RWSF Segmented Film Capacitors Series MERITEK PART NUMBERING RWSF 206 - 275 W Meritek Series *RWSF Capacitance CODE 101 102 103 104 ( pF ) 100PF F PF 0PF 105 ( nF ) --- 1 10 100 F ( μF ) --- 0.001Uf 0.01 0.1 1 106 10 Dash Rated Voltage CODE 275 275V CODE W Lead Wire (%) ( VAC ) (μF) Capacitance Tolerance Voltage 20 ±5 275 30 ±5 275 40 ±5 275 Test Voltage ( VDC ) T-T T-C 700 2000 700 2000 D 35.5 45.5 700 45.5 2000 Outline Dimensions/mm L LL Mold 61 100 1-64,FU 77 100 1-57,FU 77 100 1-57,FU SPECIFICATIONS: 1. 2. 3. 4. 5. 6. UL FILE NO: E311150 OPERATING TEMPERATURE: -25 ℃ ~ + 85 ℃. CAPACITANCE RANGE: 20.0, 30.0, 40.0 µF. CAPACITANCE TOLERANCE: J = ± 5% RATED WORKING VOLTAGE RANGE: 275 VAC 50/60 Hz. WITHSTAND VOLTAGE TEST: ( A ): Dielectric strength test ( TV ): rated voltage x 175 % x 1.414 for VDC 1-5 Sec, ( B ): Between Terminals and Case ( TC ): rated voltage x 2 + 1000V ( minimum 2000 V ) for one minute at 25 ℃. 7. DISSIPATION FACTOR (DF): 0.5 % MAX. When measured at 1KHZ, 25 ℃. 8. INSULATION RESISTANCE ( IR ): ( A ) Between Terminals: Above 5000 ΩF, at 100VDC in 25 ℃. ( B ) Between Terminals and Case: Above 10000MΩ, at 500VDC in 25 ℃. 9. PERMISSIBLE OVERLOADS： ( A ) Voltage: At an r.m.s voltage between terminals not exceeding 110﹪the rated voltage. ( B ) Current: At an r.m.s current not exceeding 130﹪the current which occurs at rated sinusoidal voltage and rated frequency excluding transients. Taking into account the tolerance, the maximum permissible current can be up to 130﹪ the rated current increased in proportion to the actual capacitance value compared with the rated capacitance value. 10. LIFE TEST (Continued): Rated voltage X 135%, 1000hours, in the + 85 ℃ chamber. ΔC/C in ± 5 %. DF≤0.5% . 11. Protected –P2 10,000 A. F. C. (Ampere Fault Current) 12. Film: Segmented Metallized Film. Rev.7