RAILWAYS PBSP-110I Series 1 1 0 V D C , 2 5 0 0 W AT T S R A I LW AY D C / A C I N V E R T E R Features • Halogen free low smoke Radox cabling. • ELCB on output, high gauge earthing system. • High temperature operation with derating. • 110Vdc input, 240Vac, 50Hz, 2.5KVA output. Specifications OPERATING INPUT Voltage 96-148Vdc Current 40mA standby, 27A (96Vdc input), 74A max. Under voltage cut-out 96Vdc. Under voltage re-set 106Vdc. Over voltage cut-out 148Vdc. Over voltage re-set Input protection Efficiency 90%–95% load dependent. Isolation Input – Output: 4250VAC Input – Ground: 1700VAC Output – Ground: 2250VAC ENVIRONMENTAL Operating temperature 0°C to 50°C at full load. Derate to 65°C at reduced duty cycle. 145Vdc. Cooling Internal thermostatically controlled fan. Via 10kA MCB as per AS3111. Shock and vibration Unit has been mechanically strengthened. Relative Humidity 95% non-condensing OUTPUT Voltage 240Vac ±5% STANDARDS AND APPROVALS Frequency 50Hz ±5% EMC EN50121-3-2:2000. Total harmonic distortion 3% C-Tick AS/NZS2064:1997 Group 1 Class A Surge power 6.5kVA max. MECHANICAL Output overload and short circuit protection Shutdown, auto restart after 60 secs. Dimensions 490x300x235mm Output protection Via 20A MCB / RCD as per AS3111 / AS3190. Output neutral connected to inverter chassis earth on inverter side of MCB / RCD. Weight 30kgs. Enclosure Powder coated aluminium. Wiring All internal wiring uses Radox 125 halogen free low smoke cable. Mounting Suitable for vertical or horizontal mounting. DC input connector MS3102-E28-22P-F80 Mil grade connector. AC output connector MS3102-R18-10S-F80 Mil grade connector. Over temperature protection Shutdown, auto restart. Please refer to PBSP 740 spec for mechanical drawings. Your dependable power partner – www.powerbox.com.au 397