MICREL SY100S341FC

8-BIT SHIFT
REGISTER
Micrel, Inc.
FEATURES
■
■
■
■
■
■
■
■
■
■
SY100S341
SY100S341
DESCRIPTION
The SY100S341 offer eight D-type, edge-triggered flipflops with both individual inputs for parallel operation as
well as serial inputs for bidirectional shifting, and are
designed for use in high-performance ECL systems. Data
is clocked into the flip-flops on the rising edge of the clock.
The mode of operation is selected by two Select inputs
(S0, S1) which determine if the device performs a shift, hold
or parallel entry function, as described in the Truth Table.
The inputs on these devices have 75KΩ pull-down resistors.
Max. shift frequency of 600MHz
Max. Clock to Q delay of 1200ps
IEE min. of –150mA
Industry standard 100K ECL levels
Extended supply voltage option:
VEE = –4.2V to –5.5V
Voltage and temperature compensation for improved
noise immunity
Internal 75KΩ input pull-down resistors
70% faster than Fairchild 300K at lower power
Function and pinout compatible with Fairchild F100K
Available in 24-pin CERPACK and 28-pin PLCC
packages
PIN NAMES
Label
Function
CP
Clock Pulse Input
S0 — S1
Select Inputs
D0 — D7
Serial Inputs
P0 — P7
Parallel Inputs
Q0 — Q7
Data Outputs
VEES
VEE Substrate
VCCA
VCCO for ECL Outputs
M9999-032206
[email protected] or (408) 955-1690
Rev.: H
1
Amendment: /0
Issue Date: March 2006
SY100S341
Micrel, Inc.
Ordering Information
D7
Q7
Q6
P6
P7
VEES
P5
PACKAGE/ORDERING INFORMATION
Part Number
11 10 9 8 7 6 5
Package
Type
Operating
Range
Package
Marking
Lead
Finish
P4
CP
12
4
Q5
13
SY100S341FC
F24-1
Commercial
SY100S341FC
Sn-Pb
VEE
VEES
S0
14
3
2
1
Q4
VCCA
SY100S341FCTR(1)
F24-1
Commercial
SY100S341FC
Sn-Pb
VCC
VCC
SY100S341JC
J28-1
Commercial
SY100S341JC
Sn-Pb
Q3
SY100S341JCTR(1)
J28-1
Commercial
SY100S341JC
Sn-Pb
Q2
SY100S341JZ(2)
J28-1
Commercial
SY100S341JZ with
Pb-Free bar-line indicator
Matte-Sn
SY100S341JZTR(1, 2)
J28-1
Commercial
SY100S341JZ with
Pb-Free bar-line indicator
Matte-Sn
S1
P3
Top View
PLCC
J28-1
15
16
17
28
27
26
18
Q1
D0
Q0
VEES
P2
P1
P0
19 20 21 22 23 24 25
Notes:
P1
P0
D0
2
3
4
5
Q1
6
CP
P4
24 23 22 21 20 19
18
P5
17
16
P6
P7
15
14
D7
Q7
13
7 8 9 10 11 12
Q8
Top View
Flatpack
F24-1
Q2
Q0
1. Tape and Reel.
2. Pb-Free package is recommended for new designs.
Q4
Q5
1
Q3
VCC
VCCA
P2
S1
S0
VEE
P3
28-Pin PLCC (J28-1)
24-Pin Cerpack (F24-1)
M9999-032206
[email protected] or (408) 955-1690
2
SY100S341
Micrel, Inc.
BLOCK DIAGRAM
D7
Q7
D Q
C
P7
Q6
Q
D
C
P6
Q1
Q
D
C
P1
PARALLEL
LOAD
Q0
SHIFT
LEFT
Q
D
SHIFT
RIGHT HOLD
C
P0
DECODE
S0 S1
M9999-032206
[email protected] or (408) 955-1690
D0
CP
3
SY100S341
Micrel, Inc.
TRUTH TABLE
Inputs
Function
Outputs
D7
D0
S1
S0
CP
Q7
Q6
Q5
Q4
Q3
Q2
Q1
Q0
Load Register
X
X
L
L
u
P7
P6
P5
P4
P3
P2
P1
P0
Shift Left
Shift Left
X
X
L
H
L
L
H
H
u
u
Q6
Q6
Q5
Q5
Q4
Q4
Q3
Q3
Q2
Q2
Q1
Q1
Q0
Q0
L
H
Shift Right
Shift Right
L
H
X
X
H
H
L
L
u
u
L
H
Q7
Q7
Q6
Q6
Q5
Q5
Q4
Q4
Q3
Q3
Q2
Q2
Q1
Q1
Hold
Hold
Hold
X
X
X
X
X
X
H
X
X
H
X
X
X
H
L
No Change
NOTE:
1. H = HIGH Voltage Level
L = LOW Voltage Level
X = Don't Care
u = LOW-to-HIGH Transition
DC ELECTRICAL CHARACTERISTICS
VEE = –4.2V to –5.5V unless otherwise specified; VCC = VCCA = GND
Symbol
Parameter
IIH
Input HIGH Current, All Inputs
IEE
Power Supply Current
Min.
Typ.
Max.
Unit
Condition
—
—
200
µA
VIN = VIH (Max.)
–150
–102
–71
mA
Inputs Open
AC ELECTRICAL CHARACTERISTICS
CERPACK
VEE = –4.2V to –5.5V unless otherwise specified; VCC = VCCA = GND
TA = 0°C
Symbol
Parameter
TA = +25°C
TA = +85°C
Min.
Max.
Min.
Max.
Min.
Max.
Unit
fshift
Shift Frequency
600
—
600
—
600
—
MHz
tPLH
tPHL
Propagation Delay
CP to Output
450
1200
450
1200
450
1200
ps
tTLH
tTHL
Transition Time
20% to 80%, 80% to 20%
300
900
300
900
300
900
ps
tS
Set-up Time
Dn, Pn
Sn
300
600
—
—
300
600
—
—
300
600
—
—
Hold Time
Dn, Pn
Sn
300
0
—
—
300
0
—
—
300
0
—
—
—
600
—
600
—
600
tH
tpw (H)
Pulse Width HIGH, CP
M9999-032206
[email protected] or (408) 955-1690
ps
ps
4
ps
Condition
SY100S341
Micrel, Inc.
AC ELECTRICAL CHARACTERISTICS
PLCC
VEE = –4.2V to –5.5V unless otherwise specified; VCC = VCCA = GND
TA = 0°C
Symbol
Parameter
TA = +25°C
TA = +85°C
Min.
Max.
Min.
Max.
Min.
Max.
Unit
fshift
Shift Frequency
600
—
600
—
600
—
MHz
tPLH
tPHL
Propagation Delay
CP to Output
450
1200
450
1200
450
1200
ps
tTLH
tTHL
Transition Time
20% to 80%, 80% to 20%
300
900
300
900
300
900
ps
tS
Set-up Time
Dn, Pn
Sn
300
600
—
—
300
600
—
—
300
600
—
—
Hold Time
Dn, Pn
Sn
300
0
—
—
300
0
—
—
300
0
—
—
—
600
—
600
—
600
tH
tpw (H)
ps
ps
Pulse Width HIGH, CP
TIMING DIAGRAMS
0.7 ± 0.1 ns
0.7 ± 0.1 ns
–0.95V
80%
50%
20%
CLOCK
–1.69V
tpw (H)
1/fshift
–0.95V
PARALLEL
–1.69V
tPLH
tPHL
OUTPUT
tTLH
tTHL
Propagation Delay and Transition Times
M9999-032206
[email protected] or (408) 955-1690
5
ps
Condition
SY100S341
Micrel, Inc.
TIMING DIAGRAMS
–0.95V
Pn, Sn, Dn
50%
–1.69V
tH
tS
–0.95V
CLOCK
50%
–1.69V
Set-up and Hold Times
Notes:
1. VEE = –4.2V to –5.5V unless otherwise specified; VCC = VCCA = GND.
2. tS is the minimum time before the transition of the clock that information must be present at the data input.
3. tH is the minimum time after the transition of the clock that information must remain unchanged at the data input.
M9999-032206
[email protected] or (408) 955-1690
6
SY100S341
Micrel, Inc.
24-PIN CERPACK (F24-1)
Rev. 03
M9999-032206
[email protected] or (408) 955-1690
7
SY100S341
Micrel, Inc.
28-PIN PLCC (J28-1)
Rev. 03
MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131
TEL
+ 1 (408) 944-0800
FAX
+ 1 (408) 474-1000
WEB
USA
http://www.micrel.com
The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use.
Micrel reserves the right to change circuitry and specifications at any time without notification to the customer.
Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can
reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into
the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s
use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify
Micrel for any damages resulting from such use or sale.
© 2006 Micrel, Incorporated.
M9999-032206
[email protected] or (408) 955-1690
8