MINIATURE RELAY 1 POLE—1 to 2 A (FOR SIGNAL SWITCHING) FBR211 SERIES RoHS compliant n FEATURES 2 A maximum carrying current Capable of 2 A maximum continuous carrying current in the contact l Superior reliability gold-overlay contacts P type: Gold-overlay silver-palladium contacts l International terminal pitch of one inch grid terminal layout l High sensitivity, low power dissipation types also available Standard types: 0.45 W (A or B type) High sensitivity types: 0.2 W (C or E type) l Conforms to FCC 68.302 (high dielectric strength type) l UL recognized (File number E63615) l CSA recognized (File number LR64026) l RoHS compliant since date code: 0433A Please see page 5 for more information l To be Di n ORDERING INFORMATION [Example] sc on FBR211 S A D012 U – P 2 (–CSA) (a) (b) (c) (d) (e) (f ) (g) (h) ti nu (a) Series Name (b) Enclosure FBR211 (c) Coil Power and Schematics A: Standard A type (nominal power 450 mW type) B: Standard B type C: High sensitivity C type (nominal power 200 mW type) E: High sensitivity E type S: Flux free type N: Plastic sealed type } } ed (d) Nominal Voltage (Example) D003: 3 VDC D012: 12 VDC (refer to the COIL DATA CHART) (e) UL Marking on Cover Nil : No UL marking U : UL marking (f ) Contact Material P : Gold-overlay silver-palladium M : Gold-overlay silver (g) Special Type Nil : Standard 2 : High dielectric strength type (h) CSA Marking Nil : Standard -CSA : UL + CSA marking (valid when (e) is U) Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR211SAD005-P Stamp:211SAD005-P 1 FBR211 SERIES n COIL DATA CHART 1. STANDARD (A or B type) MODEL Nominal Nominal Coil current Must Must Maximum Nominal Coil A type B type resistance (at nominal operate release allowable temperature voltage power (±10%) voltage) voltage voltage voltage rise Flux free Plastic sealed Flux free Plastic sealed approx. FBR211SAD001-n FBR211NAD001-n FBR211SBD001-n FBR211NBD001-n 1.5 VDC 5 Ω 300 mA FBR211SAD003-n FBR211NAD003-n FBR211SBD003-n FBR211NBD003-n 20 Ω 150 mA 3 VDC FBR211SAD005-n FBR211NAD005-n FBR211SBD005-n FBR211NBD005-n 5 VDC 56 Ω 89 mA 70% max. 10% min. 150% of Approx. Approx. FBR211SAD006-n FBR211NAD006-n FBR211SBD006-n FBR211NBD006-n 6 VDC 80 Ω 75 mA of nominal of nominal nominal 450 mW 45 deg voltage voltage voltage (at nominal (at nominal FBR211SAD009-n FBR211NAD009-n FBR211SBD009-n FBR211NBD009-n 9 VDC 180 Ω 50 mA voltage) voltage) To FBR211SAD012-n FBR211NAD012-n FBR211SBD012-n FBR211NBD012-n 12 VDC 320 Ω 38 mA FBR211SAD024-n FBR211NAD024-n FBR211SBD024-n FBR211NBD024-n 24 VDC 1,280 Ω 19 mA be Note: All values in the table are measured at 20°C. 2. HIGH SENSITIVITY (C or E type) Di MODEL Nominal Nominal Coil current Must Must Maximum Nominal Coil C type E type resistance (at nominal operate release allowable power temperature voltage (±10%) voltage) voltage voltage voltage rise Flux free Plastic sealed Flux free Plastic sealed approx. sc FBR211SCD001-n FBR211NCD001-n FBR211SED001-n FBR211NED001-n 1.5 VDC 12 Ω 125 mA FBR211SCD003-n FBR211NCD003-n FBR211SED003-n FBR211NED003-n 45 Ω 67 mA 3 VDC on FBR211SCD005-n FBR211NCD005-n FBR211SED005-n FBR211NED005-n 5 VDC 120 Ω 42 mA 70% max. 10% min. 225% of Approx. Approx. FBR211SCD006-n FBR211NCD006-n FBR211SED006-n FBR211NED006-n 6 VDC 180 Ω 33 mA of nominal of nominal nominal 200 mW 25 deg voltage voltage voltage (at nominal (at nominal FBR211SCD009-n FBR211NCD009-n FBR211SED009-n FBR211NED009-n 9 VDC 400 Ω 23 mA voltage) voltage) FBR211SCD012-n FBR211NCD012-n FBR211SED012-n FBR211NED012-n 12 VDC 700 Ω 17 mA FBR211SCD024-n FBR211NCD024-n FBR211SED024-n FBR211NED024-n 24 VDC 2,800 Ω 9 mA Note: All values in the table are measured at 20°C. ti nu ed FBR211 SERIES n SPECIFICATIONS Item Standard (A or B type) High sensitive (C or E type) Contact Arrangement 1 form C (SPDT) Material Gold-overlay silver-palladium / gold-overlay silver Resistance (initial) Maximum 100 mΩ (at 0.1 A 6 VDC) Rating (resistive) 0.5 A 120 VAC or 1 A 28 VDC Maximum Carrying Current 2A To Maximum Switching Power Max. Switching Voltage* 1 Maximum Switching Current be Minimum Switching load* (reference) 2 60 VA or 28 W 220 VAC or 150 VDC 1.25 A (AC) or 2 A (DC) Plastic sealed 1 mA, 1V Flux free 1 mA, 5V Coil Nominal Power (at 20°C) Approximately 450 mW Operate Power (at 20°C) Approximately 315 mW maximum Approximately 140 mW maximum Operating Temperature –25°C to +55°C (no frost) –25°C to +75°C (no frost) Operating Humidity 45 to 85%RH Time Value Operate (at nominal voltage) Maximum 5 ms Release (at nominal voltage) Maximum 5 ms Life Mechanical 5 × 106 operations minimum Di sc Approximately 200 mW on Electrical (Refer to the REFERENCE DATA) 3 × 105 operations minimum (at 1 A/ 28 VDC resistive load) 1 × 105 operations minimum (at 2 A/ 12 VDC resistive load) 1 × 105 operations minimum (at 0.5 A/120 VDC resistive load) Other Vibration Resistance 10 to 55 Hz (double amplitude of 1.5 mm) Shock Resistance Misoperation 100 m/s2 (11±1 ms) Endurance 1,000 m/s2 (11±1 ms) Weight Approximately 4 g ti nu 60 m/s2 (11±1 ms) ed *1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operation environment. n INSULATION Item Standard (A or B) Isolation (initial) Minimum 100 MΩ (at 500VDC) Dielectric Strength 500VAC 1 min. (standard) 1,500VAC 1 min. (high isolation coil and contact) n SAFETY STANDARDS High sensitive (C or E) Type Compliance Contact rating UL UL 110 E63615 CSA C22.2 No. 14 LR 40304, LR 46016 Flammability: UL 94-V0 (plastics) 0.5A, 120VAC (resistive) 1A, 28VDC (resistive) FBR211 SERIES CHARACTERISTIC DATA e ag olt il v co le ab ow all 110 100 90 Operating voltage range 80 70 To Must ltage te vo opera 140 130 120 80 70 o Must 50 40 be 30 20 0.2 0.4 0.6 ( 1.0 0.5 0.1 DC contact rating) sc 0.3 10 0.8 20 30 on 50 0.4 60 40 50 12 V DC resistive load 10 5 0 0 10 20 30 40 50 60 70 80 Nominal voltage multiplying factor (%) 28 V DC resistive load 120 V AC resistive load 0 0.5 1.0 1.5 2.0 Contact load current (A) FBR211 n = 100 ed 40 20 20 0 0.8 Life curve 20 10 0.6 Coil power (W) nu 60 Distribution (%) 30 e Distribution of contact resistance 80 FBR211 n = 100 Operate Release 80 40 ti Distribution of operate and release time 100 Operate Release tim 100 1 120 Contact load current (A) Distribution (%) Distribution (%) 50 0.2 (x104) 200 (○ AC contact rating) Di Distribution of operate and release voltage te 2 0 DC resistive load n REFERENCE DATA FBR211 n = 100 era 1 ge AC resistive load Coil power (W) 60 volta Maximum switching capacity Contact load current (A) Coil temperature rise (°C) 60 Op 3 Operating temperature (°C) Standard (0.45 W type) High sensitive (0.2 W type) perate –10 0 10 20 30 40 50 60 70 80 Coil temperature rise data (at 20°C) Not including bounce time 4 Release time Operating temperature (°C) 70 (Data) assumes that the maximum allowable temperature of E type insulation coil is 115°C Operating voltage range 110 100 90 –10 0 10 20 30 40 50 60 70 80 Operate and release time data 5 Time (msec) um xim Ma 140 130 120 160 150 Nominal voltage multiplying factor (%) (Data) assumes that the maximum allowable temperature of E type insulation coil is 115°C 160 150 Range of operation temperature and voltage (high sensitive 0.2 W type) ge volta coil able llow ma imu Max Nominal voltage multiplying factor (%) Range of operation temperature and voltage (Standard 0.45 W type) Service life (operations) n 0 0 1 2 3 4 5 Time (ms) 6 7 8 0 10 20 30 40 50 60 70 80 Contact resistance (mΩ) FBR211 SERIES n DIMENSIONS 1. STANDARD (Flux free type) Dimensions Schematics (BOTTOM VIEW) (A type or C type) 15.1 +0.5 To 0.3 7.62 (1.24) 3.2 10.5+0.5 10.1 +0.5 0.6 0.35 (1.2) 10.16 0.3 0.6 7.62 (2.04) (1.9) Di 10.16 sc 2.54 7.62 2.54 1 5 6 12 8 7 12 8 7 (B type or E type) 1 5 6 1 5 6 12 8 7 12 8 7 on PC board mounting hole layout (BOTTOM VIEW) 10.16 6 (A type or C type) 16.5 3. PC BOARD MOUNTING HOLE LAYOUT 6–ø1.0 5 Schematics (BOTTOM VIEW) +0.5 3.2 be 10.7+0.5 11.7 1 2.54 2. N-TYPE (Plastic sealed type) Dimensions +0.5 (B type or E type) ti nu ed Unit: mm FBR211 SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l To be Di sc 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. on ti nu ed We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. FBR211 SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ To be Di ©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. sc Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. June 30, 2009. on ti nu ed