FTR-JR SERIES POWER RELAY 1 POLE 16 A—SLIM POWER RELAY FTR-JR Series RoHS compliant n Features l1 Pole 16A slim relay with #187 Tab terminal l Nominal Power: 530 mW (35% power reduction compared to VR Series) lCadmium free contacts lInsulation distance: 9.5mm, Dielectric strength: 5K VAC Surge voltage 10K VAC lJB: Tab terminal and contact terminal are connected electrically JC: Tab terminal and contact terminal are not connected electrically lUL Class B (130 ˚C), Flamability 94V-0 lSAFETY STANDARDS UL, CSA, VDE l RoHS compliant since date code: 0434R Please see page 5 for more information To be n APPLICATIONS Di sc lMircrowave oven magnetron, and heater nORDERING INFORMATION [Example] FTR-JR J B 012 W – ** (a) (b)(c) (d) (e) (f ) on ti nu (a ) Series Name FTR-JR Series (b ) Contact Arrangement J : Tab terminal (#187) (c) Coil Type B : 530 mW (TAB and PCB terminals connected) C : 530mW (TAB and PCB terminals unconnected) (d ) Coil Nominal Voltage 012 : 12 VDC 018 : 18 VDC 024 : 24 VDC (e ) Contact Material W : Silver alloy (f) Custom Designation Special Number ed Note: The designation name is stamped on the top of the relay case as follows: (Example: Designation ordered: FTR-JRJB012W Stamp: JRJB012W FTR-JR SERIES n COIL DATA CHART Co i l e s R i s t an c e (± 10%) MODEL No m i n al V o l t ag e FTR-J R Ser i es FTR-JRJ( ) 012W FTR-JRJ( )018W FTR-JRJ( )024W 12 VD C 18 VD C 24 VD C Mu s t Op er at e Mu s t Rel eas e V o l t ag e V o l t ag e 27 0 W 61 0 W 1,10 0 W 9.0 VDC 13.5 VDC 18.0 VDC 0.6 VD C 0.9 VD C 1.2 VD C No m i n al Po o w er 530 m W 530 m W 530 m W Note: All values in the table are measured at 20°C. n specifications It em Contact FTR-J R Ser i es Arrangement 1 Form A (SPST-NO) Material Silver alloy Resistance (initial) Maximum 100 m ohm (at 1A 6VDC) Rating (resistive) 277VAC 16 A Maximum Carrying Current 20A Maximum Switching Rating 4,432VA Maximum Switching Voltage 400 VAC Maximum Switching Current 20A Maximum Switching Load 5 VDC, 10 mA To Coil be Di Nominal Power (at 20˚ C) Operate Power (at 20˚ C) sc *1 Operating Temperature on 530mW 300mW ti -40° C to +85° C (no frost ) nu Time Value Operate Time (at nominal voltage) Maximum 15 ms (excluding bounce time) Release Time (at nominal voltage) Maximum 10 ms (excluding bounce time) Mechanical 2 x 10 operations minimum Life Electrical Other 7 Contact Ratin g 10 x 1 04 operations minimum ed Misoperation Vibration Resistance Endurance 10-55 Hz (double amplitude of 1.65mm) Misoperation Shock Resistance Endurance 200m/s2 (11±1ms) 1,000m/ s2 (6±1ms) Weight Approximately 20 g 10-55 Hz (double amplitude of 2.0mm ) *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. FTR-JR SERIES n INSULATION Item FTR-JR Note Resistance (initial) Minimum 1,000 MΩ at 500 VDC Dielectric Strength open contacts 1,000 VAC (50/60 Hz) 1 min. coil and contacts 5,000 VAC (50/60 Hz) 1 min. Surge Voltage (coil and contact) 10,000 V 1.2 x 50µs standard wave n SAFETY STANDARDS To Type Compliance Contact rating UL UL 508 E36314 Flammability: UL 94-V0 (plastics) 20A, 125VAC (resistive) 16A, 277VAC (resistive) be CSA C22.2 No. 14 LR40304 VDE 0435, 0631, 0700, 0860 Complies with CQC Di sc on ti nu ed FTR-JR SERIES n CHARACTERISTIC DATA Timing 20 100 16 80 Coil Temperature Rise Operating Range 2.2 Operate 12 8 To 4 Release 0 0.2 0.4 0.6 0.8 Coil Power (W) 1.0 1.2 be Nominal Voltage Multiplying Factor Temperature rise (deg.) Timing (ms) 20A 16A 60 40 20 0A 2.0 0A 1.8 1.6 16A 1.4 1.2 1.0 erate p Must O 0.8 perate Must O 0.6 0 0 0.2 0.4 0.6 0.8 Coil Power (W) 1.0 0 1.2 e Voltag oil) (Hot C Voltage oil) (Cool C 20 40 60 80 Ambient Temperature (Co) 100 Maximum Switching Power 20 AC Resistive 10 2 Di 1 0.5 0.2 10 20 50 100 200 500 1000 on Contact Voltage (V) nREFERENCE DATA Distribution of Operate and Release Time Distribution of Operate and Release Voltage FTR-JRJB024W n=100 Operate Release 90 80 Distribution (%) 50 40 30 Contact Resistance (mΩ) 5 50 40 30 60 50 40 20 10 10 10 20 30 40 50 60 70 80 0 90 100 0 1 2 3 Nominal Voltage Multiplying Factor (%) Operate _ _ x x x x _ _ _ _ _ x _ _ x _ Release _ x _ _ _ x x _ 2 1 0.5 Initial 500 _ x _ _ x _ _ x _ FTR-JRJB024W n=20 300 operation/min. 1000 Operation (x104) 2000 5 6 7 8 0 9 10 11 12 0 Time (ms) _ _ 4 Ω 30 20 0 20 10 70 60 tact Resistance (m Ω) 4 80 10 Mechanical Life Test FTR-JRJB024W n=100 90 20 Ω Voltage (V) 8 70 60 20 0 0 12 80 ed Distribution of Contact Resistance 100 FTR-JRJB024W n=100 Operate Release 90 Ω Voltge (V) Distribution (%) 70 16 100 nu Distribution (%) 100 ti 20 18 16 14 12 10 8 6 4 2 0 200 100 50 20 10 5 2 Electrical Life Test FTR-JRJB024W n=10 Operate Release 10 operation/min. 277VAC,16A resistive Ω Voltge (V) 0.1 sc ct Resistance (mΩ) Contact Current (A) 5 20 18 16 14 12 10 8 6 4 2 0 200 100 50 20 10 5 2 2 4 6 8 10 12 14 Electrical Life Test 16 18 20 Contact Resistance (m ) FTR-JRJB024W 100 operation/min. 125V (High voltage Trans n=15 load for Magnetron Oscillation) (Nominal Current 15.5 Arms with phase control) Operate Release FTR-JR SERIES nDIMENSIONS l Dimensions FTR-JB type 15.0+0.3 5.4 4.75 6.75 0.5 1.9 11.0 6.35 (6.25) 25.5+0.0 1 4 Di (0.2) 11.0 3 sc on l Schematics (TOP VIEW) 4.75 6.75 #187 6.35 0.5 ti 1.9 COM 25.5+0.3 6 l PC board mounting hole layout (BOTTOM VIEW) NO 5 nu 1.0+0.2 26.0 11.0 (0.2) 13.5 1.0 1 2 11.0 0.5 (2.8) 4.0 (2.8) ¿1.5 1.0 5.4 O 0.5 23.5 O 1.0 NO COM 4 l Dimensions FTR-JC type (21.05) 2 4 3 2-O 1 ed (30.0) 26.0 (2.0) (2.8) be 0.5 23.5 25.0 25.0 (2.8) 5 13.5 (153.4) O 0.5 NO 6 0.5 To COM #187 (2.0) 30.0+0.0 21.05 l PC board mounting hole layout (BOTTOM VIEW) l Schematics (TOP VIEW) 2-Ø1.5 Unit: mm FTR-JR SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHSon October 21, 2005. (Amendment to Directive 2002/95/EC) l To be Di 2. Recommended Lead Free Solder Profile l sc Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. on ti nu ed We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. FTR-JR SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ To be ©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Di Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. June 30, 2009. sc on ti nu ed