STMICROELECTRONICS STPSC806D

STPSC806D
600 V power Schottky silicon carbide diode
Features
■
No or negligible reverse recovery
■
Switching behavior independent of
temperature
■
Particularly suitable in PFC boost diode
function
A
Description
K
The SiC diode is an ultrahigh performance power
Schottky diode. It is manufactured using a silicon
carbide substrate. The wide bandgap material
allows the design of a Schottky diode structure
with a 600 V rating. Due to the Schottky
construction no recovery is shown at turn-off and
ringing patterns are negligible. The minimal
capacitive turn-off behavior is independent of
temperature.
ST SiC diodes will boost the performance of PFC
operations in hard switching conditions.
May 2008
TO-220AC
STPSC806D
Table 1.
Rev 1
Device summary
IF(AV)
8A
VRRM
600 V
Tj (max)
175 °C
QC (typ)
10 nC
1/7
www.st.com
7
Characteristics
1
STPSC806D
Characteristics
Table 2.
Absolute ratings (limiting values at 25 °C unless otherwise specified)
Symbol
Parameter
Value
Unit
VRRM
Repetitive peak reverse voltage
600
V
IF(RMS)
RMS forward current
18
A
Continuous forward current
TC = 115 °C
8
A
IFSM
IF
Surge non repetitive forward current
tp = 10 ms sinusoidal
30
A
IFRM
Repetitive peak forward current
δ = 0.1, TC = 110 °C,
Tj = 150 °C
30
A
Tstg
Storage temperature range
-55 to +175
°C
Operating junction temperature
-40 to +175
°C
Tj
Table 3.
Thermal resistance
Symbol
Rth(j-c)
Table 4.
Symbol
Parameter
Maximum Value
Unit
2.4
°C/W
Junction to case
Static electrical characteristics (per diode)
Parameter
IR (1)
Reverse leakage
current
VF (2)
Forward voltage drop
Tests conditions
Tj = 25 °C
Tj = 150 °C
Tj = 25 °C
Tj = 150 °C
Min.
VR = VRRM
IF = 8 A
Typ
Max.
20
100
150
1000
1.4
1.7
1.6
2.1
Unit
µA
V
1. tp = 10 ms, δ < 2%
2. tp = 500 µs, δ < 2%
To evaluate the conduction losses use the following equation:
P = 1.2 x IF(AV) + 0.113 x IF2(RMS)
Table 5.
Symbol
2/7
Other parameters
Parameter
Test conditions
Typ
Unit
Qc
Total capacitive charge
Vr = 400 V, IF = 8 A dIF/dt = -200 A/µs
Tj = 150 °C
10
nC
C
Total capacitance
Vr = 0 V, Tc = 25 °C, F = 1 Mhz
450
pF
STPSC806D
Figure 1.
Characteristics
Forward voltage drop versus
forward current (typical values)
Figure 2.
IFM(A)
16
1.E+04
Reverse leakage current versus
reverse voltage applied
(maximum values)
IR(µA)
14
Tj=175 °C
1.E+03
12
Tj=25 °C
Tj=150 °C
10
Tj=150 °C
1.E+02
8
Tj=175 °C
1.E+01
6
4
1.E+00
Tj=25 °C
2
VR(V)
VFM(V)
1.E-01
0
0.0
0.5
Figure 3.
1.0
1.5
2.0
2.5
0
3.0
Peak forward current versus case
temperature
Figure 4.
IM(A)
100
150
200
250
300
350
400
450
500
550
600
Junction capacitance versus
reverse voltage applied
(typical values)
C(pF)
70
350
T
δ=0.1
60
50
δ=tp/T
F=1 MHz
VOSC=30 mVRMS
Tj=25 °C
300
tp
50
250
40
200
δ=0.3
30
150
δ=0.5
100
20
δ=1
10
δ=0.7
50
VR(V)
TC(°C)
0
0
0
25
50
75
100
125
150
175
1
10
100
1000
3/7
Characteristics
Figure 5.
1.0
STPSC806D
Relative variation of thermal
impedance junction to case
versus pulse duration
Figure 6.
Non-repetitive peak surge forward
current versus pulse duration
(sinusoidal waveform,
typical values)
IFSM(A)
Zth(j-c)/Rth(j-c)
1.E+03
0.9
0.8
0.7
1.E+02
0.6
Tj=25 °C
0.5
Tj=125 °C
0.4
1.E+01
0.3
0.2
0.1
Single pulse
tp(s)
tp(s)
0.0
1.E-05
Figure 7.
1.E+00
1.E-04
1.E-03
1.E-02
1.E-01
1.E+00
1.E+01
1.E-05
1.E-04
1.E-03
Total capacitive charges versus dIF/dt (typical values)
16
QC(nC)
IF=8A
VR=400 V
Tj=150 °C
14
12
10
8
6
4
2
dIF/dt(A/µs)
0
0
4/7
50
100
150
200
250
300
350
400
450
500
1.E-02
1.E-01
1.E+00
STPSC806D
2
Package information
Package information
●
Epoxy meets UL94, V0
●
Cooling method: C
●
Recommended torque value: 0.4 to 0.6 N·m
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a lead-free second level interconnect. The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at www.st.com.
Table 6.
TO-220AC Dimensions
Dimensions
Ref.
A
H2
ØI
C
L5
Millimeters
Inches
Min.
Max.
Min.
Max.
A
4.40
4.60
0.173
0.181
C
1.23
1.32
0.048
0.051
D
2.40
2.72
0.094
0.107
E
0.49
0.70
0.019
0.027
F
0.61
0.88
0.024
0.034
F1
1.14
1.70
0.044
0.066
G
4.95
5.15
0.194
0.202
H2
10.00
10.40
0.393
0.409
L7
L6
L2
F1
D
L9
L2
L4
16.40 typ.
0.645 typ.
L4
13.00
14.00
0.511
0.551
L5
2.65
2.95
0.104
0.116
L6
15.25
15.75
0.600
0.620
L7
6.20
6.60
0.244
0.259
L9
3.50
3.93
0.137
0.154
F
M
E
G
M
Diam. I
2.6 typ.
3.75
3.85
0.102 typ.
0.147
0.151
5/7
Ordering information
3
Ordering information
Table 7.
4
Ordering information
Ordering type
Marking
Package
Weight
Base qty
Delivery mode
STPSC806D
STPSC806D
TO-220AC
1.86 g
50
Tube
Revision history
Table 8.
6/7
STPSC806D
Document revision history
Date
Revision
05-May-2008
1
Description of Changes
First issue
STPSC806D
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2008 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
7/7