ALUMINUM ELECTROLYTIC CAPACITORS UA 6mmL Chip Type, Long Life Assurance series Chip type with load life of 3000 to 5000 hours at +105°C. Designed for surface mounting on high density PC board. Compliant to the RoHS directive (2002/95/EC). UA UL Long Life Long Life UT Specifications Item Performance Characteristics Category Temperature Range – 55 to +105°C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 0.1 to 1000µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3 (µA) , whichever is greater. Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.13 50 0.12 Measurement frequency : 120Hz Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 55°C / Z+20°C Stability at Low Temperature 6.3 4 10 10 3 7 16 2 5 25 2 3 35 2 3 50 2 3 The specifications listed at right shall be met Capacitance change Within ±30% of the initial capacitance value when the capacitors are restored to 20°C tan δ 300% or less than the initial specified value after the rated voltage is applied for 5000 Less than or equal to the initial specified value Leakage current hours (3000 hours for φD = 4, 5 and 6.3) at 105°C. After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, which is Capacitance change Within ±10% of the initial capacitance value maintained at 250°C. The capacitors shall meet the characteristic Less than or equal to the initial specified value tan δ requirements listed at right when they are removed from the plate Less than or equal to the initial specified value Leakage current and restored to 20°C. Endurance Shelf Life Resistance to soldering heat Black print on the case top. Marking Type numbering system (Example : 16V 10µF) Chip Type (φ4 to φ6.3) Positive 1 L±0.3 3 4 5 6 7 8 9 10 11 12 13 14 Taping code Configuration Capacitance tolerance (±20%) Rated capacitance (10 µF) Negative Capacitance Lot No. 2 UUA 1 C 1 0 0 MC L 1 GS E B±0.2 φD±0.5 A2 33 j UA C±0.2 A±0.2 A±0.2 0.3MAX. Series 0.5MAX. Plastic platform Voltage ( j : 6.3V) Rated voltage (16V) H φD 4 to 6.3 8 • 10 Code CL NL Series name Type (φ8 × 10, φ10 × 10 ) Voltage V 6.3 Code j Capacitance 10 A 16 C A±0.2 A±0.2 L±0.5 Lot No. (mm) φD E B±0.2 φD±0.5 C±0.2 0.5MAX. 0.3MAX. Series A2 100V UA Voltage ( V : 35V) Trade mark Positive Plastic platform Negative Pressure relief vent 25 E 35 V H ×L 10 × 10 4 × 5.8 5 × 5.8 6.3 × 5.8 6.3 × 7.7 8 × 10 A 1.8 2.1 2.4 2.4 2.9 3.2 B 4.3 5.3 6.6 6.6 8.3 10.3 C 4.3 5.3 6.6 6.6 8.3 10.3 E 1.0 1.3 2.2 2.2 3.1 4.5 L 5.8 5.8 5.8 7.7 10 10 H 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 50 H Dimension table in next page. CAT.8100B ALUMINUM ELECTROLYTIC CAPACITORS UA series Dimensions Cap.(µF) V 6.3 10 16 25 35 50 Code 0J 1A 1C 1E 1V 1H 0.1 0R1 4 × 5.8 1 0.22 R22 4 × 5.8 2.6 0.33 R33 4 × 5.8 3.2 0.47 R47 4 × 5.8 5 1 010 4 × 5.8 8 2.2 2R2 4 × 5.8 12 3.3 3R3 4.7 4R7 4 × 5.8 17 4 × 5.8 16 5 × 5.8 22 32 4 × 5.8 18 5 × 5.8 27 5 × 5.8 27 6.3 × 5.8 30 5 × 5.8 30 6.3 × 5.8 44 6.3 × 5.8 44 6.3 × 7.7 58 5 × 5.8 35 6.3 × 5.8 48 6.3 × 5.8 50 6.3 × 7.7 57 8 × 10 140 10 100 22 220 4 × 5.8 22 5 × 5.8 33 330 5 × 5.8 35 47 470 5 × 5.8 38 6.3 × 5.8 50 6.3 × 5.8 50 6.3 × 7.7 63 8 × 10 92 8 × 10 170 100 101 6.3 × 5.8 69 6.3 × 7.7 81 6.3 × 7.7 81 8 × 10 116 10 × 10 151 10 × 10 310 220 221 6.3 × 7.7 120 8 × 10 141 10 × 10 216 10 × 10 320 10 × 10 375 330 331 8 × 10 290 10 × 10 290 10 × 10 290 10 × 10 450 470 471 10 × 10 320 10 × 10 320 10 × 10 320 1000 102 10 × 10 410 Case size φ D × L (mm) Rated ripple Rated ripple current (mArms) at 105°C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. CAT.8100B