SB3003CH Ordering number : EN8964 SANYO Semiconductors DATA SHEET SB3003CH Low IR Schottky Barrier Diode 30V, 3.0A Rectifier Applications • High frequency rectification (switching regulators, converters, choppers). Features • • • Small switching noise. Low leakage current and high reliability due to highly reliable planar structure. Ultrasmall package permitting applied sets to be small and slim (Mounting height 0.9mm). Specifications Absolute Maximum Ratings at Ta=25°C Parameter Repetitive Peak Reverse Voltage Symbol Conditions Ratings Unit VRRM VRSM 30 V 35 V Average Output Current IO 3.0 A Surge Forward Current IFSM 20 A Nonrepetitive Peak Reverse Surge Voltage 50Hz sine wave, 1 cycle Junction Temperature Tj --55 to +125 °C Storage Temperature Tstg --55 to +125 °C Electrical Characteristics at Ta=25°C Parameter Reverse Voltage Forward Voltage Reverse Current Symbol VR VF1 IR=0.5mA IF=2.0A VF2 IF=3.0A VR=15V VR=10V, f=1MHz IR Interterminal Capacitance C Reverse Recovery Time trr Thermal Resistance Rth(j-a) Ratings Conditions min typ Unit max 30 V 0.435 0.485 0.47 0.52 V 42 µA 90 IF=IR=100mA, See specified Test Circuit. Mounted on a ceramic board (900mm2✕0.8mm) V pF 20 50 ns °C / W Marking : SF Any and all SANYO Semiconductor products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO Semiconductor representative nearest you before usingany SANYO Semiconductor products described or contained herein in such applications. SANYO Semiconductor assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor products described or contained herein. TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 72606 / 32406SB MS IM TB-00002131 No.8964-1/3 SB3003CH Package Dimensions unit : mm 7018-012 Electrical Connection 0.4 5 5 4 1 2 3 1 : Cathode 2 : Cathode 3 : No Contact 4 : Anode 5 : Cathode 6 : Cathode 0.15 4 0.2 2.8 0.05 Top view 0.6 1.6 0.6 6 6 1 3 2 1 : Cathode 2 : Cathode 3 : No contact 4 : Anode 5 : Cathode 6 : Cathode 0.95 0.7 0.9 0.2 2.9 SANYO : CPH6 trr Test Cicuit 50Ω 100Ω 10Ω 10µs 10mA 100mA 100mA Duty≤10% --5V trr IF -- VF 10 7 5 Reverse Current, IR -- µA 2 1.0 7 5 3 2 0.1 7 5 25° 100 C °C 75° C 50°C 25°C 0°C --25° C Forward Current, IF -- A Ta=125°C 100°C 1000 3 2 75°C 100 50°C 10 25°C 1.0 0°C 0.1 --25°C 0.01 Ta= 1 3 0.001 0.01 0.1 0.2 0.3 0.4 0.5 0.6 Forward Voltage, VF -- V (1) Rectangular wave 1.8 (2) (4) (3) θ 1.6 360° 1.4 Sine wave 1.2 180° 1.0 360° 0.8 0.6 (1)Rectangular wave θ=60° (2)Rectangular wave θ=120° (3)Rectangular wave θ=180° (4)Sine wave θ=180° 0.4 0.2 0 0 0.5 1.0 1.5 2.0 5 10 2.5 Average Output Current, IO -- A 3.0 3.5 IT09870 15 20 25 30 Reverse Voltage, VR -- V IT09868 PF(AV) -- IO 2.0 0 0.7 Average Reverse Power Dissipation, PR(AV) -- W 0 Average Forward Power Dissipation, PF(AV) -- W IR -- VR 10000 35 IT09869 PR(AV) -- VR 4.00E--04 (1)Rectangular wave θ=300° (2)Rectangular wave θ=240° (3)Rectangular wave θ=180° (4)Sine wave θ=180° 3.50E--04 3.00E--04 (2) 360° θ Rectangular wave V 2.50E--04 (1) R (3) 2.00E--04 Sine wave 360° 180° 1.50E--04 VR 1.00E--04 (4) 5.00E--05 0.00E+00 0 5 10 15 20 25 Peak Reverse Voltage, VR -- V 30 35 IT10631 No.8964-2/3 SB3003CH Tc -- IO 140 (1)Rectangular wave θ=60° (2)Rectangular wave θ=120° (3)Rectangular wave θ=180° (4)Sine wave θ=180° 100 5 Interterminal Capacitance, C -- pF Case Temperature, Tc -- °C 120 *When mounted in reliability operaion board, Rth(J-a)=50°C/W 80 60 Rectangular wave θ 40 360° 20 Sine wave (1) (2) (4) C -- VR 7 (3) 180° 3 2 100 7 5 360° 0 0 0.5 1.0 1.5 2.0 2.5 3.0 Average Output Current, IO -- A IT10632 IFSM -- t 24 Surge Forward Current, IFSM(Peak) -- A 3.5 3 0.1 2 3 5 7 1.0 2 3 5 7 10 2 Reverse Voltage, VR -- V 3 5 IT09871 Current waveform 50Hz sine wave IS 20 20ms t 16 12 8 4 0 7 0.01 2 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 2 3 ID00523 Specifications of any and all SANYO Semiconductor products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor products (including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO Semiconductor believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 2006. Specifications and information herein are subject to change without notice. PS No.8964-3/3