ALUMINUM ELECTROLYTIC CAPACITORS CB Chip Type, Long Life Assurance series Chip type with load life of 7000 hours at +105°C. Applicable to automatic mounting machine using carrier tape. Adapted to the RoHS directive (2002/95/EC). CB Long Life UL Low Impedance CW Specifications Item Performance Characteristics Category Temperature Range – 25 ~ +105°C Rated Voltage Range 6.3 ~ 50V Rated Capacitance Range 0.1 ~ 1000µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.03 CV or 4 (µA) , whichever is greater. Measurement frequency : 120Hz, Temperature : 20°C tan δ Rated voltage (V) tan δ (MAX.) 6.3 0.32 10 0.28 16 0.26 25 0.16 35 0.14 50 0.14 Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) 6.3 10 16 25 35 50 4 3 2 2 2 2 Z– 25°C / Z+20°C After 7000 hours' application of rated voltage at 105°C , capacitors meet the characteristic requirements listed at right. Endurance Capacitance change tan δ Leakage current Within ±30% of initial value 300% or less of initial specified value Initial specified value or less After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. The capacitors shall be kept on the hot plate maintained at 250°C Capacitance change Within ±10% of initial value for 30 seconds. After removing from the hot plate and restored tan δ Initial specified value or less at room temperature, they meet the characteristic requirements Leakage current Initial specified value or less listed at right. Shelf Life Resistance to soldering heat Black print on the case top. Marking Type numbering system (Example : 16V 100µF) Chip Type (φ4 ~ 6.3) E B± 0.2 φD±0.5 A2 100C CB L ±0.3 Capacitance Lot No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 UCB 1 C 1 0 1 MC L 1 GS A± 0.2 A ±0.2 C ±0.2 0.3MAX. Series 0.5MAX. Positive Plastic platform Voltage ( C : 16V ) Capacitance tolerance (±20%) Rated Capacitance (100µF) Rated voltage (16V) Series name Type Negative H (φ8 ~ 10 ) 0.3MAX. C±0.2 E B±0.2 A2 220V CB φD±0.5 Series L±0.5 Lot No. Voltage V 6.3 Code j Capacitance 10 A 16 C Pressure relief vent 25 E 35 V f H A±0.2 A±0.2 Plastic platform 0.5MAX. Positive Voltage ( V : 35V ) Trade mark Negative D´L A B C E L H Taping code Configuration fD Code 4 ~ 6.3 CL 8 ¥ 10 NL (mm) 4´7 5 ´ 7 6.3 ´ 7 6.3 ´ 8.7 8 ´ 10 10 ´ 10 1.8 2.1 2.4 2.4 2.9 3.2 4.3 5.3 6.6 6.6 8.3 10.3 4.3 5.3 6.6 6.6 8.3 10.3 4.5 1.0 1.3 2.2 2.2 3.1 10 7.0 7.0 7.0 8.7 10 0.5 ~ 0.8 0.5 ~ 0.8 0.5 ~ 0.8 0.5 ~ 0.8 0.8 ~ 1.1 0.8 ~ 1.1 50 H Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS CB series Dimensions Cap.(µF) V 6.3 10 16 25 35 50 Code 0J 1A 1C 1E 1V 1H 0.1 0R1 4×7 1.0 0.22 R22 4×7 2.6 0.33 R33 4×7 3.2 0.47 R47 4×7 3.8 1 010 4×7 2.2 2R2 4×7 11 3.3 3R3 4×7 14 4.7 4R7 4×7 15 4×7 18 5×7 25 5×7 30 6.3 × 7 42 6.3 × 8.7 57 10 100 22 220 33 330 47 470 5×7 36 6.3 × 7 100 101 6.3 × 7 60 6.3 × 8.7 220 221 6.3 × 8.7 101 330 331 8 × 10 160 470 471 1000 102 10 × 10 313 4×7 22 5×7 8 × 10 6.2 6.3 × 7 48 50 6.3 × 8.7 63 8 × 10 92 81 8 × 10 116 10 × 10 151 35 10 × 10 141 10 × 10 254 8 × 10 77 216 Case size Rated φ D × L (mm) ripple Rated Ripple (mArms) at 105°C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz~ 1.50 Taping specifications are given in page 24. Recommended land size, soldering by reflow are given in page 25, 26. Please refer to page 3 for the minimum order quantity. CAT.8100V