05062 VSB06P05LCI thru VSB06P12LCI . . . engineered solutions for the transient environment™ LOW CAPACITANCE ISOLATED VSIP® TVS DIODE ARRAY APPLICATIONS ✔ RS-232, and RS-423 Data Lines ✔ T1/E1 & T3/E3 ✔ ATM Circuit Interface ✔ ADSL/HDSL & ISDN Interface ✔ V.34/V.90 ✔ Cable Modem Intra-Structure Protection VSIP® PACKAGE IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line-Gnd) & Level 3(Line-Line) FEATURES ✔ 600 Watts Peak Pulse Power per Line (tp = 10/1000 µs) ✔ Lead Spacing of 0.100 inches ✔ ESD Protection > 40 kilovolts ✔ High Surge Capability ✔ Low Capacitance < 50 pF ✔ Available in 3 Voltage Types Ranging from 5.0V to 12V MECHANICAL CHARACTERISTICS ✔ Molded Plastic Package ✔ Weight 1.5 grams (Approximate) ✔ Flammability Rating UL 94V-0 ✔ Device Marking: Part Number & Logo ✔ Pin 1 Indicated By DOT on Package CIRCUIT DIAGRAMS 8 PIN VSIP PACKAGE 05062.R2 6/02 10 PIN VSIP PACKAGE 1 www.protekdevices.com VSB06P05LCI thru VSB06P12LCI DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS Peak Pulse Power (tp =10/1000µs) - See Figure 1 PPP 600 Watts Operating Temperature TJ -55°C to 150°C °C TSTG -55°C to 150°C °C PARAMETER Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (See Note 1) DEVICE MARKING VSB06P05LCI VSB06P05LCI VSB06P6.5LCI VSB06P6.5LCI VSB06P12LCI VSB06P12LCI Note 1: RATED STAND-OFF VOLTAGE (See Note 2) MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM LEAKAGE CURRENT MAXIMUM CAPACITANCE @ 1mA V(BR) VOLTS @ IP = 10A VC VOLTS @10/1000µs VWM VOLTS VC @ IPP @VWM ID µA 0V @ 1 MHz C pF 5 6.5 12 6.0 7.2 13.3 12.5 11.6 18.8 16.5 @ 36 15.6 @ 38 22.8 @ 26 300 300 2 50 50 50 Do not surge from pins 2 to 1, 1 to 3 or 4 to 6, 6 to 5. PIV typically greater than 100 volts for each rectifier diode. 05062.R2 6/02 2 www.protekdevices.com VSB06P05LCI thru VSB06P12LCI GRAPHS FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Power - Watts 100 10 600W 10/1000µs Waveform 1 .1 0.01 1 10 10,000 100,000 FIGURE 2 PULSE WAVE FORM 120 IPP - Peak Pulse Current - % of IPP 100 1,000 td - Pulse Duration - µs tf 100 TEST WAVEFORM PARAMETERS tf = 10µs td = 1000µs Peak Value IPP 80 e-t 60 40 td = t IPP/2 20 0 0 5 10 15 t - Time - µs 25 30 FIGURE 3 POWER DERATING CURVE 100 Peak Pulse Power 10/1000µs 80 % Of Rated Power 20 60 40 20 Average Power 0 0 05062.R2 6/02 25 50 75 100 125 TL - Lead Temperature - °C 3 150 www.protekdevices.com VSB06P05LCI thru VSB06P12LCI PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE K VSIP PACKAGE I J L H VSIP DIMENSIONS C DIM B A B C D E F G H I J K L D E A F G MILLIMETERS MIN MAX 25.81 6.25 5.92 0.406 1.47 2.49 0.38 3.20 7° TYP 1.47 0.20 1.47 26.01 6.45 6.02 0.508 1.57 2.59 1.02 3.40 7° TYP 1.57 0.30 1.57 INCHES MIN MAX 1.016 0.246 0.233 0.016 0.058 0.098 0.015 0.126 7° TYP 0.058 0.008 0.058 1.024 0.254 0.237 0.020 0.062 0.102 0.040 0.134 7° TYP 0.062 0.012 0.062 NOTES: 1. Dimensions are exclusive of mold flash and metal burrs. 06016 Rev 1 - 11/01 PACKAGING: Product Shipped in Tubes of 18 pcs per Tube Protek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com COPYRIGHT © ProTek Devices 2001 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05062.R2 6/02 4 www.protekdevices.com