FTR-K3 SERIES POWER RELAY 1 POLE - 20A Heavy Load RoHS compliant FTR-K3 Series n FEATURES SPST 20A and #250 tab terminal type is also available l Low coil power (780mW) l Cadmium free contacts l SAFETY STANDARDS UL, CSA, VDE,CQC approved l RoHS Compliant since production l n ORDERING INFORMATION [Example] FTR-K3 J B 012 W – ( ) (a) (b) (c) (d) (e) (f ) (a) Series Name FTR-K3: FTR-K3 Series (b) Contact Arrangement A J : 1 form A (SPST-NO) (PCB terminal) : 1 form A (SPST-NO) (Tab terminal) (c) Coil Type / Enclosure B : Standard (780 mW) (d) Nominal Voltage 005 018 : 5 VDC, : 18 VDC (e) Contact Material / TV type W : Silver alloy (f) Special Designation : 006 : 6VDC, 024: 24VDC, 009 : 9VDC 048 : 48VDC 012 : 12VDC Actual marking does not carry the type name : "FTR" E.g.: Ordering code: FTR-K3AB012W Actual marking: K3AB012W FTR-K3 SERIES n PART NUMBERS 400mW type Ordering Part Number Series Contact Coil Power Coil Voltage FTR-K3AB005W 5 FTR-K3AB006W 6 FTR-K3AB009W 9 A: 1 form A PCB terminal FTR-K3AB012W FTR-K3AB018W 12 18 FTR-K3AB024W FTR-K3AB048W FTR-K3JB005W Contact Material 24 FTR-K3 B: 780 mW FTR-K3JB006W 48 5 W: Silver alloy 6 FTR-K3JB009W 9 J: 1 form A Tab terminal FTR-K3JB012W FTR-K3JB018W 12 18 FTR-K3JB024W 24 FTR-K3JB048W 48 n COIL DATA CHART Coil Voltage Nominal Voltage (VDC) Coil Resistance (±10%) Must Operate Voltage*2 Must Release Voltage*2 005 5 32 Ω 3.5 VDC 0.5 VDC 006 6 46 Ω 4.2 VDC 0.6 VDC 009 9 105 Ω 6.3 VDC 0.9 VDC 012 12 185 Ω 8.4 VDC 1.2 VDC 018 18 415 Ω 12.6 VDC 1.8 VDC 024 24 740 Ω 16.8 VDC 2.4 VDC 048 48 2,955 Ω 33.6 VDC 4.8 VDC Nominal Power (mW) 780 Note: All values in the table are measured at 20°C. *1: No contact current at 20°C *2: Specified values are subject to pulse wave voltage FTR-K3 SERIES n SPECIFICATIONS Item FTR-K3 Contact Arrangement 1 form A Material Silver alloy Configuration Single Resistance (initial) Maximum 100 mΩ at 1 A, 6 VDC Rating 20 A, 250 VAC (resistive) Maximum Carrying Current*1 25A Maximum Switching Current 25A Maximum Switching Rating 6,250VA Maximum Switching Voltage 250 VAC Maximum Switching Load*2 100 mA 5VDC Nominal Power (at 20ºC) 780mW Operate Power (at 20ºC) 380 mW Operating Temperature -40ºC to +60ºC (no frost) Time Value Operate (without diode) Maximum 20ms (at nominal voltage, no bounce) Release (without diode) Maximum 10ms (at nominal voltage, no bounce) Life Mechanical 20 x 106 operations minimum Coil Resistive 100 x 103 operations min. Motor 200 x 103 operations min. Inverter 30 x 103 operations min. Vibration Resistance Misoperation 10 to 55 Hz, at double amplitude of 0.7 mm Endurance 10-55Hz, at double amplitude of 1.5 mm Shock Resistance Misoperation Electrical Other Weight Endurance Min. 100m/s2 (11±1ms) Min. 1,000m/s2 (6±1ms) Approximately 25g *1 Need to consider the head from PCB when max. current is more than 10A. *2 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. FTR-K3 SERIES n INSULATION Item FTR-K1 Note Resistance (initial) Minimum 1,000 MΩ 1 min. at 500 VDC Dielectric Strength open contacts 1,000 VAC (50/60 Hz) 1 min. coil and contacts 5,000 VAC (50/60 Hz) 1 min. Surge Voltage (coil and contact) 8,500 V 1.2 x 50µs standard wave n SAFETY STANDARDS Type Compliance Contact rating FTR-K3 UL UL 508 Flammability: UL 94-V0 (plastics) E63614 20A, 277 VAC (resistive) 1 HP, 125VAC 2 HP, 277VAC, 100,000 ops. CSA C22.2 No. 14 LR 40304 VDE 0435 CQC 04001009179 Complies with NEMKO, DEMKO, FIMKO ming Temperature Rise (deg.) e 0.8 wer (W) Coil Temperature Rise 100 1.0 1.2 80 20A 25A 60 40 20 0 0A 0 0.2 0.4 0.6 0.8 1.0 Coil Power (W) 1.2 Nominal voltage multiplying factor n CHARACTERISTIC DATA Operating Range 2.2 2.0 0A 1.8 1.6 1.4 25A 1.2 1.0 m 0.8 oltage erate v p must o 0.6 0 20 ) ot coil age (h te volt era ust op 40 oil) (cool c 60 80 100 Ambient temperature (ºC) FTR-K3 SERIES AC resistive 10 5 2 1 0.5 0.2 10 20 50 100 10 5 3 FTR-K3JB012W n=200 Operate Release 90 80 70 AC250 V COSØ=0.4 2 1 500 1000 Distribution of Operation & Release Voltage 100 0 5 50 40 30 100 25 80 60 50 40 30 80 70 60 50 40 30 20 20 10 10 10 0 0 0 10 20 30 40 60 50 70 80 90 100 0 1 2 3 8 6 Operate _ _ ○ _ ○ ○ _ _ 4 _ × _ _ Release _ × _ ○ _ _ _ × _ × _ × × _ × _ _ _× _ Initial 20 × × _ _ 60 00 Operate 4 2 200 7 8 Operate _ ○ _ ○ ○ _ _ _ _ × Release _ × _ _ _ × _ _ _ 20 × × _ _ × _ FTR-K3JB012W n㧩10 Initial _ 0.33Hz㧔Duty 50%㧕 AC250V, 20A (resistive) 5 Operation (x104) 0 5 10 10 15 20 25 30 35 40 45 Contact Resistance (mΩ) Operate 8 6 0 50 2 1 0.5 Initial ○ ○ ○ _ _ _ _ Release × _ _ × _ FTR-K3JB012W n㧩10 _ _ × _ _ × 20 10 5 _ _ _ 4 2 50 Electrical Test 10 _ 0 50 10 5 0 9 10 11 12 × _ × _ _ _ 0.33Hz㧔Duty 50%㧕 AC250V, 80A cosφ㧩0.7㧔0.3sec㧕 20A cosφ㧩0.9 10 20 Operation (x104) _ ○ ○ _ _ _ × Release _ × _ _ _ 10 _ 5 × × _ _ 1 0.5 6 6 Electrical Test 0 20 2 8 2 1 0.5 Operation(x04) _ 2 _ FTR-K3JB02W n=0 8 4 _ _ 10 6 _ _ 20 2 0.5 ○ _ 0 50 0 5 _ _ 5 Time (ms) Electrical Test 10 Contact resistance (mΩ) Voltage (V) Voltage(V) Contact resistance (mΩ) 2 MechanicalTest 4 FTR-K3JB012W n=200 90 Release 70 Distribution of Contact Resistance 100 20 0 Voltage (V) 20 FTR-K3JB012W n=200 Operate Nominal Voltage Multiplying Factor Contact resistance (mΩ) 15 Distribution of Operation & Release Time 90 60 10 Contact Current Load (A) Voltage (V) Distribution (%) 200 AC250 V COSØ=0.7 20 Contact Voltage (V) Distribution (%) 0.1 30 Distribution (%) 20 AC250 V resistive 50 Contact resistance (mΩ) Switching Current (A) 50 Life Curve 100 Service Life (104 operations) Maximum Switching Power 100 FTR-K3JB012W n㧩6 Initial 0.13Hz㧔Duty 38%㧕 AC100V, 200A 20A 3 Operation (x104) FTR-K3 SERIES n DIMENSIONS l Dimensions l Schematics (BOTTOM VIEW) FTR-K3 JB 15.7+0.3 30.1+0.3 (10.45) 12.8 6.35 IN 7.95 23.3+0.3 10.4 #250 l PC board mounting hole layout (BOTTOM VIEW) (1.25) 6.25 0.5 27.6 0.8 1.5 0.8 1.5 0.3 4-φ 1.8 5.75 1.5 12 22 l Dimensions FTR-K3 AB (5.05) l Schematics (BOTTOM VIEW) 30.1+0.3 15.7+0.3 0.5 23.3 +0.3 IN 1.5 0.3 l PC board mounting hole layout (BOTTOM VIEW) 27.6 (1.25) 6.25 0.8 1.5 4-φ 1.8 5.75 0.8 1.5 12 22 (5.05) Unit: mm FTR-K3 SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. FTR-K3 SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2010 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. April 16, 2010.