POWER RELAY 1 POLE—15A VS-NR SERIES RoHS compliant n FEATURES UL, CSA, VDE, SEV, SEMKO, CQC recognized TV-8 is available lWorking class: C lUL class B (130°C) insulation lType of service: continuous duty lHeavy duty miniature slim type power relay lHigh isolation in small package —Insulation distance: 8 mm —Dielectric strength: 5,000 VAC (between coil and contacts) —Surge strength: 10,000 V lStandard and high sensitivity types available lFlux free type and plastic sealed type available lLead Free since date code: 0437L2 Please see page 11 for more information lCadmium free is available l l n ORDERING INFORMATION [Example] VS – 12 S M B U – NR – UC (a) (*) (b) (c) (d) (e) (f ) (g) (h) (a) Series Name VS: VS-NR Series (b) Nominal Voltage Refer to the COIL DATA CHART (c) Coil Type Nil: Standard type (700-750 mW) S : High sensitivity type (530 mW) (d) Contact Arrangement M : 1 form A (SPST-NO) (e) Enclosure B : Flux free type C : Plastic sealed type (with tape) K : Plastic sealed type (f) (g) Standard Contact Material Nil: TV rating type U : Non TV rating type (standard type) NR: Silver alloy (h) Safety Standard UC : UL, CSA SM2 : UL, CSA, VDE, SEMKO IM2 : UL, CSA, VDE, SEV, SEMKO Note: Actual marking omits the hyphen (-) of (*) 1 VS-NR SERIES n PART NUMBERS Standard 700 to 750 mW TV-8 rating Ordering Part Number Series Coil Coil Power TV rating Contact VS-3M(B, C, K)-NR 3 720 VS-5M(B, C, K)-NR 5 700 VS-6M(B, C, K)-NR 6 720 VS-9M(B, C, K)-NR 9 700 B: Flux free VS-12M(B, C, K)-NR 12 720 14 700 18 700 C: Plastic sealed with M: 1 form A tape VS-24M(B, C, K)-NR 24 700 VS-36M(B, C, K)-NR 36 700 VS-48M(B, C, K)-NR 48 700 VS-60M(B, C, K)-NR 60 700 VS-100M(B, C, K)-NR 100 750 VS-14M(B, C, K)-NR VS-18M(B, C, K)-NR VSNR TV-8 Contact Material NR: Silver alloy K: Plastic sealed Safety Standard UC: UL,CSA SM2: UL, CSA, VDE, SEMKO Standard 700 to 750 mW Non-TV-8 rating Coil Coil Power VS-3M(B,C,K)U-NR 3 720 VS-5M(B,C,K)U-NR 5 700 VS-6M(B,C,K)U-NR 6 720 VS-9M(B,C,K)U-NR 9 700 VS-12M(B,C,K)U-NR 12 720 14 700 18 700 VS-24M(B,C,K)U-NR 24 700 VS-36M(B,C,K)U-NR 36 700 VS-48M(B,C,K)U-NR 48 700 VS-60M(B,C,K)U-NR 60 700 VS-100M(B,C,K)U-NR 100 750 Ordering Part Number VS-14M(B,C,K)U-NR VS-18M(B,C,K)U-NR Series VS-NR TV rating Contact Contact Material Safety Standard B: Flux free C: Plastic sealed M: 1 form A with tape K: Plastic sealed No TV-8 NR: Silver alloy UC: UL,CSA VD3: UL/CSA/ VDE VS-NR SERIES n PART NUMBERS High Sensitive type 530 mW Non-TV-8 rating Ordering Part Number Series Coil Coil Power TV rating Contact VS-3SM(B, C, K)U-NR 3 VS-5SM(B, C, K)U-NR 5 VS-6SM(B, C, K)U-NR 6 VS-9SM(B, C, K)U-NR 9 B: Flux free VS-12SM(B, C, K)U-NR 12 C: Plastic sealed with M: 1 form A tape VS-14SM(B, C, K)U-NR VS-18SM(B, C, K)U-NR VSNR 14 18 VS-24SM(B, C, K)U-NR 24 VS-36SM(B, C, K)U-NR 36 VS-48SM(B, C, K)U-NR 48 VS-60SM(B, C, K)U-NR 60 VS-100SM(B, C, K)U-NR 100 530 K: Plastic sealed Contact Material NR: NonSilver TV-8 alloy Safety Standard UC: UL,CSA VD3: UL/ CSA/VDE VS-NR SERIES n COIL DATA CHART Standard Coil Voltage Nominal Voltage Max. Coil Voltage*1 Coil Resistance ( ±10%) Must Operate Voltage*2 Must Release Voltage*2 Coil Power 3 3 VDC 4.95 VDC 12.5 Ω 2.1 VDC 0.3 VDC 720 mW 5 5 VDC 8.25 VDC 36 Ω 3.5 VDC 0.5 VDC 700 mW 6 6 VDC 9.90 VDC 50 Ω 4.2 VDC 0.6 VDC 720 mW 9 9 VDC 14.85 VDC 115 Ω 6.3 VDC 0.9 VDC 700 mW 12 12 VDC 19.8 VDC 200 Ω 8.4 VDC 1.2 VDC 720 mW 14 14 VDC 23.1 VDC 280 Ω 9.8 VDC 1.4 VDC 700 mW 18 18 VDC 29.7 VDC 460 Ω 12.6 VDC 1.8 VDC 700 mW 24 24 VDC 39.6 VDC 820 Ω 16.8 VDC 2.4 VDC 700 mW 36 36 VDC 59.4 VDC 1,850 Ω 25.2 VDC 3.6 VDC 700 mW 48 48 VDC 79.2 VDC 3,300 Ω 33.6 VDC 4.8 VDC 700 mW 60 60 VDC 99.0 VDC 5,100 Ω 42.0 VDC 6.0 VDC 700 mW 100 100 VDC 165 VDC 13,400 Ω 70.0 VDC 10.0 VDC 750 mW High Sensitive Coil Voltage Nominal Voltage Max. Coil Voltage*1 Coil Resistance ( ±10%) Must Operate Voltage*2 Must Release Voltage*2 Coil Power 3 3 VDC 4.95 VDC 17 Ω 2.1 VDC 0.3 VDC 530 mW 5 5 VDC 8.25 VDC 47 Ω 3.5 VDC 0.5 VDC 530 mW 6 6 VDC 9.90 VDC 68 Ω 4.2 VDC 0.6 VDC 530 mW 9 9 VDC 14.85 VDC 115 Ω 6.3 VDC 0.9 VDC 530 mW 12 12 VDC 19.8 VDC 270 Ω 8.4 VDC 1.2 VDC 530 mW 14 14 VDC 23.1 VDC 370 Ω 9.8 VDC 1.4 VDC 530 mW 18 18 VDC 29.7 VDC 610 Ω 12.6 VDC 1.8 VDC 530 mW 24 24 VDC 39.6 VDC 1,000 Ω 16.8 VDC 2.4 VDC 530 mW 36 36 VDC 59.4 VDC 2,450 Ω 25.2 VDC 3.6 VDC 530 mW 48 48 VDC 79.2 VDC 4,400 Ω 33.6 VDC 4.8 VDC 530 mW 60 60 VDC 99.0 VDC 6,800 Ω 42.0 VDC 6.0 VDC 530 mW 100 100 VDC 165 VDC 18,860 Ω 70.0 VDC 10.0 VDC 530 mW Note: All values in the table are measured at 20°C. *1: No contact current at 20°C *2: Specified values are subject to pulse wave voltage VS-NR SERIES n SPECIFICATIONS Item Contact Arrangement TV-8 Rating Type Standard VS-( )M-NR VS-( )MU-NR 1 form A (SPST-NO) Material Silver alloy Style Single Resistance (initial) (at 1A 6VDC) Max. 100mΩ Rating (resistive) 15A 240VAC / 24VDC Max. Carrying Current*1 15A Max. Switching Power 1800VA / 360W Max. Switching Voltage 250 VAC / 150VDC Min. Switching Load*2 100mA 5VDC Max. Inrush Current (at lamp load) 117A 120VAC Nominal Power (at 20˚C) Standard type: 700 to 750mW. High sensitive type: 530mW Operate Power (at 20˚C) Standard type: 350 to 370mW. High sensitive type: 260mW Operating Temperature Standard type: -40ºC to +65ºC. High sensitive type: -40ºC to +75ºC (no frost) Time Value Operate (at nominal value) Maximum 15ms Release (at nominal value) Maxiumum 10ms Life Mechanical 2x107 operations minimum Coil Electrical Other - Contact rating 1x105 operations minimum (resistive) Motor 5x104 operations minimum (at 1/4 HP 120VAC UL HP rating) Lamp 2.5x104 operations minimum Vibration Resistance Misoperation 10 to 55 Hz (double amplitude of 1.5mm) Endurance 10 to 55 Hz (double amplitude of 1.5mm) Shock Resistance Misoperation 100m/s2 (11±1m/s) Endurance 1,000m/s2 (6±1m/s) Weight 3x104 operations minimum (at 1/4 HP 120VAC UL HP rating) Approximately 17g *1 When max. carrying current is more than 10A, PCB layout needs to be considered. *2 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. VS-NR SERIES n SAFETY STANDARDS Type Compliance Contact rating UL UL 508 Flammability: UL 94-V0 (plastics) Isolation: classB 10A, 240VAC(resistive) 1/2 hp, 240VAC/120VAC 1/3 hp, 120VAC / 240VAC Pilot duty: B150 [TV-8] 15A, 120VAC/24VDC (resistive) 1/3 hp, 240VAC/120VAC E56140 CSA C22.2 No. 14 LR 35579 VDE DIN EN 61810-1 15A 250VAC (cosØ=1) 4.3A 250VAC (cos=0.4) 15A 24VDC (0ms) 15A/120VAC, 250VAC Complies with SEV, SEMKO, NEMKO, DEMKO, FIMKO, CQC, VDE, n INSULATION Item VS Note Resistance (initial) Minimum 1,000 MΩ 1 min. at 500 VDC Dielectric Strength open contacts 1,000 VAC (50/60 Hz) 1 min. 10mA detection current coil and contacts 5,000 VAC (50/60 Hz) 1 min. 10mA detection current Surge Voltage (coil and contact) 10,000 V Clearance/Creepage 8 mm / 8 mm Insulation (DIN EN61810-1 VDE0435) Voltage Pollution Isolation material group 250 V 2 III 1.2 x 50µs standard wave VS-NR SERIES n CHARACTERISTIC DATA Timing Timing 120 CoilTemperatureRise VS-NR Operate Release Release 0 0.4 0.8 1.2 CoilPower(W) 1.6 2 Life Curves 1.8 1.6 0A 1.4 15 A 1.2 oil) C (Hot oltage erateV Op O il) oolCo age(C Volt perate 0 10 20 30 40 50 60 70 80 90 100 110 Ambienttemperature(°C) Operation (x104) 2.0 SwitchingCurrent(A) NominalVoltageMultiplyingFactor 50 VS-NR 2.2 0.6 0A 40 100 2.4 0.8 15A 60 0 MaximumSwitchingPower OperatingRange 80 20 Coil Power (W) Coil Power (W) 1.0 TemperatureRise(deg.) Operate Time (ms) Time (ms) 100 ACresistive 20 10 5 2 1 DCresistive 0.5 120VAC resistive 240VAC resistive 24VDC resistive 120VAC cosφ=0.4 240VAC cosφ=0.4 0.2 10 20 50 100 200 ContactVoltage(V) 500 1000 Contact Current (A) VS-NR SERIES n REFERENCE DATA Operate Release Distribution (%) Nominal Voltage Mult. Factor (%) Operate Voltage (V) Voltage (V) Electrical Test Operate Release Release Release Make Break Contact resistance (mΩ) Voltage (V) Contact resistance (mΩ) Contact Resistance (mΩ) Electrical Test 1200 ops Operation (x104) Make Break Time (ms) Mechanical Test Operate Distribution of Contact Resistance Make 30 ops./min. 120VAC 15A (resistive) Initial Operation (x104) Contact resistance (mΩ) Distribution (%) Operate Release Distribution of Operate & Release Time Distribution (%) Distribution of Operate & Release Voltage 30 ops./min. 24VDC 10A (resistive) Make Initial Operation (x104) VS-NR SERIES n DIMENSIONS l Dimensions l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) VS-M-NR type VS-MK-NR type (Plastic sealed) 29.2 ±0.2 1 2-φ 1.3 2 2-φ 1 (2.7) 12.9 ±0.2 7.5 25.3 +0.2 COM NO 3.5 5 0.6 0.32 3.5 φ 0.5 20 3 3.5 20 (2.5) 1 7.5 VS-MC-NR type (Plastic sealed with tape) Unit: mm VS-NR SERIES VS-K type (Plastic sealed type) VS-MC type (Plastic sealed type with tape) VS-C type (Plastic sealed type with tape) Unit: mm 10 VS-NR SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. 11 VS-NR SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. February 4, 2008. 12