NUF6107MN 4 Channel Data Line EMI Filter with 2 Channel USB Filter and ESD Protection This device is a four-channel EMI filter array for data lines. Greater than -35 dB attenuation is obtained at frequencies from 800 MHz to 2.2 GHz. It also offers USB filtering circuitry with speed detection. This includes the inline resistors for impedance matching and EMI filtering. ESD protection is provided across all capacitors. Features http://onsemi.com R1 1 12 C1 R2 2 •EMI Filtering and ESD Protection for Data Lines •USB 1.1 and 2.0 Full Speed Filtering Provided •Integration of 26 Discretes Offers Cost and Space Savings •Low Profile DFN, Packaging, 3.0 x 1.35 mm •MSL 1 •Compliant with IEC61000-4-2 (Level 4) C3 D3 C5 D5 4 5 C4 D4 9 C6 D6 R5 5 3 R3 R4 4 •EMI and USB Filtering and ESD Protection for Data Lines •Cell Phones •Handheld Portables •Notebook Computers •MP3 Players D2 10 3 Typical Applications 2 11 C2 > 8 kV Contact on all outputs and data lines •This is a Pb-Free Device 1 D1 D7 8 C8 C7 D8 R6 7 6 C9 D9 C10 D10 (Top View) 6 MARKING DIAGRAM 1 GND 12 DFN12 CASE 506AD 1 12 11 10 9 8 (Bottom View) 61 07 MG G 7 6107= Specific Device Code M = Month G = Pb-Free Package (Note: Microdot may be in either location) Figure 1. Pin Connections ORDERING INFORMATION Device Package Shipping† NUF6107MNTBG DFN12 (Pb-Free) 3000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2007 December, 2007 - Rev. 1 1 Publication Order Number: NUF6107MN/D NUF6107MN MAXIMUM RATINGS Parameter Symbol ESD Discharge IEC61000-4-2 pins 1 to 10 pins 11 to 12 Contact Discharge Value VPP Unit kV 2.0 8.0 Operating Temperature Range TOP -40 to 85 °C Storage Temperature Range TSTG -55 to 150 °C TL 260 °C Maximum Lead Temperature for Soldering Purposes (1.8 in from case for 10 seconds) Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Parameter Maximum Reverse Working Voltage Breakdown Voltage Leakage Current Symbol Test Conditions VRWM Min Typ Max Unit - - 5.0 V VBR IR = 1.0 mA 6.0 6.8 8.0 V IR VRWM = 3.3 V per line - - 0.1 mA EMI Filter Resistors R3 - R6 80 100 120 W USB Resistors; Impedance Matching R1, R2 18 22 26 W Diode Capacitance C3 - C10 VR = 2.5 V 24 30 36 pF Diode Capacitance C1, C2 VR = 2.5 V 29 36 43 pF http://onsemi.com 2 NUF6107MN PACKAGE DIMENSIONS DFN12 3.0x1.35, 0.5P CASE 506AD-01 ISSUE G 2X 0.15 C A NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.25 AND 0.30 MM FROM TERMINAL. 4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. 5. EXPOSED PADS CONNECTED TO DIE FLAG. USED AS TEST CONTACTS. D B (A3) E 2X 0.15 C EXPOSED Cu TOP VIEW PIN ONE REFERENCE (A3) 0.10 C A 12 X 0.08 C SEATING PLANE SIDE VIEW A1 2X 0.2 X 0.25 MM NOTE 5 12 X DIM A A1 A3 b D D2 E E2 e K L D2 L 1 12 X K C MILLIMETERS MIN MAX 0.80 1.00 0.00 0.05 0.20 REF 0.18 0.30 3.00 BSC 2.10 2.30 1.35 BSC 0.20 0.40 0.50 BSC 0.20 --0.20 0.40 12 e SOLDERING FOOTPRINT* EXPOSED PAD 6 E2 7 12 X 2.352 0.093 0.351 0.014 b 0.10 C A B BOTTOM VIEW 0.05 C NOTE 3 0.265 0.01 0.479 0.019 SCALE 16:1 mm Ǔ ǒinches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 3 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NUF6107MN/D