Communications componentS 850 nm 10 G TOSA PL-xxD-00-S40-Cx Key Features •Data rates up to 10 Gbps •-10 °C to 85 °C operation •Optical power monitor with excellent tracking •Multiple pinout options available •VCSEL TO-can aligned to LC or SC optical housing •Optional flex attach to PCBA Benefits •Industry standard housing dimensions •Very high reliability - Low FIT - High MTBF •Excellent performance over extended operational temperatures •Modulation performance verification The JDSU 850 nm 10 Gbps connectorized TOSA product (Transmit Optical SubAssembly) is designed for high-speed data communication applications in 10 Gbps transceiver modules. The product utilizes a high performance, high reliability VCSEL integrated in a custom hermetically sealed TO package aligned to a precision LC or SC housing. The device is configured for differential drive and a controlled impedance flex circuit is available for optimum performance. Each unit receives JDSU’s proprietary burn-in and stabilization process to insure a low failure rate and long life expectancy while providing continuously consistent performance. The PL-xxD-00-S40-Cx converts an electrical signal into optical power at data rates up to 10 Gbps and it is designed for performance over extended operating temperature and power conditions with high reliability. It is perfectly suited for 50/125 mm multimode fiber. Each part is electro-optically tested to exacting standards. NORTH AMERICA: 800 498-JDSU (5378) worldwide: +800 5378-JDSU WEBSITE: www.jdsu.com 850 nm 10 G TOSA TOSA with Flex Dimensions (SC) UNITS: MM .X = 0.2 .XX = 0.10 .XXX = 0.050 1.092 1.035 +0.050 6.731 -0.025 7.264 5X 1 A PIN 3 PIN 2 3.124 PIN 4 4.623±0.025 90°±10° A 1.219 BARREL KEYING FEATURE 10.80 5.74 2.28 +0.38 6.54 - 0.25 OPTICAL REF PLANE PAD 1 PAD 6 6.248 0.13 0.5 0.80 PAD PITCH PIN 5 PIN 1 B 4.840 0.40 6X 1.120 6.121 4X 0.92 12X 0.300 6X 0.46 SECTION A-A C L 4X 0.38 2X 0.710 DETAIL B Pinout PL-FxC-00-S40-C4PL-FxD-00-S40-C5PL-FxA-00-S40-C6 (5-lead TOSA, Anode drive, with flex) (5-lead TOSA, Differential drive, with flex) (5-lead-TOSA, Cathode drive, with flex) Pad Symbol FunctionPad Symbol FunctionPad Symbol Function 1 APD Monitor Anode 1 KPD Monitor Cathode 1 KPD, ALD 2 GND Case/GND 2 GND Case/ GND 2 GND VCSEL Anode 3 ALD VCSEL Anode 3 KLD 3 ALD 4 NC Not Connected 4 KLD VCSEL Cathode 4 NC 5 GND Case/GND 5 GND Case/GND 5 GND 6 KPD Monitor Cathode 6 APD Monitor Anode 6 APD Vcc, Monitor Cathode, VCSEL Anode Case/GND VCSEL Cathode Not Connected Case/GND Monitor Anode 850 nm 10 G TOSA TOSA with Flex Dimensions (LC) UNITS: MM .X = 0.2 .XX = 0.10 .XXX = 0.050 +0.050 4.039- 0.025 2X 5.941 6.599 2.083±0.025 BARREL KEYING FEATURE 1 0.660 A PIN 3 PIN 2 PIN 4 5.080+0.025 - 0.076 PIN 1 0.838±0.025 2.921±0.025 90°±10° PIN 5 A 1.270 10.80 +0.38 6.54 0.25 PAD 6 OPTICAL REF PLANE PAD 1 0.80 PAD PITCH 0.40 45.0°±0.5° 2X 2.28 0.13 0.5 4.039 45.0°±0.5° 4.166 B 4.840 1.12 0.92 0.46 4X 0.38 12X 0.30 2X 0.71 SECTION A-A DETAIL B Pinout PL-FxC-00-S40-C4PL-FxD-00-S40-C5PL-FxA-00-S40-C6 (5-lead TOSA, Anode drive, with flex) (5-lead TOSA, Differential drive, with flex) (5-lead-TOSA, Cathode drive, with flex) Pad Symbol FunctionPad Symbol FunctionPad Symbol Function 1 APD Monitor Anode 1 KPD Monitor Cathode 1 KPD, ALD 2 GND Case/GND 2 GND Case/ GND 2 GND 3 ALD VCSEL Anode 3 ALD VCSEL Anode 3 KLD 4 NC Not Connected 4 KLD VCSEL Cathode 4 NC 5 GND Case/GND 5 GND Case/GND 5 GND 6 KPD Monitor Cathode 6 APD Monitor Anode 6 APD Vcc, Monitor Cathode, VCSEL Anode Case/GND VCSEL Cathode Not Connected Case/GND Monitor Anode 850 nm 10 G TOSA 5-Lead TOSA without Flex Dimensions (LC) UNITS: MM .X = 0.2 .XX = 0.10 .XXX = 0.050 4.039 2.083 ±0.025 +0.050 - 0.025 PIN 5 0.660 0.838 ±0.025 5X 13.460 B 45° ±1° 2X 5.941 5.080 PIN 4 2X 1.397 +0.025 - 0.076 3X B 2.921 ±0.025 6.599 1.270 BARREL KEYING FEATURE +0.38 6.54 - 0.25 4.039 4.166 45° ±1° SECTION B-B Pinout PL-SLD-00-S40-C5 (5-lead-TOSA, Differential drive, no flex) Pad Symbol Function 1 2 3 4 5 ALD KPD APD KLD GND VCSEL Anode Monitor Cathode Monitor Anode VCSEL Cathode Case/GND OPTICAL REF PLANE 2X 57° PIN 1 0.250 2X 82° 0.440 PIN 2 PIN 3 10 MAX ROTATIONAL MISALIGNMENT BETWEEN TO CAN ASSY AND BARREL 2.540 850 nm 10 G TOSA 4-Lead TOSA without Flex Dimensions (SC) UNITS: MM .X = 0.2 .XX = 0.10 .XXX = 0.050 1.092 1.035 7.264 +0.050 6.731 -0.025 4X 13.460 A PIN 4 PIN 3 2X 45° 4.623±0.025 2.540 3.124 BARREL KEYING FEATURE ( 10 MAX ROTATIONAL MISALIGNMENT BETWEEN TO CAN ASSY AND BARREL) 1.219 6.248 6.121 Pinout PL-SxD-00-S40-C2 (4-lead TOSA, no flex) Pin Symbol Function ALD KLD APD KPD VCSEL Anode VCSEL Cathode Monitor Anode Monitor Cathode6 2X 45° PIN 2 PIN 1 5.74 6.55+0.38 - 0.25 OPTICAL REF PLANE 1 2 3 4 A 4X 0.455 850 nm 10 G TOSA 4-Lead TOSA without Flex Dimensions (LC) 01 UNITS: MM P01 INITIAL RELEASE 005827 DWP 21 AUG 06 JD 22 AUG 0 ALIGN NOTCH ROTATED 90º CW; TITLE WAS 10G 006411 DWP 27 SEP 06 SM 28 AUG 0 .X = 0.2 .XX = 0.10 .XXX = 0.050 10 ROTATIONAL MISALIGNMENT BETWEEN TO CAN ASSEMBLY AND BARREL +0.050 4.039 - 0.025 2.083±0.025 13.46±0.76 PIN 3 2X 45° 45.0°±0.5° 5.080 5.941 PIN 4 A 0.838±0.025 +0.025 - 0.076 2.921±0.025 2X 45° A LC BARREL ID 6.599 PIN 2 A PIN 1 0.660 2.540 1.270 ±0.025 6.55 +0.37 - 0.25 4X 0.455 OPTICAL REF PLANE 4.039 Pinout 45.0°±0.5° 4.166 SECTION A-A PL-SxD-00-S40-C2 (4-lead TOSA, no flex) Pin Symbol Function 1 2 3 4 ALD KLD APD KPD VCSEL Anode VCSEL Cathode Monitor Anode Monitor Cathode Absolute Maximum Ratings Parameter Symbol Storage temperature Tst Lead solder temperature Ts Flex attach temperature TF Laser forward current at 85 °C1 I f Laser forward current at 70 °C2 I f Laser reverse voltage BVRLD Photodiode forward current Ifm ESD3 Ratings Unit -40 to +100 °C 260 °C for 10 sec. 2 mm from case 370 °C for 10 sec. 7 mA 8 mA -2 V 2 mA Class 1 Note: Conditions exceeding those listed may cause permanent damage to the device. Devices subjected to conditions beyond the limits specified for extended periods of time may adversely affect reliability. 1. Absolute maximum at 85 °C case operating temperature 2. Absolute maximum at 70 °C case operating temperature 3. HBM 850 nm 10 G TOSA Shipping Information Shipped in anti-static stackable trays. Electro-optical Characteristics Parameter (Tcase = 25 °C , CW operation unless otherwise stated) Symbol Test Condition Min. Typ. Max. Unit VCSEL Peak emission wavelength lp Pout=0.5 mW 840 850 860 nm -10 85 °C Case operating temperature Top RMS spectral width Dl Pout=0.5 mW; 0.4 nm 10.3125Gb/s mod. lp temp coefficient Dlp 0.06 nm/°C Relative intensity noise1 RIN12 10.3125Gb/s mod. 130 dB/Hz Pout=0.5 mW, 45 psec Rise/Fall time tr tf 10.3125Gb/s, 50 20-80%, filtered Threshold current Ith 1 1.3 mA Ith temperature variation DIth T= -10 °C to 85 °C +1.0 +2.0 mA Pout=0.5 mW 2.0 2.4 V Laser forward voltage Vf Series resistance2 R s Pout=0.5 mW 90 100 110 W Series resistance3 R s Pout=0.5 mW 50 60 75 W Coupling efficiency efiber 75 % Slope efficiency4 h Pout=0.5 mW 0.105 0.175 mW/mA Dh/DT -4000 PPM/°C Slope efficiency temperature variation Total capacitance @ VCSEL CLD 6mA bias 0.6 pF Small signal bandwidth Pout=0.5 mW 7.75 GHz Optical return loss -12 dB Monitor Photodiode Photocurrent IPD Pout=0.5 mW 0.12 0.6 mA Vr = 1.5 V Monitor current tracking5 DIm Pout=0.5 mW -0.25 0.25 dB T = -10 °C to 85 °C Vrm = 1.5 V Monitor dark current ID Vr = 1.5 V 500 nA Vrm = 1.5 V 50 pF Monitor capacitance C M 1. Measured according to IEEE802.3 for RIN under Modulation. 2. Applies to PL-SxD-00-S40-C2 and PL-FxD-00-S40-C5 3. Applies to PL-FxC-00-S40-C4 and PL-FxA-00-S40-C6 4. Includes connector repeatability, ferrule concentricity, and diameter (50 mm fiber). 5. For constant monitor current. Does not include the effect of fiber coupling efficiency. 850 nm 10 G TOSA Order Information For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at [email protected]. Sample: PL-SSD-00-S40-C2 10 G, TOSA without Flex Circuit Part Number PL-SSD-00-S40-C2 PL-SLD-00-S40-C2 PL-SLD-00-S40-C5 Description Differential drive TOSA with SC housing, 4 leads Differential drive TOSA with LC housing, 4 leads Differential drive TOSA with LC housing, 5 leads 10 G, 5-lead TOSA with Flex Circuit Part Number PL-FSC-00-S40-C4 PL-FLC-00-S40-C4 PL-FSD-00-S40-C5 PL-FLD-00-S40-C5 PL-FSA-00-S40-C6 PL-FLA-00-S40-C6 Description Anode-drive TOSA with SC housing with flex Anode-drive TOSA with LC housing with flex Differential drive TOSA with SC housing with flex Differential drive TOSA with LC housing with flex Cathode-drive TOSA with SC housing with flex Cathode-drive TOSA with LC housing with flex NORTH AMERICA: 800 498-JDSU (5378) worldwide: +800 5378-JDSU WEBSITE: www.jdsu.com Product specifications and descriptions in this document subject to change without notice. © 2008 JDS Uniphase Corporation 30149334 501 0408 PL-XXD-00-S40-CX.DS.CC.AE April 2008