COMMUNICATIONS MODULES & SUBSYSTEMS Metro-Access Single Channel Erbium Doped Fiber Amplifier BrightAmp Key Features • Protocol and data rate independent – including 10 G/OC-192 applications • Simple-to-install, rugged, plug-and-play module • Deployable in central office and customer premise locations • Front panel switch allows configuration as a booster, an inline, or a pre-amplifier • Typical 14 dBm saturated output power; 26 dB small signal gain; 6 dB noise figure Applications • Single-channel optical amplification • Reach extension Compliance • NEBS 3 compliant • GR-1312 compliant • FDA Class 1M laser device • FCC Class A device • UL 60950 Third Edition NORTH AMERICA : 800 498-JDSU (5378) The WaveReady™ 3000 series BrightAmp configurable single-channel optical amplifier is designed to provide simple and economical C-band optical amplification for single-channel applications, in a flexible and ready-to-use package. This erbium-doped fiber amplifier (EDFA) is network-ready and includes a switch on the front panel that enables field personnel to install and configure the module in seconds as a booster or inline/pre-amplifier. Front panel LEDs indicate module status, while integrated electronics provide simple alarm and control functionality. An RS-232 interface and Ethernet port (through a communications module) allow for remote management. A flexible package design allows the module to be deployed in either the WaveReady 3500 or 3100 systems which mount onto 19- or 23-inch telecommunications racks. WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com METRO-ACCESS SINGLE CHANNEL ERBIUM DOPED FIBER AMPLIFIER 2 Reach Extension Customer Equipment Customer Equipment SMF SMF 1530 to 1565 nm -8 to 3 dBm 1530 to 1565 nm 13 to 17 dBm SMF SMF 1530 to 1565 nm -30 to -8 dBm 1530 to 1565 nm Small signal gain of more than 26 dB and output power limit of 11 dBm Tx Tx Rx Customer Equipment Rx Customer Equipment Performance Specifications1 Parameter Optical Characteristics Operating wavelength range Return loss Booster Optical Characteristics Output power (-8 dBm < Pin < 3 dBm) Output power stability over temperature and lifetime Pre/Inline Amplifier Optical Characteristics Maximum output power (including Amplified 11 dBm Spontaneous Emission) at input of -30 to -8 dBm Gain (input -30 ≤ Pin ≤-26 dBm)2 Polarization ratio (E-vector is vertical) Noise figure (Pin ≤ -15 dBm)2 Electrical Characteristics DC supply voltage Alarm relay signals Physical Dimensions Size (H x W x L) Weight Environmental Characteristics Operating ambient temperature Storage temperature Relative humidity (non-condensing) Minimum Typical Maximum 1530 nm -40 dB -45 dB 1560 nm - 13 dBm - 14 dBm - 17 dBm 0.5 dB - - 11 dBm 25 dB >100:1 - 26 dB 6 dB 6.5 dB - -48 V Dry contact - - - - 6.8 x 1.0 x 8.8 inches (17.27 x 2.54 x 22.35 cm) 1.5 lbs (0.68 kg) -5°C -40°C 5% - 55°C 85°C 95 % Note: This product should be deployed in accordance with your company’s deployment directives. 1. Unless otherwise noted, all specifications are guaranteed over the life, operating temperatures, wavelength range, and input voltage range specified. 2. BrightAmp can be used over the wavelength range of 1530 to 1565 nm. The performance specifications remain the same except for the following: Gain (input -30 ≤ Pin ≤-26 dBm): 22 dB (Minimum), 23 dB (Typical) Noise figure (Pin ≤ -15 dBm): 6 dB (Typical), 7 dB (Maximum) - METRO-ACCESS SINGLE CHANNEL ERBIUM DOPED FIBER AMPLIFIER Interface Specifications Parameter Specification Optical (physical) Electrical (physical) Craft Alarms SC/PC bulkheads. SMF on input A and output B 96-pin connector (power, alarms, craft) Menu and TL1 interfaces. Accessibility to craft interfaces depends on the mounting solution Relay, dry contact, MAJ (major; unit fail and LOS), MIN (minor; pump current threshold). Relay closed when alarm is active Power (CARD); Major Alarm (MAJ); Minor Alarm (MIN); Loss of input signal (LOS A) 2 positions (booster-amp and inline/pre-amp) Front panel LEDs Front panel configuration switch Ordering Information For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at [email protected]. Sample: 10129127 Associated Parts Product Code 10129127 Product Code 10129126 10132805 Description BrightAmp Configurable Single-Channel Optical Amplifier Description DenseMount Shelf COMM Module Safety Information The BrightAmp is an FDA Class 1M Laser Product and requires no special eye safety precautions. C L AS S 1M L AS E R P R O DUC T All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products herein are free from any intellectual property claims of others. Please contact JDSU for more information. BrightSwitch, FiberShelf, JDSU and the JDSU logo are trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. ©2006 JDS Uniphase Corporation. All rights reserved. 21024195 Rev. 005 01/06 BRIGHTAMP.DS.CMS.AE NORTH AMERICA : 800 498-JDSU (5378) WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com