IMS-2WWD-40 Vishay Dale Inductors, Subminiature, Shielded Subminiature, Shielded FEATURES • Classification is Grade 2, Class B • Inductance range is 0.10 µH to 1000 µH RoHS • High inductance-to-size ratio STANDARD ELECTRICAL SPECIFICATIONS FERRITE IRON PHENOLIC IND. Q TEST SRF DCR RATED INCR.* MODEL TOL. DC CURRENT (µH) MIN. FREQ. MIN. MAX. (MHz) (MHz) (Ohms) CURRE (mA) IMS-2WWD-40 0.10 ± 10 % 42 25 > 400 0.112 1720 > 1720 IMS-2WWD-40 0.12 ± 10 % 42 25 > 400 0.126 1630 > 1630 IMS-2WWD-40 0.15 ± 10 % 42 25 > 400 0.138 1550 > 1550 IMS-2WWD-40 0.18 ± 10 % 42 25 366 0.165 1420 > 1420 IMS-2WWD-40 0.22 ± 10 % 42 25 331 0.198 1330 > 1330 IMS-2WWD-40 0.27 ± 10 % 42 25 298 0.220 1230 > 1230 IMS-2WWD-40 0.33 ± 10 % 42 25 288 0.258 1140 > 1140 IMS-2WWD-40 0.39 ± 10 % 42 25 271 0.292 1060 > 1060 IMS-2WWD-40 0.47 ± 10 % 41 25 247 0.360 960 > 960 IMS-2WWD-40 0.56 ± 10 % 39 25 236 0.397 915 > 915 IMS-2WWD-40 0.68 ± 10 % 36 25 216 0.472 840 > 840 IMS-2WWD-40 0.82 ± 10 % 35 25 200 0.638 720 > 720 IMS-2WWD-40 1.0 ± 10 % 42 25 136 0.208 1260 > 1260 IMS-2WWD-40 1.2 ± 10 % 38 7.9 120 0.225 1210 > 1210 IMS-2WWD-40 1.5 ± 10 % 38 7.9 111 0.265 1120 > 1120 IMS-2WWD-40 1.8 ± 10 % 38 7.9 103 0.285 1080 > 1080 IMS-2WWD-40 2.2 ± 10 % 36 7.9 94 0.330 1000 > 1000 IMS-2WWD-40 2.7 ± 10 % 38 7.9 85 0.381 935 > 935 IMS-2WWD-40 3.3 ± 10 % 38 7.9 78 0.432 875 > 875 IMS-2WWD-40 3.9 ± 10 % 40 7.9 73 0.576 755 > 755 IMS-2WWD-40 4.7 ± 10 % 42 7.9 66 0.787 650 > 650 IMS-2WWD-40 5.6 ± 10 % 42 7.9 62 1.04 565 > 565 IMS-2WWD-40 6.8 ± 10 % 45 7.9 54 1.40 485 > 485 IMS-2WWD-40 8.2 ± 10 % 47 7.9 50 1.68 440 > 440 IMS-2WWD-40 10 ± 10 % 51 7.9 44 2.58 355 > 355 IMS-2WWD-40 12 ± 10 % 51 2.5 39 3.65 300 > 300 IMS-2WWD-40 15 ± 10 % 45 2.5 44 0.862 620 200 IMS-2WWD-40 18 ± 10 % 43 2.5 40 1.02 570 175 IMS-2WWD-40 22 ± 10 % 42 2.5 36 1.12 545 160 IMS-2WWD-40 27 ± 10 % 37 2.5 33 1.28 510 155 IMS-2WWD-40 33 ± 10 % 46 2.5 30 1.70 440 150 IMS-2WWD-40 39 ± 10 % 38 2.5 26 1.99 405 145 IMS-2WWD-40 47 ± 10 % 42 2.5 23 2.41 370 140 IMS-2WWD-40 56 ± 10 % 41 2.5 22 2.85 340 130 IMS-2WWD-40 68 ± 10 % 46 2.5 18 3.21 320 120 IMS-2WWD-40 82 ± 10 % 46 2.5 17 3.57 305 115 IMS-2WWD-40 100 ± 10 % 43 2.5 15 4.10 280 100 IMS-2WWD-40 120 ± 10 % 50 0.79 13 5.97 235 80 IMS-2WWD-40 150 ± 10 % 49 0.79 12 7.05 215 68 IMS-2WWD-40 180 ± 10 % 56 0.79 11 8.12 200 64 IMS-2WWD-40 220 ± 10 % 53 0.79 10 14.8 150 60 IMS-2WWD-40 270 ± 10 % 57 0.79 9 16.8 140 58 IMS-2WWD-40 330 ± 10 % 57 0.79 8.5 18.6 130 56 IMS-2WWD-40 390 ± 10 % 57 0.79 8 21.1 120 54 IMS-2WWD-40 470 ± 10 % 50 0.79 7 32.2 100 52 IMS-2WWD-40 560 ± 10 % 50 0.79 6 36.4 95 50 IMS-2WWD-40 680 ± 10 % 56 0.79 5.5 41.1 90 48 IMS-2WWD-40 820 ± 10 % 49 0.79 5 45.0 85 47 IMS-2WWD-40 1000 ± 10 % 49 0.79 4.5 52.0 80 45 * Incremental Current: The DC current required to cause a 5 % reduction in the nominal inductance value. Document Number: 34047 Revision: 10-Aug-06 COMPLIANT • 0.133" [3.38 mm] diameter by 0.335" [8.51 mm] length • Subminiature shielded inductor • Solves special problems in density circuit application ELECTRICAL SPECIFICATIONS Inductance Tolerance: ± 10 % on Q-Meter Dielectric Strength: 700 VRMS at sea level Operating Temperature: - 55 °C to + 125 °C Self-Resonant Frequency: Minimum SRF measured with full length leads on Grid-Dip Meter Rating: Maximum current based on 1/3 watt dissipation MECHANICAL SPECIFICATIONS Terminal Strength: Meets 5 pound pull test DENSITY SPECIFICATIONS Weight: 0.50 gram maximum Shielding: Less than 3 % coupling with two units mounted side by side at 1000 cycles DIMENSIONS in inches [millimeters] 1.30 [33.02] Typ. Min. # 24 0.020 ± 0.002 [0.508 ± 0.051] TCW 0.335 [8.51] Max. 0.133 [3.38] Max. MARKING - Color coded For technical questions contact [email protected] www.vishay.com 21 IMS-2WWD-40 Inductors, Subminiature, Shielded, Vishay Dale ORDERING INFORMATION IMS-2WWD-40 0.10 µH 10 % ER e2 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I M S 0 2 MODEL www.vishay.com 22 W W D E R PACKAGE CODE R 1 0 INDUCTANCE VALUE For technical questions contact [email protected] K INDUCTANCE TOLERANCE 4 0 SERIES Document Number: 34047 Revision: 10-Aug-06 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1