05026 60KS200C & 90KS200C Only One Name Means ProTek’Tion™ SHIPBOARD/AC POWER BUS VOLTAGE SUPPRESSOR APPLICATIONS 60,000 WATTS ✔ AC Power Protection ✔ Shipboard (Line-Line) Protection ✔ Differential AC Power Bus ✔ Aircraft AC Power Bus FEATURES ✔ Meets the Following Military Specifications: - DOD-STD-1399 - MIL-STD-704A ✔ 60 & 90 kilowatts Peak Pulse Power per Line (tp=1.2/50µs) ✔ Each Device 100% Tested ✔ 200 Volts Bidirectional 60KS200C 90,000 WATTS MECHANICAL CHARACTERISTICS ✔ Hermetically Sealed Glass to Metal Sub-Assemblies ✔ Weight 50 grams (Approximate) ✔ Flammability rating UL 94V-0 ✔ Device Marking: Logo & Part Number ✔ Screening Available Upon Request - The 60 & 90KS series can be screened upon request for military requirements in accordance with MIL-PRF-19500 (applicable test). Standard screening is available based on the following options: H1 - Submodule Screening per test plans 05231 & 05232 H2 - Submodule & Module Screening per test plan 05233 H3 - Submodule & Module Screening, Module Group B & C Lot Testing per test plans 05234 & 05235 90KS200C MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS Peak Pulse Power (tp = 1.2/50µs) - See Figure 1 PPP 60 & 90 kilowatts Operating Temperature TJ -55°C to 150°C °C TSTG -55°C to 150°C °C TA 10.0 Watts PARAMETER Storage Temperature Steady State Power Dissipation @ 50°C 05026.R5 11/04 1 www.protekdevices.com 60KS200C & 90KS200C DEVICE CHARACTERISTICS ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER 60KS200C 90KS200C RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM LEAKAGE CURRENT VWM VOLTS @ 1mA V(BR) VOLTS @ IPP VC VOLTS @VWM ID µA IPPM AMPS 180 180 200 200 335 280 10 0.5 180 180 MAXIMUM PEAK PULSE CURRENT (See Fig. 2) FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Power - kilowatts 1,000 90kW 1.2/50µs Waveform 100 60kW 1.2/50µs Waveform 10 1 0.1 10 100 td - Pulse Duration - µs 1,000 FIGURE 2 PULSE WAVE FORM 100 10,000 FIGURE 3 POWER DERATING CURVE 100 TEST WAVEFORM PARAMETERS tf = 1.2µs td = 50µs tf Peak Value IPP Peak Pulse Power 1.2/50µs 80 % Of Rated Power IPP - Peak Pulse Current - % of IPP 1 td = t I /2 PP 50 60 40 20 Average Power e-t 0 0 0 0 50 100 150 25 50 75 100 125 TL - Lead Temperature - °C 150 t - Time - µs 05026.R5 11/04 2 www.protekdevices.com 60KS200C & 90KS200C PACKAGE OUTLINE & DIMENSIONS 60KS200C PACKAGE OUTLINE 60KS200C A C B DIMENSIONS H D G E DIM A B C D* E F* G H I* J F J I 90KS200C PACKAGE OUTLINE MILLIMETERS MIN MAX 56.38 49.02 3.43 20.32 8.26 3.18 DIA 16.76 34.16 6.35 11.94 57.91 50.03 4.17 20.32 9.27 3.18 DIA 18.29 35.69 6.35 13.46 INCHES MIN MAX 2.28 2.22 1.93 1.97 0.165 0.135 0.800 0.800 0.325 0.365 0.125 DIA 0.125 DIA 0.660 0.720 1.405 1.345 0.250 0.250 0.470 0.530 90KS200C A C B D DIMENSIONS H G E DIM A B C D E F G H I J F J I Outline & Dimensions: Rev 0 - 4/02, 06033 COPYRIGHT © ProTek Devices 2004 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05026.R5 11/04 3 MILLIMETERS MIN MAX 47.75 6.10 24.89 4.90 DIA 22.66 45.34 6.48 - 63.50 48.77 6.60 25.91 10.16 5.21 DIA 23.06 46.10 7.49 13.97 INCHES MIN MAX 2.50 1.880 1.920 0.240 0.260 0.980 1.020 0.400 0.193 DIA 0.205 DIA 0.892 0.908 1.785 1.815 0.255 0.295 0.550 Note*: Dimensions are nominal. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com www.protekdevices.com