ALUMINUM ELECTROLYTIC CAPACITORS PZ High Voltage, Smaller-sized series High ripple current. Load life of 2000 hours at 105°C. Suited for ballast applications. Adapted to the RoHS directive (2002/95/EC). PT Smaller PZ Specifications Item Performance Characteristics Category Temperature Range – 25 ~ +105°C Rated Voltage Range 200 ~ 450V Rated Capacitance Range 18 ~ 470µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 1 minutes' application of rated voltage, leakage current is not more than 0.04CV+100 (µA). Measurement frequency : 120Hz, tan δ Rated voltage (V) tan δ (MAX.) 200 0.12 400 0.15 Temperature : 20°C 420 0.20 450 0.20 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Impedance ratio ZT / Z20 (MAX.) Z–25°C / Z+20°C 200 3 400 8 420 8 450 8 Endurance After an application of D.C. bias voltage plus the rated ripple current for 2000 hours at 105°C the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristic requirements listed at right. Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Capacitance change tan δ Leakage current Within ± 20% of initial value 200% or less of initial specified value Initial specified value or less Type numbering system (Example : 200V 220µF) Radial Lead Type 1 2 3 4 5 6 7 8 9 10 11 12 f f P ± 0.5 D±0.5MAX. Sleeve (P.E.T.) U PZ 2D 2 2 1 M HD T d L+ 2.0 MAX. Pressure relief vent 15MIN 4MIN (mm) D 10 12.5 16 18 P 5.0 5.0 7.5 7.5 fd 0.6 0.8 0.8 0.8 f Size code Configuration Capacitance tolerance (±20%) Rated Capacitance (220µF) Rated voltage (200V) Series name Type Configuration Pb-free leadwire fD Pb-free PET sleeve 10 PD 12.5 ~ 18 HD • Please refer to page 21 about the end seal configulation. Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS PZ series Dimensions Cap.(µF) V 200 400 420 Code 2D 2G W6 18 180 22 220 27 270 33 330 39 390 47 470 12.5 × 31.5 56 560 68 680 82 820 101 120 121 150 151 12.5 × 31.5 620 180 181 12.5 × 35.5 700 220 221 12.5 × 40.0 800 270 271 .016 × 31.5 870 .016 × 35.5 1010 .018 × 31.5 1010 .016 × 40.0 1130 .018 × 35.5 1120 .018 × 40.0 1270 330 331 390 391 470 471 180 200 12.5 × 31.5 280 12.5 × 31.5 310 12.5 × 35.5 320 370 12.5 × 35.5 360 12.5 × 40.0 380 12.5 × 35.5 420 12.5 × 40.0 430 .016 × 31.5 440 12.5 × 40.0 480 .016 × 31.5 510 .016 × 35.5 490 .016 × 40.0 550 .018 × 31.5 550 .018 × 35.5 650 .018 × 40.0 740 240 400 100 2W .010 × 31.5 .010 × 31.5 .010 × 31.5 .010 × 31.5 450 .016 × 31.5 580 .016 × 35.5 670 .018 × 31.5 670 .016 × 40.0 770 .018 × 35.5 770 .018 × 40.0 880 .016 × 35.5 570 .016 × 40.0 610 .018 × 31.5 610 .018 × 35.5 660 .018 × 40.0 710 Case size φ D × L (mm) Rated Ripple Rated Ripple (mArms) at 105°C 120Hz : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current V 60Hz 120Hz 500Hz 1kHz 10kHz~ 200 0.80 1.00 1.20 1.30 1.40 400 ~ 450 0.80 1.00 1.25 1.40 1.50 CAT.8100V