ALUMINUM ELECTROLYTIC CAPACITORS SP 7mmL, Bi-Polarized series Bi-polarized series with 7mm height. Extended capacitance range by an addition of φ8 product. Adapted to the RoHS directive (2002/95/EC). SP SA Bi-polarized Specifications Item Performance Characteristics Category Temperature Range – 40 ~ +85˚C Rated Voltage Range 6.3 ~ 50V Rated Capacitance Range 0.1 ~ 220µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.05CV or 10 (µA), whichever is greater. Measurement frequency : 120Hz, Temperature : 20˚C Rated voltage ( V) tan δ (MAX.) tan δ 6.3 0.24 10 0.20 16 0.16 25 0.16 35 0.14 50 0.12 Measurement frequency : 120 Hz Stability at Low Temperature 6.3 4 8 Rated voltage ( V) Z– 25˚C / Z+20˚C Impedance ratio Z– 40˚C / Z+20˚C ZT / Z20 (MAX.) After 2000 hours' application of rated voltage at 85˚C with the polarity inverted every 250 hours, capacitors meet the characteristic requirements listed at right. Endurance 10 3 6 16 2 4 25 2 4 35 2 3 50 2 3 Within ±20% of initial value 200% or less of initial specified value Initial specified value or less Capacitance change tan δ Leakage current After storing the capacitors under no load at 85˚C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with white color letter on black sleeve. Shelf Life Marking Type numbering system (Example : 10V 33µF) Radial Lead Type 1 2 3 4 5 6 7 8 9 10 11 US P 1 A 3 3 0 M DD φd Sleeve (P.E.T.) P ±0.5 φD+0.5MAX Configuration Capacitance tolerance (±20%) Rated Capacitance (33µF) Rated voltage (10V) L+1MAX 15MIN Series name (mm) 4MIN φD P φd 4 5 6.3 1.5 2.0 2.5 0.45 0.45 0.45 Type 8 3.5 0.5 Configuration Pb-free leadwire Pb-free PET sleeve φD 4~8 DD Dimensions V Cap.(µF) 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 Code 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 6.3 0J 0.5 × 7 6.3 × 7 0.8 × 7 0.8 × 7 10 1A 42 58 95 140 0.4 × 7 0.5 × 7 6.3 × 7 6.3 × 7 0.8 × 7 16 1C 24 40 56 67 110 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 18 30 51 63 75 125 0.5 × 7 6.3 × 7 6.3 × 7 0.8 × 7 0.8 × 7 21 35 53 73 87 0.4 × 7 0.5 × 7 6.3 × 7 0.8 × 7 0.8 × 7 16 22 37 62 76 50 1H 0.4 × 7 0.4 × 7 0.4 × 7 0.4 × 7 0.4 × 7 0.4 × 7 0.5 × 7 6.3 × 7 0.8 × 7 0.8 × 7 1.0 2.3 3.5 5.0 10 14 20 27 44 65 Case size φ D × L (mm) Rated ripple Rated Ripple (mArms) at 85˚C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 0.4 × 7 0.5 × 7 6.3 × 7 6.3 × 7 6.3 × 7 0.8 × 7 35 1V 25 1E 10 kHz ~ 1.50 Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. CAT.8100V