ALUMINUM ELECTROLYTIC CAPACITORS EP Bi-Polarized, Wide Temperature Range series Bi-polarized series for operations over wide temperature range of – 55°C to +105°C. Compliant to the RoHS directive (2011/65/EU). EP Wide Temperature VP Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Performance Characteristics –55 to +105°C 6.3 to 100V 0.47 to 6800µF ± 20% at 120Hz, 20°C After 5 minutes' application of rated voltage at 20°C, leakage current is not more than 0.03CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz, Temperature : 20°C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 6.3 0.24 10 0.24 16 0.20 25 0.20 35 0.16 50 0.14 63 0.12 100 0.10 Measurement frequency : 120Hz Stability at Low Temperature 6.3 4 10 Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C 10 3 8 16 2 6 25 2 4 The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 105°C with the polarity inverted every 250 hours. Endurance 35 2 3 50 2 3 Capacitance change tan δ Leakage current 63 2 3 100 2 3 Within ±25% of the initial capacitance value (6.3to16V) Within ±20% of the initial capacitance value (25to100V) 150% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on black sleeve. Shelf Life Marking Radial Lead Type Type numbering system (Example : 10V 47µF) 1 φd 2 3 4 5 6 7 8 9 10 11 UE P 1 A 4 7 0 M DD Configuration P±0.5 φD+0.5 MAX Sleeve (P.E.T.) Capacitance tolerance (±20%) Rated capacitance (47μF) Rated voltage (10V) Pressure relief vent 15MIN L+ MAX (φ6.3up) Series name 4MIN Type (mm) (L < 20) 1.5 (L 20) 2.0 φD P φd 5 2.0 0.5 6.3 2.5 0.5 8 3.5 0.6 10 5.0 0.6 12.5 5.0 0.6 16 7.5 0.8 Configuration 18 7.5 0.8 • Please refer to page 20 about the end seal configuration. Dimensions Cap. (µF) V Code R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 102 222 332 472 682 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 6800 6.3 0J 5 × 11 5 × 11 6.3 × 11 8 × 11.5 8 × 11.5 10 × 12.5 10 × 20 12.5 × 25 16 × 25 16 × 31.5 18 × 35.5 10 1A 46 54 90 150 185 260 460 820 1110 1430 1830 5 × 11 5 × 11 5 × 11 6.3 × 11 8 × 11.5 10 × 16 10 × 16 12.5 × 20 16 × 25 16 × 31.5 18 × 35.5 16 1C 42 45 54 90 150 240 290 510 910 1200 1520 5 × 11 5 × 11 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 25 16 × 31.5 18 × 35.5 25 1E 30 40 49 67 110 195 265 345 605 1070 1400 5 × 11 6.3 × 11 6.3 × 11 6.3 × 11 8 × 11.5 10 × 16 12.5 × 20 12.5 × 20 16 × 25 18 × 35.5 Frequency 50 Hz 5 DD 6.3 8 · 10 12.5 to 18 ED PD HD 35 1V 34 55 56 67 110 215 320 380 670 1140 5 × 11 5 × 11 6.3 × 11 8 × 11.5 8 × 11.5 10 × 16 12.5 × 20 12.5 × 20 12.5 × 25 16 × 31.5 25 30 51 72 86 160 290 350 465 805 50 1H 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 8 × 11.5 8 × 11.5 10 × 12.5 10 × 20 12.5 × 25 16 × 25 16 × 31.5 63 1J 8 12 18 22 22 37 63 77 105 190 340 460 590 5 × 11 6.3 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 12.5 × 20 16 × 25 16 × 31.5 18 × 35.5 20 31 40 68 98 130 225 405 535 680 100 2A 5 × 11 10 5 × 11 15 6.3 × 11 20 6.3 × 11 25 6.3 × 11 30 8 × 11.5 50 10 × 16 97 12.5 × 20 140 12.5 × 20 170 16 × 25 300 18 × 35.5 510 Case size Rated φ D × L (mm) ripple Rated ripple current (mArms) at 105°C 120Hz Frequency coefficient of rated ripple current 120Hz 300 Hz 0.47 to 47 0.75 1.00 1.35 1.57 2.00 0100 to 4700 0.80 1.00 1.23 1.34 1.50 1000 to 6800 0.85 1.00 1.10 1.13 1.15 Cap.(µF) Pb-free leadwire Pb-free PET sleeve φD 1 kHz 10 kHz or more Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100D