Communications componentS 850 nm 2.5 G ROSA PL-SxR-00-S23-Cx Key Features •Multi-rate capable up to 2.5 Gbps •Low power consumption with 15mA typical operating current at 3.3 V •Optimized for -40 °C to 85 °C Transceiver Applications •Differential output •Optional 5th lead for Received Signal Strength Indicator (RSSI) •Connectorized PIN plus preamplifier Benefits •RSSI for digital diagnostics transceiver applications •Excellent sensitivity •Fully tested for optimum alignment and performance •Industrial temperature operation •Industry standard form factor and size NORTH AMERICA: 800 498-JDSU (5378) The JDSU 850 nm 2.5 Gbps LC/SC connectorized ROSA (Receiver Optical SubAssembly) is designed for high-speed data communication applications in Fibre Channel, Gigabit Ethernet transceiver modules. The product utilizes a PIN/TIA integrated in a TO-46 package aligned to a precision plastic barrel. Each part is electro-optically tested to ensure optimum performance and yield in the application. The PL-SxR-00-S23-Cx converts optical power into an electrical signal at data rates up to 2.5 Gbps and is engineered for performance over extended operating temperature and power conditions with high reliability. It can be used with 50/125 mm and 62.5/125 mm multi-mode fiber. worldwide: +800 5378-JDSU WEBSITE: www.jdsu.com 850 nm 2.5 G ROSA Mounting Dimensions 4 Lead LC Version (PL-SLR-00-S23-C0) 0.159±0.002 0.026±0.002 0.164±0.002 0.260±0.002 PIN 4 +0.001 0.200 - 0.003 PIN 1 0.115±0.001 PIN 2 PIN 3 0.05±0.001 2X 0.234±0.002 0.560 0.500 0.100 +0.010 0.212 - 0.020 OPTICAL PLANE 4X 0.019 0.016 UNITS: INCHES PL-SLR-00-S23-C0 Pin Symbol Function 1 2 3 4 Vout-P Vdd Vout-N GND TIA Output Voltage (Non-Inverted) Positive Supply Voltage TIA Output Voltage (Inverted) Ground, Case 5 Lead LC Version (PL-SLR-00-S23-C1) PL-SLR-00-S23-C1 Pin Symbol Function 1 2 3* 4 5 Vout-P Vdd Imon Vout-N GND TIA Output Voltage (Non-Inverted) Positive Supply Voltage Average Power Monitor Current (RSSI) TIA Output Voltage (Inverted) Ground, Case *RSSI Pin 3 Connections -C1: Connect Pin 3 to ground with a resistor <2500Ω 850 nm 2.5 G ROSA (Continued) Mounting Dimensions 4 SC Lead Version (PL-SSR-00-S23-C0) Units: inches PL-SSR-00-S23-C0 Pin Symbol Function 1 2 3 4 Vout-P Vdd Vout-N GND TIA Output Voltage (Non-Inverted) Positive Supply Voltage TIA Output Voltage (Inverted) Ground, Case 5 Lead Version (PL-SSR-00-S23-C1) Units: inches *RSSI Pin 3 Connections: -C1: Connect Pin 3 to ground with a resistor <2500 Ω PL-SSR-00-S23-C1 Pin Symbol Function 1 2 3* 4 5 Vout-P Vdd Imon Vout-N GND TIA Output Voltage (Non-Inverted) Positive Supply Voltage Average Power Monitor Current (RSSI) TIA Output Voltage (Inverted) Ground, Case 850 nm 2.5 G ROSA Absolute Maximum Ratings (Vdd=3.3 V, Tcase = 25 °C unless otherwise stated) Parameter Symbol Storage temperature Tst Incident optical power Pin Lead solder temperature Ts Power supply voltage VP ESD1 Ratings Unit -40 to +125 °C +6 dBm 260 °C for 10 sec. 2 mm from case 3.8 V Class 1 Note: Conditions exceeding those listed may cause permanent damage to the device. Devices subjected to conditions beyond the limits specified for extended periods of time may adversely affect reliability. 1. HBM Electro-optical Characteristics Parameter (Vdd=3.3 V, Tcase = -40 °C to 85 °C unless otherwise stated) Symbol Minimum Typical Maximum Wavelength responsivity l 770 850 860 Case operating temperature Top -40 85 2.97 3.3 3.63 Supply voltage Vcc Supply current Icc 15 20 Bandwidth1 BW 1.8 Low frequency cutoff 50 Responsivity (@50 MHz, differential)1 R 1300 Sensitivity2 S -21 -22 Output resistance Ro 50 Optical overload2 0 Differential output voltage3 Vout 250 Total jitter (pk-pk)4 TJ 55 Rise/Fall time3 tr/tf 95 160 Slope of Imon vs Pin5 Imon slope 1 Imon current with zero input5 Imon offset 40 Imon linearity range5 Imon range 1100 1. Pin = -13 dBm, Rload - 100 W (differential) 2.10-12 BER with a 27-1 PRBS @ 2.125 Gbps 3.27-1 PRBS @ 2.125 Gbps, Pin = -3 dBm, Rload = 100 W (differential) 4.6s about the center eye crossing, Pin = -15 dBm 5.Average current Unit nm °C V mA GHz kHz V/W dBm W dBm mV ps ps A/W uA uA 850 nm 2.5 G ROSA Order Information For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at [email protected]. Sample: PL-SSR-00-S23-C0 Part Number PL-SSR-00-S23-C0 PL-SSR-00-S23-C1 PL-SLR-00-S23-C0 PL-SLR-00-S23-C1 Description 850 nm 2.5 G SC ROSA, 850 nm 2.5 G SC ROSA with RSSI 850 nm 2.5 G LC ROSA 850 nm 2.5 G LC ROSA with RSSI NORTH AMERICA: 800 498-JDSU (5378) worldwide: +800 5378-JDSU WEBSITE: www.jdsu.com Product specifications and descriptions in this document subject to change without notice. © 2008 JDS Uniphase Corporation 30149326 501 0508 PL-SXR-00-S23-CX.DS.CC.AE May 2008