Order this document by MC13751/D MC13751 Dual-Band Upmixer and Driver Amplifier DUAL–BAND UPMIXER AND DRIVER AMPLIFIER The MC13751 is an integrated transmit upmixer and driver amplifier designed for use in cellular phones. It includes two mixers and two RF step attenuators. The device is fabricated using Motorola’s Advanced RF BiCMOS process with the SiGe:C option and is housed in a leadless QFN–24 package. • • • SEMICONDUCTOR TECHNICAL DATA Total Gain: 22 dB for Low Band 19.5 dB for High Band Total Current Consumption = 53 mA (Typ) Available in Tape and Reel, 2500 Units per 12 mm, 7 inch Reel (Scale 2:1) PLASTIC PACKAGE CASE 1307 (QFN–24, Tape and Reel Only) ORDERING INFORMATION Device MC13751FCR2 Device Marking Package MC751 QFN–24 Simplified Block Diagram High Band High Band Mix Out DRV In High Band IF+ High Band IF- High Band RF Out LO+ LO- Gain Control Low Band IF+ Low Band IF- Low Band RF Out Low Band Low Band Mix Out DRV In Band Select Enable This device contains 223 active transistors. Definitive Data – Motorola reserves the right to change the Production detail specifications as may be required to permit improvement in the design of its products. MOTOROLA RF PRODUCTS DEVICE DATA Motorola, Inc. 2002 Rev. 1 1 MC13751 CONTACT CONNECTIONS VCC MixOut High High Gain DRV In Gnd Band Band Gnd Control High Band 24 23 22 21 20 19 IF+ High Band 18 Gnd 1 17 RF Out High Band IF- High Band 2 16 Enable LO+ 3 LO- 4 15 Band Select IF- Low Band 5 14 RF Out Low Band IF+ Low Band 6 13 Gnd 7 Gnd 8 9 10 VCC MixOut Gnd Low Low Band Band 11 12 Gnd DRV In Low Band MAXIMUM RATINGS Symbol Value Unit VCC 3.6 V LO Input Power 0 dBm IF Input Level 0 dBm –30 to 85 °C Rating Supply Voltage Operating Temperature Range TA NOTES: 1. Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the limits in the Electrical Characteristics tables. 2. ESD (electrostatic discharge) immunity meets Human Body Model (HBM) ≤250 V and Machine Model (MM) ≤25 V. Additional ESD data available upon request. DC ELECTRICAL CHARACTERISTICS Characteristic Min Typ Max Unit 2.7 2.78 2.86 V – 53 64 mA Enable Inactive State Active State – 1.6 – – 0.6 – Band 800 MHz Enabled 1900 MHz Enabled – 1.6 – – 0.6 – – – 25 1.6 – – – – 0.6 – – 10 Supply Voltage Power Supply Current Power Down State Leakage Current (0.2 V Logic Levels) Gain Select Voltage Gain High = 1 Gain Low = 0 Gain Select (enable and band signals current) 2 Symbol V V µA V µA MOTOROLA RF PRODUCTS DEVICE DATA MC13751 ELECTRICAL CHARACTERISTICS Characteristic Conditions Symbol Min Typ Max Unit IF Frequency Low Band High Band 150 150 178 213 250 250 LO Frequency Range Low Band High Band 1002 2028 – – 1029 2125 RF Frequency Range Low Band High Band 824 1850 – – 849 1910 IF Input Level, Both Bands (differential, typ –7.0 dBm) –60 – 0 dBm LO Input Level, Both Bands (differential) –12 –10 –8.0 dBm RF GMSK Output Level Both Bands Both Bands, Low Gain 10 6.0 – – – – RF Linear Output Level, TDMA Both Bands Both Bands, Low Gain 6.0 2.0 – – – – ACP @ f ±30 kHz, TDMA @ f ±60 kHz, TDMA @ f ±200 kHz, GSM @ f ±400 kHz, GSM –32 –51 –36 –66 – – – – – – – – Conversion Gain Mixer Low Band High Band 6.3 6.5 8.3 8.5 10.3 10.5 Gain, Driver, High Gain Low Band High Band 11.7 9.0 13.7 11 15.7 13 Gain, Drivers, Low Gain Low Band High Band 7.7 5.0 9.7 7.0 11.7 9.0 Noise Figure Mixer (SSB) Drivers – – 11 5.0 14 8.0 IF Impedance (differential) – 200 – Ω LO Impedance (differential) – 100 – Ω RF Impedance (Both Bands @ Mixer (rf out, driver rf in and driver rf out)) – 50 – Ω Min Typ Max Unit LO Leakage to RF Port (Both bands, Pout = 6.0 dBm) – – –20 dBc IF Leakage to RF Port (Both bands) – – –50 dBc Image Supression (Both bands) – – –20 dBc 2x Image Supression (Both bands) – – –40 dBc LO – 2x IF (Both bands) – – –30 dBc 2x LO – 7x IF (Low band) – – –40 dBc 5 * IF (Low band) – – –80 dBc 11 * IF (Low band) – – –80 dBc MHz MHz MHz dBm dBm dBc dBc dBc dBc dB SPURIOUS (measured with interstage filter) Characteristic MOTOROLA RF PRODUCTS DEVICE DATA Symbol 3 MC13751 OUTLINE DIMENSIONS PLASTIC PACKAGE CASE 1307–01 (QFN–24) ISSUE B PIN 1 INDEX AREA 0.1 C M 2X 4 A 0.1 C 0.1 C G 2X 1.0 1.00 0.8 0.75 4 0.05 0.00 DETAIL G NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS. 2. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. 3. THE COMPLETE JEDEC DESIGNATOR FOR THIS PACKAGE IS: HF-PQFP-N. 4. CORNER CHAMFER MAY NOT BE PRESENT. DIMENSIONS OF OPTIONAL FEATURES ARE FOR REFERENCE ONLY. 5. CORNER LEADS CAN BE USED FOR THERMAL OR GROUND AND ARE TIED TO THE DIE ATTACH PAD. THESE LEADS ARE NOT INCLUDED IN THE LEAD COUNT. 6. COPLANARITY APPLIES TO LEADS, CORNER LEADS, AND DIE ATTACH PAD. 7. FOR ANVIL SINGULATED QFN PACKAGES, MAXIMUM DRAFT ANGLE IS 12°. EXPOSED DIE ATTACH PAD 24 18 1 13 6 2.25 1.95 0.1 C A B N 12 0.5 0.3 SEATING PLANE DETAIL M PIN 1 IDENTIFIER 2.25 1.95 0.25 24X C VIEW ROTATED 90 ° CLOCKWISE B 19 6 (0.24) (0.5) M 0.1 C A B 0.05 C 7 24X VIEW M–M 0.5 20X 0.30 0.18 0.1 M C A B 0.05 M C (45 ° ) ° (90 ) DETAIL T (0.25) 24X 0.065 0.015 2X 0.39 0.31 (1.227) 2X 0.1 0.0 DETAIL N PREFERRED CORNER CONFIGURATION DETAIL T DETAIL M PREFERRED PIN 1 BACKSIDE IDENTIFIER PREFERRED PIN 1 BACKSIDE IDENTIFIER 4 (45 ° ) ° 2X 0.39 0.31 (0.4) (0.18) 0.60 0.24 DETAIL N CORNER CONFIGURATION OPTION 4 4 (90 ) DETAIL S 0.60 0.24 0.1 MIN DETAIL M PIN 1 BACKSIDE IDENTIFIER OPTION DETAIL S PIN 1 BACKSIDE IDENTIFIER OPTION 5 MOTOROLA RF PRODUCTS DEVICE DATA MC13751 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. MOTOROLA and the logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. E Motorola, Inc. 2002 How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447 Technical Information Center: 1–800–521–6274 JAPAN: Motorola Japan Ltd.; SPS, Technical Information Center, 3–20–1, Minami–Azabu. Minato–ku, Tokyo 106–8573 Japan. 81–3–3440–3569 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre, 2, Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong. 852–26668334 HOME PAGE: http://www.motorola.com/semiconductors/ ◊ MOTOROLA RF PRODUCTS DEVICE DATA MC13751/D 5