Communications componentS 850 nm 8.5 G ROSA PL-xxR-00-SH3-C6 Key Features •Data rates up to 8.5 Gbps •3.3 V operation •-40 °C to 85 °C operation •Differential output •Isolated case •Received signal strength indicator (RSSI) •LC or SC connectorized PIN plus preamplifier Benefits •Optional controlled impedance flex from OSA to PCBA for excellent 8.5 Gbps product performance •Industrial operational temperature •Industry standard form factor and size •Modulation performance verification The JDSU 850 nm PL-xxR-00-SH3-C6 connectorized ROSA product (Receiver Optical Sub-Assembly) is designed for high-speed data communication applications. The product utilizes a GaAs PIN/TIA integrated in a custom hermetic TO package. Each device is actively aligned to a precision OSA housing using a proprietary alignment algorithm and tested to precise requirements. A controlled impedance flex circuit provides the user with optimum performance. The PL-xxR-00-SH3-C6 converts optical power into an electrical signal at data rates up to 8.5 Gbps and is engineered for performance over extended operating temperature and power conditions with high reliability. Each part is electro-optically tested to insure optimum performance and sensitivity. NORTH AMERICA: 800 498-JDSU (5378) worldwide: +800 5378-JDSU WEBSITE: www.jdsu.com 850 nm 8.5 G ROSA ROSA without Flex Dimensions (LC) REV UNITS: MM .X = 0.2 .XX = 0.10 .XXX = 0.050 DESCRIPTION ECO ENG DATE CHECKED DATE 006501 DWP 31 OCT 06 PB 01 NOV 06 UPDATED DRAWING TO REFLECT CHANGES TO PARENT DWG 006785 AK 20 FEB 07 DAC 27 FEB 07 CORRECTED PIN DIAMETERS 007261 DB 21 JUN 07 CW 21 JUN 07 01 INITIAL RELEASE 02 03 10 MAX ROTATIONAL MISALIGNMENT BETWEEN TO CAN ASSY AND BARREL +0.050 4.039 - 0.025 2X 5.941 0.660 6.599 BARREL KEYING FEATURE 2.083±0.025 A 5X 13.460 2.540 +0.025 5.080 - 0.076 2X 0.838±0.025 PIN 4 2X 82° 0.250 PIN 1 A 3X 1.270 45°±1° PIN 3 PIN 2 2.921±0.025 2X 41° PIN 5 0.440 +0.38 6.50 - 0.25 4.039 OPTICAL REF PLANE 4.166 45°±1° ENG MUST CONFORM TO PICOLIGHT QUALITY PROCEDURE 07000056 SECTION A-A PL-SxR-00-SH3-C6 (no flex) Pin Symbol Function 1 2 3 4 5 Vout P Vdd RSSI Vout N GND TIA Output Voltage (Non-Inverted) Positive Supply Voltage Receive Signal Power, Avg. Current TIA Output Voltage (Inverted) Ground UNLESS OTHERWISE SPECIFIED D PAQUET DIMENSIONS ARE IN MILLIMETERS DRAWN UNLESS OTHERWISE SPECIFIED D PAQUET CHECKED DATE 31 OCT 06 DATE 31 OCT 06 DATE 1480 ARTHUR AVENUE Ph 303-530-3189 LOUISVILLE, COLORADO 80027 Fx 303-530-4897 DWG, DATASHEET, ROSA 10G, LC, 4+1, STACK PIN, ULTEM 850 nm 8.5 G ROSA ROSA with Flex Dimensions (LC) UNITS: MM .X = 0.2 .XX = 0.10 .XXX = 0.050 +0.050 4.039 - 0.025 2X 5.941 0.660 6.599 5X 1 A PIN 3 PIN 2 2.083±0.025 BARREL KEYING FEATURE 5.080+0.025 - 0.076 PIN 4 0.838±0.025 2.921±0.025 90°±10° PIN 1 A PIN 5 10.80 1.270 6.18+0.38 - 0.25 PAD 1 PAD 6 0.80 PAD PITCH 45.0°±0.5° 0.13 0.40 4.039 1.12 0.92 0.46 4.166 0.30 0.38 2X 0.71 DETAIL B 45.0°±0.5° 2X 2.28 OPTICAL REF PLANE SECTION A-A PL-FxR-00-SH3-C6 (with flex) Pad Symbol Function 1 2 3 4 5 6 Vcc GND Vout P Vout N GND RSSI Vcc Ground TIA Output Voltage (Non-Inverted) TIA Output Voltage (Inverted) Ground Receive Signal Power, Avg. Current 0.5 B 4.840 850 nm 8.5 G ROSA Shipping Information Shipped in anti-static stackable trays. Absolute Maximum Ratings (Tcase = 30 °C , Continuous Wave (CW) operation unless otherwise stated) Parameter Symbol Storage temperature Tst Incident optical power Pin Lead solder temperature Ts Flex attach temperature TF Power supply voltage VP Ratings Unit -40 to +100 °C +5 dBm 260 °C for 10 sec. 2 mm from case 370 °C for 10 sec. 4.0 V Note: Conditions exceeding those listed may cause permanent damage to the device. Devices subjected to conditions beyond the limits specified for extended periods of time may adversely affect reliability. Electro-optical Characteristics Parameter (Tcase = 30 °C , Vcc = 3.3 V unless otherwise stated) Symbol Minimum Typical Maximum Wavelength responsivity l 840 850 860 -40 85 Case operating temperature Top Supply voltage Vcc 2.97 3.3 3.63 Supply current Icc 34 45 61 Bandwidth BW 6.375 Low frequency cutoff BWLF 70 Responsivity (@50 MHz) R 5000 Sensitivity (OMA) S -15 -14 Output resistance Ro 100 Optical overload 1.5 Differential output voltage Vout 285 Duty cycle distortion 1 10 Rise/Fall time tr/tf 50 Slope of RSSI vs Pin RSSI slope 0.9 1 1.1 RSSI current with zero input1 RSSI offset 1 RSSI linearity range RSSI range 5 1100 1. Connect RSSI to ground with a resistor <2500 ohms. Unit nm °C V mA GHz kHz V/W dBm W dBm mV % ps A/W uA uA 850 nm 8.5 G ROSA Order Information For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at [email protected]. Sample: PL-SLR-00-SH3-C6 Part Number PL-SLR-00-SH3-C6 PL-FLR-00-SH3-C6 Description 850 nm 10 G ROSA with LC housing, without flex 850 nm 8 G ROSA with LC housing, with flex NORTH AMERICA: 800 498-JDSU (5378) worldwide: +800 5378-JDSU WEBSITE: www.jdsu.com Product specifications and descriptions in this document subject to change without notice. © 2008 JDS Uniphase Corporation 30149328 000 0308 PL-XXR-00-SH3-C6.DS.CC.AE March 2008