FEDR27V1652L-02-01 OKI Semiconductor MR27V1652L 1M–Word × 16–Bit or 2M–Word × 8–Bit Page Mode Issue Date: Jun. 16, 2005 P2ROM FEATURES PIN CONFIGURATION (TOP VIEW) · 1,048,576-word × 16-bit / 2,097,152-word × 8-bit electrically switchable configuration · Page size of 8-word x 16-Bit or 16-word x 8-Bit · 3.0 V to 3.6 V power supply ·Random Access time 100 ns MAX ·Page Access time 30 ns MAX · Operating current 60 mA MAX (5MHz) · Standby current 10 µA MAX · Input/Output TTL compatible · Three-state output PACKAGES · MR27V1652L-xxxMA 44-pin plastic SOP (SOP44-P-600-1.27-K) NC A18 A17 A7 A6 A5 A4 A3 A2 A1 A0 CE# VSS OE# D0 D8 D1 D9 D2 D10 D3 D11 1 44 NC 2 43 A19 3 42 A8 4 41 A9 5 40 A10 6 39 A11 7 38 A12 8 37 A13 9 36 A14 10 35 A15 11 34 A16 12 33 BYTE# 13 32 VSS 14 31 D15/A–1 15 30 D7 16 29 D14 17 28 D6 18 27 D13 19 26 D5 20 25 D12 21 24 D4 22 23 VCC 44SOP P2ROM ADVANCED TECHNOLOGY P2ROM stands for Production Programmed ROM. This exclusive Oki technology utilizes factory test equipment for programming the customers code into the P2ROM prior to final production testing. Advancements in this technology allows production costs to be equivalent to MASKROM and has many advantages and added benefits over the other non-volatile technologies, which include the following; · Short lead time, since the P2ROM is programmed at the final stage of the production process, a large P2ROM inventory "bank system" of un-programmed packaged products are maintained to provide an aggressive lead-time and minimize liability as a custom product. · No mask charge, since P2ROMs do not utilize a custom mask for storing customer code, no mask charges apply. · No additional programming charge, unlike Flash and OTP that require additional programming and handling costs, the P2ROM already has the code loaded at the factory with minimal effect on the production throughput. The cost is included in the unit price. · Custom Marking is available at no additional charge. · Pin Compatible with Mask ROM and some FLASH products. 1/8 FEDR27V1652L-02-01 OKI Semiconductor MR27V1652L / P2ROM BLOCK DIAGRAM A–1 OE# CE OE BYTE# Row Decoder CE# Memory Cell Matrix 1M × 16-Bit or 2M × 8-Bit Column Decoder A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 Address Buffer × 8/× 16 Switch Multiplexer Output Buffer D0 D2 D1 D4 D3 D6 D5 D8 D7 D10 D9 D12 D11 D14 D13 D15 In 8-bit output mode, these pins are placed in a high-Z state and pin D15 functions as the A-1 address pin. PIN DESCRIPTIONS Pin name Functions D15 / A–1 Data output / Address input A0 to A19 Address inputs D0 to D14 Data outputs CE# Chip enable input OE# Output enable input BYTE# Word / Byte select input VCC Power supply voltage VSS Ground NC No connect 2/8 FEDR27V1652L-02-01 OKI Semiconductor MR27V1652L / P2ROM FUNCTION TABLE Mode CE# OE# BYTE# Read (16-Bit) L L H Read (8-Bit) L L VCC L H Standby H ∗ D8 to D14 D15/A–1 DOUT L Output disable D0 to D7 DOUT H Hi–Z Hi–Z 3.3 V L L/H H ∗ Hi–Z L ∗ ∗: Don’t Care (H or L) ABSOLUTE MAXIMUM RATINGS Parameter Symbol Operating temperature under bias Ta Storage temperature Condition VI Output voltage VO Power supply voltage VCC Unit °C –55 to 125 °C –0.5 to VCC+0.5 V –0.5 to VCC+0.5 V –0.5 to 5 V — Tstg Input voltage Value 0 to 70 relative to VSS Power dissipation per package PD Ta = 25°C 1.0 W Output short circuit current IOS — 10 mA RECOMMENDED OPERATING CONDITIONS (Ta = 0 to 70°C) Parameter Symbol VCC power supply voltage VCC Input “H” level VIH Input “L” level VIL Condition Min. Typ. Max. Unit 3.0 — 3.6 V 2.2 — VCC+0.5∗ V –0.5∗∗ — 0.6 V VCC = 3.0 to 3.6 V Voltage is relative to VSS. ∗ : Vcc+1.5V(Max.) when pulse width of overshoot is less than 10ns. ∗∗ : -1.5V(Min.) when pulse width of undershoot is less than 10ns. PIN CAPACITANCE (VCC = 3.3 V, Ta = 25°C, f = 1 MHz) Parameter Symbol Input CIN1 BYTE# CIN2 Output COUT Condition VI = 0 V VO = 0 V Min. Typ. Max. — — 10 — — 120 — — 10 Unit pF 3/8 FEDR27V1652L-02-01 OKI Semiconductor MR27V1652L / P2ROM ELECTRICAL CHARACTERISTICS DC Characteristics (VCC = 3.0 V to 3.6 V, Ta = 0 to 70°C) Symbol Condition Min. Typ. Max. Unit Input leakage current Parameter ILI VI = 0 to VCC — — 10 µA Output leakage current ILO VO = 0 to VCC — — 10 µA VCC power supply current ICCSC CE# = VCC — — 10 µA (Standby) ICCST CE# = VIH — — 1 mA — — 60 mA — 2.2 — VCC+0.5∗ V VCC power supply current (Read) Input “H” level CE#= VIL, OE# = VIH, ICCA f = 5MHz VIH Input “L” level VIL — –0.5∗∗ — 0.6 V Output “H” level VOH IOH = –1 mA 2.4 — — V Output “L” level VOL IOL = 2 mA — — 0.4 V Voltage is relative to VSS. ∗ : Vcc+1.5V(Max.) when pulse width of overshoot is less than 10ns. ∗∗ : -1.5V(Min.) when pulse width of undershoot is less than 10ns. AC Characteristics (VCC = 3.0 V to 3.6 V, Ta = 0 to 70°C) Parameter Symbol Address cycle time Address access time Condition Min. Max. Unit tC — 100 — ns tACC CE# = OE# = VIL — 100 ns Page cycle time tPC — 30 — ns Page access time tPAC — — 30 ns CE# access time tCE OE# = VIL — 100 ns OE# access time Output disable time Output hold time tOE CE# = VIL — 30 ns tCHZ OE# = VIL 0 20 ns tOHZ CE# = VIL 0 20 ns tOH CE# = OE# = VIL 0 — ns Measurement conditions Input signal level --------------------------------------0 V/3 V Input timing reference level-------------------------1/2Vcc Output load ---------------------------------------------50 pF Output timing reference level ----------------------1/2Vcc Output load Output 50 pF (Including scope and jig) 4/8 FEDR27V1652L-02-01 OKI Semiconductor MR27V1652L / P2ROM TIMING CHART (READ CYCLE) Random Access Mode Read Cycle tC tC Address tOH tACC tCE CE# tCHZ tOE tOH OE# tOHZ tACC Dout Valid Data Valid Data Hi-Z Hi-Z Page Access Mode Read Cycle tC A3 to A19 tPC tPC A-1 to A2 (Byte mode) A0 to A2 (Word mode) tCE tOH CE# tOE tCHZ OE# tACC Dout Hi-Z tPAC tPAC tOHZ Hi-Z 5/8 FEDR27V1652L-02-01 OKI Semiconductor MR27V1652L / P2ROM PACKAGE DIMENSIONS (Unit: mm) SOP44-P-600-1.27-K Mirror finish 5 Package material Lead frame material Pin treatment Package weight (g) Rev. No./Last Revised Epoxy resin 42 alloy Solder plating (≥5µm) 2.10 TYP. 4/Dec. 5, 1996 Notes for Mounting the Surface Mount Type Package The surface mount type packages are very susceptible to heat in reflow mounting and humidity absorbed in storage. Therefore, before you perform reflow mounting, contact Oki’s responsible sales person for the product name, package name, pin number, package code and desired mounting conditions (reflow method, temperature and times). 6/8 FEDR27V1652L-02-01 OKI Semiconductor MR27V1652L / P2ROM REVISION HISTORY Document No. FEDR27V1652L-02-01 Page Date Previous Edition Current Edition Jun. 16, 2005 – – Description Final edition 1 7/8 FEDR27V1652L-02-01 OKI Semiconductor MR27V1652L / P2ROM NOTICE 1. The information contained herein can change without notice owing to product and/or technical improvements. Before using the product, please make sure that the information being referred to is up-to-date. 2. The outline of action and examples for application circuits described herein have been chosen as an explanation for the standard action and performance of the product. When planning to use the product, please ensure that the external conditions are reflected in the actual circuit, assembly, and program designs. 3. When designing your product, please use our product below the specified maximum ratings and within the specified operating ranges including, but not limited to, operating voltage, power dissipation, and operating temperature. 4. Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation resulting from misuse, neglect, improper installation, repair, alteration or accident, improper handling, or unusual physical or electrical stress including, but not limited to, exposure to parameters beyond the specified maximum ratings or operation outside the specified operating range. 5. Neither indemnity against nor license of a third party’s industrial and intellectual property right, etc. is granted by us in connection with the use of the product and/or the information and drawings contained herein. No responsibility is assumed by us for any infringement of a third party’s right which may result from the use thereof. 6. The products listed in this document are intended for use in general electronics equipment for commercial applications (e.g., office automation, communication equipment, measurement equipment, consumer electronics, etc.). These products are not, unless specifically authorized by Oki, authorized for use in any system or application that requires special or enhanced quality and reliability characteristics nor in any system or application where the failure of such system or application may result in the loss or damage of property, or death or injury to humans. Such applications include, but are not limited to, traffic and automotive equipment, safety devices, aerospace equipment, nuclear power control, medical equipment, and life-support systems. 7. Certain products in this document may need government approval before they can be exported to particular countries. The purchaser assumes the responsibility of determining the legality of export of these products and will take appropriate and necessary steps at their own expense for these. 8. No part of the contents contained herein may be reprinted or reproduced without our prior permission. Copyright 2005 Oki Electric Industry Co., Ltd. 8/8