05062 VSB06P05LCI thru Only One Name Means ProTek’Tion™ VSB06P12LCI LOW CAPACITANCE TVS ARRAY APPLICATIONS ✔ RS-232 and RS-423 Data Lines ✔ T1/E1 & T3/E3 ✔ ATM Circuit Interfaces ✔ ADSL/HDSL & ISDN Interfaces ✔ V.34/V.90 ✔ Cable Modem Intra-Structure Protection IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 8/20µs - 95A, L4(Line-Gnd) & 48A, L4(Line-Line) & 83A, L2(Power) VSIP® FEATURES ✔ 600 Watts Peak Pulse Power per Line (tp=10/1000µs) ✔ 100A (2/10µs) per Bellcore GR-1089 (Intra-Building) ✔ Isolated VSIP® Technology ✔ ESD Protection > 40 kilovolts ✔ High Surge Capability ✔ Lead Spacing of 0.100” ✔ Available in 3 Voltages: 5V, 6.5V & 12V ✔ LOW CAPACITANCE: < 50pF MECHANICAL CHARACTERISTICS ✔ Molded Plastic VSIP® Package ✔ Weight 1.5 grams (Approximate) ✔ Flammability Rating UL 94V-0 ✔ Marking: Logo, Part Number, Date Code & Pin One Defined By Dot on Top of Package PIN CONFIGURATION 05062.R3 8/03 1 www.protekdevices.com VSB06P05LCI thru VSB06P12LCI DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS Peak Pulse Power (tp =10/1000µs) - See Figure 1 PPP 600 Watts Operating Temperature TJ -55°C to 150°C °C TSTG -55°C to 150°C °C PARAMETER Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (See Note 1) VSB06P05LCI VSB06P6.5LCI VSB06P12LCI DEVICE MARKING VSB06P05LCI VSB06P6.5LCI VSB06P12LCI RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM LEAKAGE CURRENT MAXIMUM CAPACITANCE @ 1mA V(BR) VOLTS @ IP = 10A VC VOLTS @10/1000µs VWM VOLTS VC @ IPP @VWM ID µA 0V @ 1 MHz C pF 5 6.5 12 6.0 7.2 13.3 12.5 11.6 18.8 16.5V @ 36.0A 15.6V @ 38.0A 22.8V @ 26.0A 300 300 2 50 50 50 Note 1: Do not surge from pins 2 to 1, 1 to 3 or 4 to 6, 6 to 5. PIV typically greater than 100 volts for each rectifier diode. For circuit applications external pins 2 & 3 and 4 & 5 are connected. 05062.R3 8/03 2 www.protekdevices.com VSB06P05LCI thru VSB06P12LCI GRAPHS FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Power - kW 100 10 600W 10/1000µs Waveform 1 0.1 0.1 10 100 1,000 td - Pulse Duration - µs 10,000 FIGURE 2 PULSE WAVE FORM 100 100,000 FIGURE 3 POWER DERATING CURVE 100 tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 10µs td = 1,000µs Peak Pulse Power 10/1000µs 80 % Of Rated Power IPP - Peak Pulse Current - % of IPP 1 td = t I /2 PP 50 60 40 20 Average Power e-t 0 0 0 0 1 2 3 25 50 75 100 125 TL - Lead Temperature - °C 150 t - Time - µs 05062.R3 8/03 3 www.protekdevices.com VSB06P05LCI thru VSB06P12LCI PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE 6 PIN VSIP PACKAGE I K J L H VSIP DIMENSIONS C B DIM A B C D E F G H I J K L D E A F G MILLIMETERS MIN MAX 25.81 6.25 5.92 0.406 1.47 2.49 0.38 3.20 7° TYP 1.47 0.20 1.47 26.01 6.45 6.02 0.508 1.57 2.59 1.02 3.40 7° TYP 1.57 0.30 1.57 INCHES MIN MAX 1.016 0.246 0.233 0.016 0.058 0.098 0.015 0.126 7° TYP 0.058 0.008 0.058 1.024 0.254 0.237 0.020 0.062 0.102 0.040 0.134 7° TYP 0.062 0.012 0.062 NOTES 1. Dimensions are exclusive of mold flash and metal burrs. BULK ORDERING NOMENCLATURE 1. Product Shipped in Tubes of 18 pcs per Tube. Outline & Dimensions: Rev 1 - 11/01, 06016 COPYRIGHT © ProTek Devices 2005 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05062.R3 8/03 4 ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com www.protekdevices.com