NUF4211MN Low Capacitance 4 Line EMI Filter with ESD Protection This device is a 4 line EMI filter array for wireless applications. Greater than −20 dB attenuation is obtained at frequencies from 800 MHz to 3.0 GHz. It also offers ESD protection−clamping transients from static discharges. ESD protection is provided across all capacitors. Features • 1 8 Cd Cd Cd Cd Cd Cd Cd Cd 2 • EMI Filtering and ESD Protection • Integration of 20 Discrete Components • Compliance with IEC61000−4−2 (Level 4) • • • http://onsemi.com 7 3 >8 kV (Contact) DFN Package, 2 x 2 mm Moisture Sensitivity Level 1 ESD Ratings: Machine Model = C Human Body Model = 3B This is a Pb−Free Device* 6 4 5 (Top View) Benefits MARKING DIAGRAM • Reduces EMI/RFI Emmisions on a Data Line • Integrated Solution Offers Cost and Space Savings • Reduces Parasitic Inductances Which Offer a More “Ideal” Low Pass Filter Response 1 • Integrated Solution Improves System Reliability U5 M 1 4 U5 = Specific Device Code M = Date Code Applications • • • • • DFN8 CASE 506AA PLASTIC EMI Filtering and ESD Protection for Data Lines Wireless Phones Handheld Products Notebook Computers LCD Displays 1 2 3 4 GND 8 7 6 5 (Bottom View) ORDERING INFORMATION *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2007 February, 2007 − Rev. 0 1 Device Package Shipping† NUF4211MNT1G DFN8 (Pb−Free) 3000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Publication Order Number: NUF4211MN/D NUF4211MN MAXIMUM RATINGS Parameter Symbol ESD Discharge IEC61000−4−2 Value VPP Unit kV Contact Discharge Machine Model Human Body Model 8.0 0.4 8.0 Operating Temperature Range TOP −40 to 85 °C Storage Temperature Range TSTG −55 to 150 °C TL 260 °C Maximum Lead Temperature for Soldering Purposes (1.8 in from case for 10 seconds) Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted) Parameter Maximum Reverse Working Voltage Breakdown Voltage Symbol Test Conditions Min Typ Max Unit 5.0 V 8.0 V 100 nA 100 115 8.5 11 VRWM VBR IR = 1.0 mA Leakage Current IR VRWM = 3.3 V Resistance RA IR = 10 mA 85 Capacitance (Notes 1 and 2) Cd VR = 2.5 V, f = 1.0 MHz − Cut−Off Frequency (Note 3) f3dB Above this frequency, appreciable attenuation occurs 1. Measured at 25°C. 2. Total Line Capacitance is two times the Diode Capacitance (Cd). 3. 50 source and 50 load termination. http://onsemi.com 2 6.0 7.0 250 pF MHz NUF4211MN TYPICAL PERFORMANCE CURVES (TA= 25°C unless otherwise specified) 0 −5 −10 S21 (dB) −15 −20 −25 −30 −35 −40 −45 1.0E+6 1.0E+7 1.0E+8 1.0E+9 1.0E+10 FREQUENCY (Hz) 1.6 110 1.4 108 106 1.2 RESISTANCE () NORMALIZED CAPACITANCE Figure 1. Insertion Loss Characteristic 1.0 0.8 0.6 0.4 102 100 98 96 94 0.2 0 104 92 0 1.0 2.0 3.0 4.0 90 −40 5.0 −20 0 20 40 60 80 REVERSE VOLTAGE (V) TEMPERATURE (°C) Figure 2. Typical Capacitance Figure 3. Typical Resistance over Temperature http://onsemi.com 3 NUF4211MN PACKAGE DIMENSIONS DFN8 CASE 506AA−01 ISSUE C D NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994 . 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.25 AND 0.30 MM FROM TERMINAL. 4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. A B PIN ONE REFERENCE 2X 0.10 C 2X 0.10 C ÇÇÇ ÇÇÇ ÇÇÇ ÇÇÇ TOP VIEW 0.08 C SEATING PLANE MILLIMETERS MIN MAX 0.80 1.00 0.00 0.05 0.20 REF 0.20 0.30 2.00 BSC 1.10 1.30 2.00 BSC 0.70 0.90 0.50 BSC 0.20 −−− 0.25 0.35 A 0.10 C 8X DIM A A1 A3 b D D2 E E2 e K L E (A3) SIDE VIEW A1 C D2 e e/2 4 1 8X L E2 K 8 5 8X b 0.10 C A B 0.05 C NOTE 3 BOTTOM VIEW ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NUF4211MN/D http://onsemi.com 4