PBSP-110I Series Features • • • • Halogen free low smoke Radox cabling. ELCB on output, high gauge earthing system. High temperature operation with derating. 110Vdc input, 240Vac, 50Hz, 2.5KVA output. SPECIFICATIONS INPUT OPERATING Voltage 96-148Vdc Efficiency 90%–95% load dependent. Current 40mA standby, 27A (96Vdc input), 74A max. Isolation Under voltage cut-out 96Vdc. Under voltage re-set 106Vdc. Input – Output: 4250VAC Input – Ground: 1700VAC Output – Ground: 2250VAC Over voltage cut-out 148Vdc. Over voltage re-set 145Vdc. Input protection Via 10kA MCB as per AS3111 ENVIRONMENTAL Operating temperature OUTPUT Voltage 240Vac ±5% Frequency 50Hz ±5% Total harmonic distortion 3% Surge power 6.5kVA max. Cooling 0°C to 50°C at full load. Derate to 65°C at reduced duty cycle. Internal thermostatically controlled fan. Shock and vibration Unit has been mechanically strengthened. Relative Humidity 95% non-condensing STANDARDS C-Tick Designed to meet AS/NZS CISPR11: /EN50121-3-2 limits MECHANICAL Output overload and short Shutdown, auto restart after 60 secs. circuit protection Dimensions 490x300x235mm Output protection Weight 30kgs. Enclosure Powder coated aluminium. Wiring All internal wiring uses Radox 125 halogen free low smoke cable. Mounting Suitable for vertical or horizontal mounting. DC input connector MS3102-E28-22P-F80 Mil grade connector. AC output connector MS3102-R18-10S-F80 Mil grade connector. Over temperature protection RAILWAY CONVERTERS 1 1 0 V D C , 2 5 0 0 W AT T S R A I LW AY D C / A C I N V E R T E R Via 20A MCB / RCD as per AS3111 / AS3190. Output neutral connected to inverter chassis earth on inverter side of MCB / RCD. Shutdown, auto restart. Please refer to PBSP 740 spec for mechanical drawings. Doc. No. PBC9 Rev.C 28-4-11 Powering Progress – www.powerbox.com.au 473