23 ... 75 36 ... 120 33 ... 100 36 ... 103 57 ... 148 kvar 0 ... 12.5 0 ... 13 0 ... 20 10 … 20 10.5 ... 22 17 ... 33 10 ... 25 10.5 ... 27 17 ... 41 20 ... 33.3 23 ... 36 36 ... 55 20 ... 50 23 ... 53 36 ... 82 20 ... 60 23 ... 64 36 ... 100 33 ... 90 36 ... 93 57 ... 148 187 - 264 85 - 121 187 - 264 85 - 121 187 - 264 85 - 121 187 - 264 not available 187 - 264 85 - 121 187 - 264 85 - 121 187 - 264 not available 196 - 290 94 - 134 196 - 290 94 - 134 196 - 290 94 - 134 196 - 290 not available 196 - 290 94 - 134 196 - 290 94 - 134 187 - 264 not available 0 - 18 0 - 18 14 - 28 14 - 28 14 - 36 14 - 36 30 - 48 30 - 48 30 - 72 30 - 72 30 - 108 30 - 87 50 - 144 50 - 130 W 4.1 5.7 7.5 12.6 21 38.7 36 V AC 6901) 6901) 6901) 6901) 6901) 6901) 10001) 1/h 120 120 120 120 120 80 80 Million operations 0.25 0.40 0.15 0.30 0.15 0.30 0.15 0.30 0.15 0.30 0.12 0.20 0.12 0.20 1.5 ... 6 2.5 ... 25 2.5 ... 25 4 ... 50 4 ... 50 4 ... 50 1.5 ... 4 2.5 ... 16 2.5 ... 16 10 ... 35 10 ... 35 10 ... 35 1.5 ... 4 2.5 ... 16 2.5 ... 16 10 ... 35 10 ... 35 10 ... 35 0.5 ... 95 / 10 ... 120 0.5 ... 70 / 10 ... 95 0.5 ... 70 / 10 ... 95 2 1 1 1 1 1 2 mm2 (max.) 6/6 10/10 10/10 16/16 16/16 16/16 95/120 4/4 10/10 10/10 25/25 25/25 25/25 70/95 kg 0.26 0.37 0.51 0.67 0.51 0.67 0.88 1.03 0.88 1.03 0.88 1.03 2.23 2.33 A 35 / 63 50 / 80 63 / 100 80 / 160 125 / 160 160 / 200 160 / 250 V AC V AC A mm2 1) …7410… …9910… Suitable at 690 V for: earthed-neutral systems, overvoltage category I to IV, pollution degree 3 (standard-industry): Vimp = 8 kV. Data for other conditions on request. FK PC PM PFC Please read Cautions and warnings and Important notes at the end of this document. August 2009 Page 3 of 7 Film Capacitors – Power Factor Correction Key Components – Capacitor Contactors B44066S….J230/J110/N230 B44066S Preliminary data Type/ Auxiliary contacts Normal Open (NO) Rated insulation voltage Rated operational current AC15 at 230 V / 400 V Rated operational current AC1 at 690 V 1) …1810… …2410… …3210… …5010… …6210… …7410… …9910… 1 1 1 1 1 1 1 V AC 6901) 6901) 6901) 6901) 6901) 6901) 6901) A 3/2 3/2 3/2 3/2 3/2 3/2 3/2 A 10 10 10 10 10 10 10 Suitable at 690 V for: earthed-neutral systems, overvoltage category I to IV, pollution degree 3 (standard-industry): Vimp = 8 kV. Data for other conditions on request. Connection diagram for all types B44066S…J… Connection diagram for all types B44066S…N… (with preload resistors). (B44066S1810J230 and B44066S1810J110 with wires on the bottom only, B44066S9910J230 with resistors inside housing). (without preload resistors). Dimensional drawings B44066S1810J230, B44066S1810J110 45 B44066S1810N230 98 35-36 94 59 85 49-50 ø5 M3.5 6.5 50 KLK1719-4 B44066S2410J230, B44066S3210J230 B44066S2410N230, B44066S3210N230 FK PC PM PFC Please read Cautions and warnings and Important notes at the end of this document. August 2009 Page 4 of 7 Film Capacitors – Power Factor Correction Key Components – Capacitor Contactors B44066S….J230/J110/N230 B44066S Preliminary data B44066S2410J110, B44066S3210J110 B44066S5010J230, B44066S6210J230, B44066S6210J110, B44066S7410J230, B44066S7410J110 B44066S5010N230, B44066S6210N230 B44066S7410N230 B44066S9910J230 B44066S9910N230 FK PC PM PFC Please read Cautions and warnings and Important notes at the end of this document. August 2009 Page 5 of 7 Film Capacitors – Power Factor Correction Key Components – Capacitor Contactors B44066S….J230/J110/N230 B44066S Preliminary data Cautions and warnings In case auxiliary contacts are used for switching of discharge resistors (not in accordance with IEC 60831 standard), make sure that the current of the discharge resistors is not higher than the rated current of the auxiliary contacts. Mounting instructions In the area of capacitor switching contactors, difficultly inflammable and self-extinguishing materials may be used only, because abnormal temperatures within the area of the resistance spirals cannot be excluded. Note For detailed information about PFC key components and cautions, refer to the latest version of EPCOS PFC Product Profile. Important: Please note that the „General Safety Recommendations for Power Capacitors“ by ZVEI (German Electrical and Electronic Manufacturers´ Association (ZVEI) have to be observed in addition to the caution guidelines stated in the data sheet (Internet: www.epcos.com/pfc). FK PC PM PFC Please read Cautions and warnings and Important notes at the end of this document. August 2009 Page 6 of 7 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, AgriCap, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue, MiniCell, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Page 7 of 7